ZKTeco Padlock Manuel utilisateur

User Manual

Delete Fingerprints

Low Power Alert and Recharge

Version: 1.1

Date: Jul 2019

Padlock

ZK Building, Wuhe Road, Gangtou, Bantian, Buji Town,

Longgang District, Shenzhen China 518129

Tel: +86 755-89602345

Fax: +86 755-89602394

www.zkteco.com

After unlocking the lock, verify with administrator

ﬁngerprint and keep pressing on the sensor until

the blinking green LED turns to bluish red.

Now move the ﬁnger from the sensor, and then

press again with administrator ﬁngerprint on the

sensor until the blinking red LED turns to green,

which indicates all the ﬁngerprints are deleted.

If the system detects low power, the yellow LED will blink

when you touch the sensor. You can still open the lock for

about 50 times when the yellow LED blinks.

If the battery is totally discharged, you need to link the

lock to a charge pal or other portable power supply

before trying to unlock it. After unlocking, recharge the

lock.

Note: Do not move the ﬁnger from the sensor until the red LED blinks, otherwise the deletion will interrupt.

For charging remove the silicone USB plug, then insert

the USB cable and link it to any PC/tablet or charge pal.

The red LED will be blinking while charging. After about

60 minutes of charging, the green LED will light up, which

indicates the completion of charging.

Factory Default Mode

Verify and Unlock

Note: The maximum number of ﬁngerprints the lock can register is 10, where the ﬁrst two registered

ﬁngerprints belong to the administrator group, and they have the right to register or delete other ﬁngerprints.

Factory settings of all new locks allow any ﬁngerprint to unlock them.

Unlock the lock with any

ﬁngerprint and keep pressing

on the sensor until the green

LED blinks.

Now move the ﬁnger from the sensor

and the blue LED will blink, which

means the lock has entered in

registration mode.

Then press a desired ﬁnger on the

sensor, and move the ﬁnger when

the green LED lights up, then

press the same ﬁnger two more

times until the lock turns oﬀ

automatically, which means the

ﬁngerprint is registered.

Press a registered ﬁnger on the sensor, the green LED lights up if the

veriﬁcation is successful, and then the lock will unlock automatically.

If the red LED lights up, then please press your ﬁnger correctly.

Note: After seven failed veriﬁcations, the lock will turn oﬀ automatically.

After unlocking the lock, verify with

administrator ﬁngerprint and keep

pressing on the sensor until the green

LED blinks.

Now move the ﬁnger from the

sensor and the blue LED will blink,

which means the lock has entered

in registration mode.

Then press a new ﬁnger on the

sensor, and move the ﬁnger

when the green LED lights up,

then press the same ﬁnger two

more times until the lock turns

oﬀ automatically, which means

the ﬁngerprint is registered.

Autres manuels ZKTeco Verrouillage

ZKTeco

ZKTeco ZM100 Manuel utilisateur

ZKTeco

ZKTeco DL30B Manuel utilisateur

ZKTeco

ZKTeco AL30B Manuel utilisateur

ZKTeco

ZKTeco CL10 Manuel utilisateur

ZKTeco

ZKTeco PL10 Series Manuel utilisateur

ZKTeco

ZKTeco DL30B Manuel utilisateur

ZKTeco

ZKTeco L 6800 Manuel utilisateur

ZKTeco

ZKTeco ZM100 Manuel utilisateur

ZKTeco

ZKTeco DL30Z Manuel utilisateur

ZKTeco

ZKTeco AL40 Series Manuel utilisateur

ZKTeco

ZKTeco SBTL9000 Series Manuel utilisateur

ZKTeco

ZKTeco ZL500 Manuel utilisateur

ZKTeco

ZKTeco DL30B Manuel utilisateur

ZKTeco

ZKTeco AL30B Manuel utilisateur

ZKTeco

ZKTeco AL20B Manuel utilisateur

ZKTeco

ZKTeco TL100 Manuel utilisateur

ZKTeco

ZKTeco DL30DB Manuel utilisateur

ZKTeco

ZKTeco PL10 Series Manuel utilisateur

ZKTeco

ZKTeco AL10B Manuel utilisateur

ZKTeco

ZKTeco TL300 Manuel utilisateur

ZKTeco

ZKTeco TL400B Manuel utilisateur

ZKTeco

ZKTeco AL10B Manuel utilisateur

ZKTeco

ZKTeco TL800 Manuel utilisateur

ZKTeco

ZKTeco ML200 Series Manuel utilisateur

Manuels Verrouillage populaires d'autres marques

Magic

Magic 105 Manuel utilisateur

Gantner

Gantner GAT NET.Lock 7020 System Guide rapide

Wittkopp

Wittkopp Insys 7202 Manuel utilisateur

Dorma

Dorma Studio Classic Manuel utilisateur

Securam

Securam ECSL-601 Manuel utilisateur

Sudhaus

Sudhaus 3003 Manuel utilisateur

Safety 1st

Safety 1st 48517 Manuel utilisateur

Pado

Pado FDS-10 Manuel utilisateur

Esco

Esco systeQ Series Manuel utilisateur

COMPX

COMPX National D8951 Manuel utilisateur

secureo

secureo Key Box Manuel utilisateur

Stock Loks

Stock Loks C8713 Manuel utilisateur

COMPX

COMPX 1T-058 Manuel du propriétaire

Auslock

Auslock T11 Manuel utilisateur

ELCOM

ELCOM 7205 Manuel utilisateur

Stealth SAFES

Stealth SAFES ShadowVault Manuel utilisateur

Knox

Knox KeySecure 5 Manuel utilisateur

Kwikset

Kwikset 48334/01 Manuel utilisateur