ZKTeco BG1000 Series Manuel utilisateur

BG1000 Series Barrier Gate (APP Version) User Manual

Thank you for choosing our product. Please read the instructions carefully

before operation. Follow these instructions to ensure that the product is

functioning properly. The images shown in this manual are for illustrative

purposes only.

For further details, please visit our Company’s website

www.zkteco.com.

BG1000 Series Barrier Gate (APP Version) User Manual

Without the prior written consent of ZKTeco, no portion of this manual can be copied or

forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries

(hereinafter the "Company" or "ZKTeco").

Trademark

is a registered trademark of ZKTeco. Other trademarks involved in this manual are

owned by their respective owners.

Disclaimer

This manual contains information on the operation and maintenance of the ZKTeco equipment.

The copyright in all the documents, drawings, etc. in relation to the ZKTeco supplied

equipment vests in and is the property of ZKTeco. The contents hereof should not be used or

shared by the receiver with any third party without the express written permission of ZKTeco.

The contents of this manual must be read as a whole before starting the operation and

maintenance of the supplied equipment. If any of the content(s) of the manual seems unclear

or incomplete, please contact ZKTeco before starting the operation and maintenance of the

said equipment.

It is an essential pre-requisite for the satisfactory operation and maintenance that the operating

and maintenance personnel are fully familiar with the design and that the said personnel have

received thorough training in operating and maintaining the machine/unit/equipment. It is

further essential for the safe operation of the machine/unit/equipment that personnel has read,

understood and followed the safety instructions contained in the manual.

In case of any conflict between terms and conditions of this manual and the contract

specifications, drawings, instruction sheets or any other contract-related documents, the

contract conditions/documents shall prevail. The contract specific conditions/documents shall

apply in priority.

ZKTeco offers no warranty, guarantee or representation regarding the completeness of any

information contained in this manual or any of the amendments made thereto. ZKTeco does

not extend the warranty of any kind, including, without limitation, any warranty of design,

merchantability or fitness for a particular purpose.

ZKTeco does not assume responsibility for any errors or omissions in the information or

documents which are referenced by or linked to this manual. The entire risk as to the results

and performance obtained from using the information is assumed by the user.

BG1000 Series Barrier Gate (APP Version) User Manual

ZKTeco in no event shall be liable to the user or any third party for any incidental,

consequential, indirect, special, or exemplary damages, including, without limitation, loss of

business, loss of profits, business interruption, loss of business information or any pecuniary

loss, arising out of, in connection with, or relating to the use of the information contained in or

referenced by this manual, even if ZKTeco has been advised of the possibility of such damages.

This manual and the information contained therein may include technical, other inaccuracies or

typographical errors. ZKTeco periodically changes the information herein which will be

incorporated into new additions/amendments to the manual. ZKTeco reserves the right to add,

delete, amend or modify the information contained in the manual from time to time in the

form of circulars, letters, notes, etc. for better operation and safety of the

machine/unit/equipment. The said additions or amendments are meant for improvement

/better operations of the machine/unit/equipment and such amendments shall not give any

right to claim any compensation or damages under any circumstances.

ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment malfunctions

due to any non-compliance of the instructions contained in this manual (ii) in case of operation

of the machine/unit/equipment beyond the rate limits (iii) in case of operation of the machine

and equipment in conditions different from the prescribed conditions of the manual.

The product will be updated from time to time without prior notice. The latest operation

procedures and relevant documents are available on http://www.zkteco.com.

If there is any issue related to the product, please contact us.

ZKTeco Headquarters

Address ZKTeco Industrial Park, No. 32, Industrial Road,

Tangxia Town, Dongguan, China.

Phone +86 769 - 82109991

Fax +86 755 - 89602394

For business-related queries, please write to us at [email protected].

To know more about our global branches, visit www.zkteco.com.

BG1000 Series Barrier Gate (APP Version) User Manual

About the Company

ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial,

Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-

range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate

Recognition (LPR) gate controllers and Consumer products including battery-operated

fingerprint and face-reader Door Locks. Our security solutions are multi-lingual and localized in

over 18 different languages. At the ZKTeco state-of-the-art 700,000 square foot ISO9001-

certified manufacturing facility, we control manufacturing, product design, component

assembly, and logistics/shipping, all under one roof.

