Zte MF83M Manuel utilisateur

Table des matières

Autres manuels Zte Téléphone portable

Manuels Téléphone portable populaires d'autres marques

Nokia

Nokia Lumia 620 Manuel utilisateur

Blackbe;rry

Blackbe;rry KEYone Manuel utilisateur

Bea-fon

Bea-fon X5 Premium Manuel utilisateur

Blackbe;rry

Blackbe;rry 8707 Series Manuel utilisateur

Blackbe;rry

Blackbe;rry Storm Mode d'emploi

LG

LG LM-X420QN Manuel utilisateur

LifeWatch

LifeWatch V Manuel utilisateur

Bea-fon

Bea-fon SILVER LINE SL860 Manuel utilisateur

IKI Mobile

IKI Mobile KF4.5i Manuel utilisateur

Hitech

Hitech HT-850 Manuel utilisateur

Yezz

Yezz Fashion F10 Manuel utilisateur

Point Mobile

Point Mobile PM60 Manuel utilisateur

Blackbe;rry

Blackbe;rry Q10 Manuel utilisateur

Blackbe;rry

Blackbe;rry Bold 9900 Manuel utilisateur

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manuel utilisateur

LG

LG LM-K420EMW Manuel utilisateur

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manuel utilisateur

LG

LG Thrive Manuel utilisateur

1

ZTE MF83M

Quick Guide

2

LEGAL INFORMATION

Copyright © 2013 ZTE CORPORATION.

All rights reserved.

No part of this publication may be excerpted, reproduced,

translated or utilized in any form or by any means, elec-

tronic or mechanical, including photocopying and micro-

lm, without the prior written permission of ZTE Corpora-

tion.

The manual is published by ZTE Corporation. We reserve

the right to make modications on print errors or update

specications without prior notice.

Version No. : R1.0

Edition Time : 7.2013

3

Getting to Know Your Device

Appearance

The following gure is only for your reference. The actual

product may be different.

1. LED Indicators

2. Power Button

3. WPS Button

4. Micro USB Port

5. (U)SIM Card Slot

6. microSD Card Slot

NOTE:

1. microSD logo is a trademark of SD-3C, LLC.

2. You can hold the Power button and WPS button to

reset the device.

4

Indicators

Indicator Status Description

Network

Red solid

Error status. Not registered

to the mobile network, no

(U)SIM card inserted or no

network service available.

Green solid Registered to the mobile

network.

Green

blinking

Connected to the mobile

network and data is being

transferred.

Wi-Fi

Blue solid Wi-Fi is active.

Blue blinking WPS is active.

LED light off Wi-Fi is off or your device is

in sleep mode.

SMS

Blue solid You have unread messages.

Blue blinking You have new messages.

LED light off No messages.

5

Battery

Red solid/

blinking

The battery is low. Please

charge the battery.

Green

blinking

The battery is being

charged.

Green solid The battery level is middle

or high.

LED light off

Your device is in standby

mode and not being

charged, or the battery is

not inserted.

Connection Scenario

Your device supports two methods to connect to the Inter-

net and supports multi-clients for surng on the Internet at

the same time. The following gure is only for your refer-

ence.

• 3G Mode: Use your (U)SIM card to access the Inter-

net.

6

• Internet Wi-Fi Mode: Your device will connect to

other WLAN device (hotspot device, wireless router,

etc.) via Wi-Fi to access the Internet. The WLAN de-

vice has already connected to the Internet.

NOTE:

The subnets of your device and other WLAN device must

be different.

7

Installing Your Device

1. Slide the back cover and remove it

2. Insert the (U)SIM card.

IMPORTANT: Your device does not support Micro/Nano

or any other nonstandard SIM cards. To avoid device

damage, please do not use them.

8

3. Insert the microSD card if necessary.

4. Insert the battery.

5. Close the back cover.

9

Connecting to Your Device

Via Wi-Fi

1. Power on your device directly. It will take 1~2 minutes

to initialize.

2. Use your normal Wi-Fi application on the client to

search for the available wireless networks.

NOTE: Please set the client to obtain an IP address

automatically referring to the chapter “Configuring your

PC”, and then the client will get an IP address like

“192.168.0.101”.

10

3. Select the SSID of your device, and then click Con-

nect.

NOTE:

Please check the label on your device to get the default

SSID.

4. Input the password, and then click Connect.