Zte MF730M Manuel utilisateur

MF730M

DC-HSPA+ USB MODEM

Your Quick Guide

ZTE CORPORATION

NO. 55, Hi-tech Road South, ShenZhen, P.R.China

Postcode: 518057

Tel: +86-755-26779999

URL: http://www.zte.com.cn

E-mail: [email protected]

LEGAL INFORMATION

This guide is published by ZTE Corporation, which reserves the right to amend or update

its content without prior notice. No part of this guide may be reproduced, translated or used

in any form or by any means, electronic or mechanical, including photocopying and

microfilm, without the prior written permission of ZTE Corporation.

Version No.: 1.0

Edition Time: 2013, 07

Confidential and Proprietary Information of ZTE CORPORATION 1

Welcome

The ZTE MF730M USB modem works on all the following networks: DC-HSDPA; HSPA+;

HSUPA; WCDMA; EDGE; GPRS, and GSM.

Getting to know your device

1. microSD card slot

2. SIM/USIM card slot

3. USB Connector

4. Modem Cap

5. Front Cover

(Device appearance and detail may vary.)

Understanding the indicator light

Indicator status Description

Red On but not connected to network

Green Blinking Connecting to 2G/3G and data transfer

Green Solid Connected to 2G/3G

2 Confidential and Proprietary Information of ZTE CORPORATION

Five simple steps and you’ll be online…

1. Open the front cover – gently sliding it back to avoid damage.

2. Insert a standard-size SIM card.

3. If you have one, Insert the microSD card.

This modem only supports microSD card. (The microSD Logo ( ) is a trademark of SD

Card Association.)

4. Replace the front cover, clicking it into place.

Confidential and Proprietary Information of ZTE CORPORATION 3

5. Firmly plug the USB connector into your computer’s USB port.

The computer operating system will automatically recognise the new hardware. Depending on

the make and operating system of your PC, you will be taken to the operator’s landing page

or the device administration page (if the device doesn’t connect). The LED indicator lights

(see above) will show the connectivity status during the start up process.

6. Settings – Accessing the Web User Interface (UI).

From the Home page of the Web UI you can access the main settings for: Statistics, Messages,

Updates, Settings and to check the device status. You can access the URL (http://m.home or

http://192.168.0.1 )via your web browser.

You should never need to change the settings; this is recommended for advanced users only.

Disconnect from the Network - To disconnect from the network, just remove the dongle from the

PC directly.

Staying safe

• Some electronic devices – like vehicle systems – are susceptible to electromagnetic

interference from modems. If you are concerned, please consult the device

manufacturer before using your modem.

• Modems can interfere with medical devices, such as hearing aids and pacemakers.

Please consult a doctor or the manufacturer of the device before using yours. And

always keep it more than 20cm away from medical devices.

• Always turn off your modem in potentially explosive environments, such chemical

factories, unless you have been told by a qualified professional that it is safe to use.

• The use of electronic transmitting devices is forbidden in aircrafts, at petrol stations

and in some hospitals. Please observe and obey all warning signs and switch off your

modem when requested.

• Please keep your modem out of the reach of children. It’s not a toy and could cause

4 Confidential and Proprietary Information of ZTE CORPORATION

injury.

• When the modem is on, please don’t touch its metallic parts. They get hot and could

burn you.

Taking care

• Try not to not touch any internal parts, such as the antenna, as it could affect your

modem’s performance.

• Only use original or authorised accessories with your modem. Unauthorised

accessories may affect your modem’s performance, violate telecom regulations or

invalidate the warranty.

• Don’t be tempted to dismantle your modem. Remember that only qualified

technicians can undertake repair work, otherwise your warranty will become void.

• Your modem might not work so well near or inside metallic structures or

establishments which emit electromagnetic waves and interfere with the signal.

• Your modem is not waterproof. Please keep it dry and store in a cool place, out of

direct sunlight.

• To avoid producing potentially damaging condensation inside and outside the modem,

do not use it immediately after a sudden temperature change. Please wait until it dries

before using it. (An operating temperature range of -10℃~ +55℃and humidity range

of 5% ~ 95% is what we recommend.)