The founders of ZKTeco have been determined for independent research and development of

biometric verification procedures and the productization of biometric verification SDK, which

was initially widely applied in PC security and identity authentication fields. With the

continuous enhancement of the development and plenty of market applications, the team has

gradually constructed an identity authentication ecosystem and smart security ecosystem,

which are based on biometric verification techniques. With years of experience in the

industrialization of biometric verifications, ZKTeco was officially established in 2007 and now

has been one of the globally leading enterprises in the biometric verification industry owning

various patents and being selected as the National High-tech Enterprise for 6 consecutive years.

Its products are protected by intellectual property rights.

About the Manual

This manual introduces the operations of BG1000 Series Barrier Gate (APP Version).

All figures displayed are for illustration purposes only. Figures in this manual may not be exactly

consistent with the actual products.

BG1000 Series Barrier Gate (APP Version) User Manual

Document Conventions

Conventions used in this manual are listed below:

GUI Conventions

For Software

Convention

Description

Bold font

Used to identify software interface names e.g., OK,Confirm,Cancel.

Multi-level menus are separated by these brackets. For example, File >

Create > Folder.

For Device

Convention

Description

< >

Button or key names for devices. For example, press <OK>.

[ ]

Window names, menu items, data table, and field names are inside

square brackets. For example, pop up the [New User] window.

Multi-level menus are separated by forwarding slashes. For example,

[File/Create/Folder].

Symbols

Convention

Description

This represents a note that needs to pay more attention to.

The general information which helps in performing the operations

faster.

The information which is significant.

Care taken to avoid danger or mistakes.

The statement or event that warns of something or that serves as a

cautionary example.

BG1000 Series Barrier Gate (APP Version) User Manual

Table of Contents

1 OVERVIEW................................................................................................................................. 7

2 FEATURES AND FUNCTIONALITIES........................................................................................ 7

3 APPEARANCE AND DIMENSIONS........................................................................................... 8

4 SPECIFICATIONS....................................................................................................................... 8

5 INSTALLATION PROCEDURE................................................................................................... 9

INSTALLATION PRECAUTIONS..................................................................................................9

CABLE EMBEDDING................................................................................................................9

BOOM ARM INSTALLATION...................................................................................................11

5.3.1 BOOM ARM INSTALLATION PROCEDURE................................................................................. 11

6 LEFT AND RIGHT DIRECTIONS.............................................................................................. 12

7 MAINBOARD WIRING INSTRUCTIONS................................................................................. 12

WIRE CONNECTION OF THE NEW MAINBOARD....................................................................... 13

CONNECTION WITH LPR CAMERA......................................................................................... 13

CONNECTION WITH UHF CONTROLLER..................................................................................14

CONNECTION WITH LOOP DETECTOR.....................................................................................14

CONNECTION WITH VR10 RADAR SENSOR.............................................................................15

CONNECTION WITH INFRARED/PHOTOCELL DETECTOR............................................................ 16

CONNECTION WITH DEVICE’SWI-FI...................................................................................... 17

8 FUNCTIONAL PARAMETER SETTINGS..................................................................................19

MAINBOARD PARAMETER SETTINGS...................................................................................... 19

8.1.1 OPERATING PROCEDURE......................................................................................................19

PARAMETER SETTINGS DESCRIPTION..................................................................................... 20

ERROR CODE.......................................................................................................................24

REMOTE CONTROL PAIRING AND UNPAIRING......................................................................... 25

8.4.1 PAIRING........................................................................................................................... 25

8.4.2 UNPAIRING....................................................................................................................... 25

SET DELAY FOR AUTOMATIC CLOSING AFTER OPENING THE BOOM ARM.................................. 25

9 BOOM ARM ADJUSTMENTS.................................................................................................. 26

DIMENSIONS....................................................................................................................... 26

HORIZONTAL AND VERTICAL ANGLE ADJUSTMENT OF BOOM ARM (MECHANICAL ADJUSTMENT)

BG1000 Series Barrier Gate (APP Version) User Manual

DIRECTION INTERCHANGE OF THE BOOM ARM....................................................................... 28

SPRING ADJUSTMENT.......................................................................................................... 29

10 PRODUCT PACKING LIST.................................................................................................. 29

11 TROUBLESHOOTING......................................................................................................... 30

12 SAFETY PRECAUTIONS..................................................................................................... 31

13 TRANSPORTATION AND STORAGE................................................................................. 31

14 WARRANTY.........................................................................................................................31

BG1000 Series Barrier Gate (APP Version) User Manual

1Overview

BG1000 series barrier gate is a high-performance barrier gate that adopts ZKTeco’s

interactive LED chassis design. It controls the flow of the traffic in and out of the premises

providing maximum security at a low cost. It adopts ARM7 embedded system control core,

brushless DC motor, and SCM421 material gear transmission structure to offer maximum

efficiency.

