ZKTeco SBTL2000 Manuel utilisateur
Swing Barrier Instructions
Applicable Models: SBTL 2000 / 3000
Version: 1.0 Date: Mar. 2021
pplicable Models: SBTL 2000 / 3000
Contents
Chapter 1 Product Introduction...................................................................................................... 2
1.1 Model number and access control..................................................................................2
1.2 Chassis and dimensions.................................................................................................. 2
1.3 Mechanical system of the swing barrier........................................................................ 3
1.4 Electronic control system................................................................................................. 3
1.5 The working principle of swing barrier........................................................................... 4
1.6 System composition of the product................................................................................ 4
Chapter 2 The installation of the product..................................................................................... 6
2.1 Installation notes................................................................................................................6
2.2 Installation position of the swing barrier........................................................................ 6
2.3 Cables Installation and Fixation...................................................................................... 7
Chapter 3 Menu Operation............................................................................................................. 8
3.1 Function Introduction..............................................................................................8
Chapter 4 Common failure analysis............................................................................................14
Chapter 5 Product maintenance..................................................................................................15
5.1 Chassis maintenance..................................................................................................... 15
5.2 Movement maintenance.................................................................................................15
5.3 Power maintenance........................................................................................................ 15
3.2 Menu Introduction..................................................................................................9
Chapter 1 Product Introduction
1.1 Model number and access control
Access
Model
NO
C3-200 with two
KR100E reader
inBIO260 with two FR1200/ID
reader
SBTL2000
√
SBTL2011
√
SBTL2022
√
SBTL3000
√
SBTL3011
√
SBTL3022
√
1.2 Chassis and dimensions
SBTL2000/3000 series, with stainless steel housing, provide simple and beautiful design with
anti-corrosion. It is provide orderly and civilized passage to people while eliminating illegal personnel
access. In case of emergency, it ensures timely evacuation channel smoothly and convenient personnel.
SBTL2000’s appearance and dimensions are as shown in figure 1-2A：
SBTL3000’s appearance and dimensions are as shown in figure 1-2B：
Figure1-2A
Figure1-2B
1.3 Mechanical system of the swing barrier
The mechanical system of a swing barrier turnstile includes the chassis and the core component. The
chassis is a carrier where the direction indicator, the read-write device, the Infrared sensor, and the door
locks is installed. The core component mainly consists of the electric motor, the frame, the belt, and the
swing boom.
1.4 Electronic control system
The electronic control system of a swing barrier turnstile is mainly composed of the reader, master control
panel, access controller, infrared sensor, direction indicator, alarm, and the transformer.
Reader：The reader reads the data onto the card and sends it to the controller.
Master control panel: The master control panel is the system’s control center that receives signals from
the reader and the photoelectric switch, performs logical judgment and processing of these signals, also
sends executive commands to the direction indicator, electric motor and alarm.
Infrared sensor: It detects the position of a pedestrian and plays the role of safety protection.
Direction indicator: This indicator displays the current status of the sign of the channel, and directs the
pedestrian to pass through the channel in a safe and orderly manner.
Alarm: The alarm gives an alarm message if the system detects any unauthorized entry to the channel.
1.5 The working principle of swing barrier
1.5.1 After powered on, the system performs self-check. If no failure is detected, the machine starts to
operate normally. If a failure is detected, the system displays related messages on the LCD Display
screen so that the user can have a quick knowledge of and solve the problem.
1.5.2 When the reader detects a valid card, the buzzer will give a nice audible prompt to the pedestrian,
indicating that the card is being read successfully. And then, the reader sends signals to the access
controller to request permission to pass through the passage.The access controller will send the signal to
the master control panel.
1.5.3 After receiving the signal from the access controller, the master control panel sends valid control
signals to the direction indicator and the electric motor. And the direction arrow turns green.
1.5.4 Pedestrians pass through the channel according to the direction indicator signs, infrared sensors
detect the pedestrians pass through the whole process, and continue to send signal to the master control
board until the pedestrian has been completely through the channel.
1.5.5 If the pedestrian enters the channel but forgets to have the card read by the reader, or the card held
by the pedestrian is invalid, that the system will stop the pedestrian , and give an audible alarm until the
pedestrian retreats from the channel. The pedestrian can pass through the channel only after a valid card
is read by the card reader.
1.6 System composition of the product
The single-channel management system is composed of two single-core swing barrier turnstiles.The
mufti-channel management system is composed of two single-core barriers and multiple dual-core
barriers.
1.6.1 Working modes of the system
To meet the requirements for use for different places, this system provides multiple working modes for the
user.Including fire protection mode, normal working mode, testing mode,. The parameters can be set by
using three built-in keypads ("ENT", "UP", and "DOWN") on the master control panel.
Option 16 in the menu is configurable using the values 0, 1, and 2.
If 0 is used, the system is being under the normal mode and does not detect the fire protection signals.
If the detected fire protection signal is a pulse signal, the value is set to 1. Once this pulse signal is
detected, the system will automatically open the barriers and stop actions until it is powered off to restart.
If the detected fire protection signal is a continuous level signal, the value is set to 2. Once this continuous
high-level signal is detected, the system will automatically open the barriers and then wait until this
high-level signal disappears. After this signal disappears, the system automatically closes the barriers and
falls into the normal working mode.