• Your modem is a delicate device and needs careful handling to avoid damage. It

won’t like being dropped, bent or bashed.

Got a question or a problem? Please contact your network operator.

Confidential and Proprietary Information of ZTE CORPORATION 5

Troubleshooting

Problem Solution

You’ve plugged it into the

USB port but nothing is

happening…

Install the software. Run the installation program: My

Computer > ZTEMODEM

Reinstall the driver software. You’ll need to uninstall the software

first.

You can’t get onto the

Internet…

Make sure the SIM card is correctly inserted in its slot.

Check the signal – if it’s poor, find a location where the signal is

stronger.

Contact your network operator.

You can’t visit the webGUI

configuration page…

Enter the correct address. The default address is http://192.168.0.1

or http://m.home.

Make sure you only have one network adapter connected to your

PC.

Don’t use a proxy server.

Your Limited Warranty

• This warranty does not apply to defects or errors in the product caused by:

i. Reasonable abrasion.

ii. Failure to follow ZTE’s installation, operation or maintenance instructions or

procedures.

iii. Mishandling, misuse, negligence, or improper installation, disassembly, storage,

servicing or operation of the product.

iv. Modifications or repairs not made by ZTE or a ZTE-certified individual.

v. Power failures, surges, fire, flood, accidents, actions of third parties or other

events outside ZTE’s reasonable control.

vi. Third party products or usage in conjunction with third party products, provided

that such defects are due to the combined usage.

vii. Any other cause beyond the range of normal usage intended for the product.

There is no right to reject or return the product, or receive a refund from ZTE under the

above-mentioned situations.

• This warranty is the end user’s sole remedy and ZTE’s sole liability for defective or

nonconforming items, and is in lieu of all other warranties, expressed, implied or

6 Confidential and Proprietary Information of ZTE CORPORATION

statutory, including but not limited to the implied warranties of merchantability and

fitness for a particular purpose, unless otherwise required under the mandatory

provisions of the law.

Limitation of Liability

ZTE shall not be liable for any loss of profits or indirect, special, incidental or

consequential damages resulting from or arising out of, or in connection with, using this

product, whether or not ZTE had been advised, knew or should have known of the

possibility of such damages, including, but not limited to lost profits, interruption of

business, cost of capital, cost of substitute facilities or products, or any downtime cost.

FCC Regulations:

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

This device has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiated radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Confidential and Proprietary Information of ZTE CORPORATION 7

Changes or modifications not expressly approved by the party responsible for

compliance could void the user‘s authority to operate the equipment.

RF Exposure Information (SAR)

This device meets the government’s requirements for exposure to radio waves. This

device is designed and manufactured not to exceed the emission limits for exposure to

radio frequency (RF) energy set by the Federal Communications Commission of the U.S.

Government. The exposure standard for wireless device employs a unit of measurement

known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.

*Tests for SAR are conducted using standard operating positions accepted by the FCC

with the device transmitting at its highest certified power level in all tested frequency

bands. Although the SAR is determined at the highest certified power level, the actual

SAR level of the device while operating can be well below the maximum value. This is

because the device is designed to operate at multiple power levels so as to use only the

poser required to reach the network. In general, the closer you are to a wireless base

station antenna, the lower the power output. SAR compliance has been established in

the host product(s) (laptop computers), tested at 5mm separation distance to the human

body, and tested with USB slot configurations including Horizontal-UP, Horizontal-Down,

Vertical-Front, Vertical-Back. This device can be used in host product(s) with

substantially similar physical dimensions, construction, and electrical and RF

characteristics. The highest SAR value, tested per FCC RF exposure guidelines for USB

dongle, as described in this user guide, is 1.18 W/kg. The FCC has granted an

Equipment Authorization for this device with all reported SAR levels evaluated as in

compliance with the FCC RF exposure guidelines. SAR information on this device is on

file with the FCC and can be found under the Display Grant section of

www.fcc.gov/oet/ea/fccid after searching on FCC ID: SRQMF730M.

Autres manuels pour MF730M

Table des matières

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur

Zoom

Zoom 1070 Series Manuel utilisateur

Aztech

Aztech HW831 Manuel utilisateur