It has the advantages of high speed, efficiency, stable quality, user-friendly customization,

comprehensive performance, and so on. It can be used in real-time application areas such

as offices, hospitals, public places, residential areas to ease traffic issues.

2Features and Functionalities

The operating speed is 1.5s, and the speed can be adjusted according to different

boom arm lengths.

Reversible left and right directions.

The transmission mechanism is simple, compact, and easy to install on-site.

Interactive and stylish chassis LED design.

Equipped with digital control monitoring, thus supports delay in automatic close,

automatic test, rise/fall output status display.

Supports automatic power-off, manual rise of the boom arm, anti-smash, and fire

linkage functions.

The angle of rise/fall of the arm can be adjusted, and the digital encoder is adopted to

limit the position automatically, thus replacing the traditional limiting procedure. The

position control is accurate.

24V backup battery can be used to ensure the normal operation of the barrier when

power is off.

The chassis is made of a 2.0mm metal sheet through an electrophoretic and powder

spraying process.

The boom will bounce back when it is blocked.

BG1000 Series Barrier Gate (APP Version) User Manual

3Appearance and Dimensions

4Specifications

Model

BG1030L/R

BG1045L/R

BG1060L/R

BG1045L/

R-LED

BG1145L/

R-90

Operating Speed

1.5s

2.5s

Boom Arm Length

4.5m

Boom Arm Type

Straight

boom

Telescopic boom

Straight

boom with

LED

Folding

boom

Chassis Dimension

(W*L*H)

350*300*1020 (mm)

Motor Type

DC 24V brushless motor

Output Power

120W

Rated Current

Power Supply

AC 220V, 50Hz / AC 110V, 60Hz

Operating

Temperature

-35°C to 70°C

Operating Humidity

<90%

Motor MCBF

3 million times

Remote Control

Distance

≤30m

Chassis Weight

45kg

BG1000 Series Barrier Gate (APP Version) User Manual

5Installation Procedure

Installation Precautions

1. Install the parking barrier on a flattened ground. A cement foundation is required

before installation if the ground is not solid and flat.

2. It is possible to reduce the length of the boom arm, but it cannot be increased. After

the boom arm has been cut, it is important to set the spring balance again to achieve

a new balance. The bottom of the spring contains two plastic nuts designed to adjust

the new balance.

3. When powered on, do not change the wire connection inside.

4. Connect the GND to the cabinet for ensured protection.

Cable Embedding

1. A φ25 protective sleeve and a cable are required.

2. The route cables must pass through the protective sleeves.

3. Use a tool to open the cable tray on the ground.

Minimum

depth:100mm

Autres manuels pour BG1000 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ZKTeco Système de contrôle

ZKTeco

ZKTeco BG2000 Series Manuel utilisateur

ZKTeco

ZKTeco PB4060 Manuel utilisateur

ZKTeco

ZKTeco QR500 Mode d'emploi

ZKTeco

ZKTeco InBio460 Mode d’emploi

ZKTeco

ZKTeco SBTL5000 series Manuel utilisateur

ZKTeco

ZKTeco CMP-100A Manuel utilisateur

ZKTeco

ZKTeco CMP-200 Series Manuel utilisateur

ZKTeco

ZKTeco X7 Manuel utilisateur

Manuels Système de contrôle populaires d'autres marques

Pentair Pool Products

Pentair Pool Products Compool Manuel utilisateur

ComfortNET

ComfortNET CTK04 Manuel utilisateur

Fireye

Fireye InSight II 95DSS3 Manuel utilisateur

CAME

CAME G3000 Manuel utilisateur

Idemia

Idemia MorphoAccess VP MD Manuel utilisateur

Axis

Axis P1445-LE-3 Manuel utilisateur

HEIDENHAIN

HEIDENHAIN TNC 150 B Manuel utilisateur

CNC-Step

CNC-Step High-Z T-Series Manuel utilisateur

Doosan

Doosan DVF Series Manuel utilisateur

Honeywell

Honeywell KAP 140 Manuel utilisateur

Honeywell

Honeywell vk41 series Manuel utilisateur

AirBench

AirBench FPW Guide d'installation

Cypress

Cypress HHR-3160 Manuel utilisateur

CAME

CAME GLT40AOS Manuel utilisateur

Zonex

Zonex GEN II -VVT Guide de l'utilisateur

Altronics

Altronics K 9650 Manuel utilisateur

micro-trak

micro-trak RoadMaster Manuel utilisateur

micro-trak

micro-trak Calc-An-Acre II Manuel utilisateur