Option 15 can be used to set the self-testing mode of the system. If the value is set to 1, the system will
enter the automatic testing mode. Under this mode, the system automatically figures out the parameters
such as the inertia of the swing arm.
1.7 Product related parameters
Dimension(mm)
SBTL2000 : L=1200, W=280, H=1000
SBTL3000 : L=1500, W=260, H=1000
Communication Interface
RS485
Input voltage
AC100-120V/200-240V,50-60Hz
Input control signal
Switching
signal
output voltage
DC 24V
Time of opening/closing
0.6S(adju
stable)
Relative
humidity
5%-10%
temperature
-28℃-60
℃
Pass speed
RFID：Maximum 42/minute
Fingerprint：Maximum 35/minute
Face：Maximum 11/minute
Vein：Maximum 23/minute
Infrared sensor
6
Working
environment
indoor/Outdoor
Chapter 2 The installation of the product
2.1 Installation notes
2.1.1 It is recommended that the swing barrier turnstile should be installed on a cement platform with
50mm to 100mm in height.
2.1.2 It is recommended that the swing barrier turnstile should not be used in corrosive environment.
2.1.3 Make sure the protective earth wire of the system is reliably connected to avoid personal injuries or
other accidents.
2.1.4 After installation, check whether connection is reliable at the connecting points of the protective
earth wire, at the connector assemblies and wiring points of the circuits, as well as at each movable part
of the swing barrier turnstile. Any loose nuts, screws and other fasteners should be tightened in time to
avoid swing barrier turnstile failures caused by long-time operations.
2.2 Installation position of the swing barrier
The installation position depends on the size of the swing barrier.If the swing barrier turnstile is installed
near a wall, a distance from100mm between the swing barrier turnstile and the wall needs to be reserved
for ease of opening the top cover of the machine to perform maintenance and adjustment. The master
and slave of a SBTL2000 swing barrier turnstile may either form a channel, or form two channels with a
SBTL2200 swing barrier turnstile,as shown in figure 2-2A;
Figure2-2A SBTL2000 Single channel and dual channel
The master and slave of a SBTL3000 swing barrier turnstile may either form a channel, or form two
channels with a SBTL3200 swing barrier turnstile,as shown in figure 2-2B;
Figure2-2B SBTL3000 Single channel and dual channel
2.3 Cables Installation and Fixation
For the outlets of the concealed cables, please refer to the drawing showing the mounting holes.The input
voltage for this swing barrier turnstile is AC100-120V/200-240V and its master and slave are connected
by a 6-core cable. When installing this swing barrier turnstile, the user only needs to connect it to the
corresponding ports.Note that the PVC conduits are buried 100mm below the ground, with the height of
the exposed part not exceeding 100mm. In addition, the conduit outlet is bent back to prevent ingress of
water into the conduit.
SBTL2000 installation holes and cabling positions as shown in Figure 2-3A.
SBTL3000 installation holes and cabling positions as shownv in Figure 2-3B.
Figure 2-3A
Figure 2-3B
Mark out the screw hole centers of the stand, and the edge of the chassis bases on the ground according
to the sizes as shown on the figure 2-3A. Use a hammer drill to perforate M12 screw holes and then install
the screws. Place the swing barrier turnstile according to the sizes and positions as shown in the figure
before installation and fixation. Connect the online cables and perform the power-on test. If the test is OK,
tighten the screws.It is recommended that a warning line was marked out on the ground after the machine
is installed, so as to prompt the pedestrian to stand behind the warning line when swiping the card. As
shown in Figure 2-3C:
Figure 2-3C
Chapter 3 Menu Operation
3.1 Function Introduction
1.After powered on, the LCD screen on the control board will display the default state showing the current
working mode.
2.There are 4 buttons on the control board: UP, DOWN, ENT, and ESC, show as Figure 3-1:
UP: to move upwards or increase the value.
DOWN: to move downwards or decrease the value.
ENT: to enter a menu setting item or confirm the current modified value.
ESC: to return to the previous menu or cancel the current operation.
figure 3.1
3.Operation and instruction of menu
Press the ENT button and enter the password input interface. The default password is: UP, UP,
DOWN, DOWN, DOWN, DOWN. You may press the ESC button to erase the last input. After entering
the menu, press UP or DOWN to choose a menu item, then press ENT to enter the interface and
adjust such function or value.
There are four keys on the control panel, including "UP", "DOWN", "ENT", and "ESC". Press “ENT” to
modify settings, press "UP" and "DOWN" button to select a function, and press ”ESC” to exit.
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels ZKTeco Barrière automatique
ZKTeco
ZKTeco FBL200 Manuel utilisateur
ZKTeco
ZKTeco BG1000 Series Manuel utilisateur
ZKTeco
ZKTeco PB3000 Series Manuel utilisateur
ZKTeco
ZKTeco BGM1000 Series Manuel utilisateur
ZKTeco
ZKTeco CMP-200 Series Manuel utilisateur
ZKTeco
ZKTeco ProEntrance Series Manuel utilisateur
ZKTeco
ZKTeco ProBG3000 Series Manuel utilisateur
ZKTeco
ZKTeco CMP-200 Series Manuel utilisateur
ZKTeco
ZKTeco SBTL300 Series Manuel utilisateur
ZKTeco
ZKTeco LB330 Manuel utilisateur
