Zippity ZP19052 Manuel utilisateur

www.zippity-outdoor.com

ASSEMBLY

INSTRUCTIONS

LIBERTY LATTICE AC

SCREEN KIT

45 MIN approximate assembly

time for 3 panels

6935 Reames Rd. Ste. K. Charlotte, NC 28216

support@zippity-outdoor.com

704-892-5222 / 877-234-6196

zippity-outdoor.com

2www.zippity-outdoor.com

GENERAL INFORMATION

IMPORTANT

•Please read through before starting assembly.

• Important: Check the inside of the larger pieces in your box for other materials packed inside.

• When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching.

• We recommend an area approx 5’x 8’ for unobstructed assembling.

• You should not need to use excessive force when assembling components.

MISSING OR DAMAGED PARTS?

CALL US FIRST SO WE CAN HELP YOU RIGHT AWAY!

Although great care has been taken to ensure proper packaging and handling of this product, occasionally problems occur.

If you discover any missing, damaged or defective parts, please contact our customer service department.

EMAIL: support@zippity-outdoor.com

PHONE: 704-892-5222 / 877-234-6196

Customer service agents are available to take calls weekdays from 8am-5pm EST.

To help you quickly and accurately, please have reference item number ZP19052 and the specic part name which can be

found on the next page. It is helpful if you can provide the batch lot which is a stamped number on the end of the box.

NEED ASSEMBLY HELP?

If you are having problems with the assembly or installation of this product, we are happy to assist you with the process, so

please give us a call at 704-892-5222 / 877-234-6196.

NEED TO RETURN?

If for some reason you need to return this product, please allow us to help resolve your issues rst. If you still decide to

return the product, you will need to intitate the return from the company you originally purchased from.

www.zippity-outdoor.com

STEP 1: LAY OUT MATERIALS

LIBERTY LATTICE AC SCREEN KIT 3 PANEL

TOOLS YOU WILL NEED

Cordless Drill

Tape Measure

B C

E F

Post Caps (6)

Horizontal Bottom Rail - Front (1)

1 ½” x 1 ½” x 36”

Horizontal Top Rail - Front (1)

1 ½” x 1 ½” x 36”

Horizontal Top Rail - Side (2)

1 ½” x 1 ½” x 36”

Horizontal Bottom Rail - Side (2)

1 ½” x 1 ½” x 36”

Horizontal

Picket (27) -

1 ¼” x ¼” x 33 ¼”

(marked with sticker

labeled “1”)

Vertical Picket (24) -

1 ¼” x ¼” x 35 ¾”

(marked with sticker

labeled “2”)

Posts (6) -

” x 1 ½” x 42”

End Caps (12)

(6 are installed,

6 are loose) ¾” Self-Augering

Stainless Steel Screw (24)

(for panel assembly)

4” Self-Tapping

Stainless Steel Screw (8)

(for connecting panels)

4www.zippity-outdoor.com

STEP 2: ASSEMBLE THE HORIZONTAL PICKETS

STEP 2.1 Identify the horizontal top rail - front (F) and the horizontal bottom rail - front (D) as shown below. Pressure t two

loose rail end caps (B) into the ends of each rail. Set these rails aside for now.

Top rail will be marked with two pre-

drilled holes on the top of the rail.

Front rails have no pre-drilled holes at these locations.

Side rails will have two pre-drilled holes on each end.

STEP 2.2 STEP 2.3

Take two posts (G) and position them so

the routed holes face in towards each

other as shown.

1. Insert nine horizontal pickets (H) into the

routed holes in one of the posts.

2. Starting at one end of the opposite post,

guide the pickets into the routed holes in the

post.

NOTE: Identify the top of the screen by nding

the side of the post with pre-drilled hole 2 ¾"

from the end of the post.

2.75 in

4.75 in

www.zippity-outdoor.com

STEP 3: ATTACH THE VERTICAL PICKETS

STEP 3.2

STEP 3.1

Insert the eight vertical pickets (I) into the routed picket holes in the rail.

1. Take one of the horizontal bottom rails - front (D) and slide it up over the posts as illustrated. Ensure the routed

picket holes in the rail are facing up.

2. Align the pre-drilled holes in the posts and the rail.

3. Drive a ¾” screw (J) in each of the pre-drilled holes on the front and back of the rail (4 total).

NOTE: Vertical pickets will

have a sticker labeled "2".

Align

6www.zippity-outdoor.com

STEP 4: COMPLETE THE PANELS

STEP 4.1 1. Slide the horizontal top rail - front (F) over the posts ensuring the picket holes in the top rail are facing down.

2. Guide the pickets into the top rail and slide it down until the pre-drilled holes in the rail align with the holes in the

post.

3. Drive (4) ¾” screws into the aligned pre-drilled holes.

STEP 4.2 Repeat Steps 2-4 to create the other two screen panels. The other two panels will use side horizontal rails that

have extra holes at the ends.

Front panel has no

extra pre-drilled holes

Align

www.zippity-outdoor.com

STEP 5: CONNECT THE PANELS

STEP 6: INSERT THE POST CAPS

STEP 5.1

STEP 6.1

1. Take one of the two assembled side panels and place it at a right angle to the front panel as shown.

2. Drive (4) 4” screws (K) into the pre-drilled holes in the top and bottom rail.

3. Repeat this process on the other side with the third screen as shown below.

Insert (6) post caps (A) over the top of the posts to complete the screen.

NOTE: Ensure the screws are driven in straight.

Front Panel

8www.zippity-outdoor.com

OPTIONAL STEP 7: PURCHASE ROOF ACCESSORIES

OPTIONAL TABLETOP KIT FOR LIBERTY

LATTICE (ZP19053)

OPTIONAL WINTER COVER KIT

FOR LIBERTY LATTICE (ZP19054)

- Provides airow to allow for year round usage.

- Useful for holding small trays, plants, etc.

- Only to be used in winter months when

condenser is not running.

- Protects your condenser from winter elements.

6935 Reames Rd. Ste. K. Charlotte, NC 28216

support@zippity-outdoor.com

704-892-5222 / 877-234-6196

zippity-outdoor.com

These products can be found at www.zippity-outdoor.com.

Follow the instructions included with the optional accessory kits to assemble and install.

Autres manuels pour ZP19052

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Zippity Clôtures et portails

Zippity

Zippity ZP19022 Manuel utilisateur

Zippity

Zippity NEWPORT VINYL PICKET FENCE Manuel utilisateur

Zippity

Zippity ZP19063 Manuel utilisateur

Zippity

Zippity MAUI Manuel utilisateur

Zippity

Zippity LIBERTY LATTICE ZP19053 Manuel utilisateur

Zippity

Zippity ZP19041 Manuel utilisateur

Zippity

Zippity WILMINGTON ZP19008 Manuel utilisateur

Zippity

Zippity BELLA Manuel utilisateur

Zippity

Zippity Huntersville ZP19036 Manuel utilisateur

Zippity

Zippity Urban Escape Vinyl Fence Manuel utilisateur

Zippity

Zippity ZP19055 Manuel utilisateur

Zippity

Zippity BURBANK Manuel utilisateur

Zippity

Zippity Manchester Vinyl Picket Gate with Posts Instructions de fonctionnement

Zippity

Zippity ZP19001 Manuel utilisateur

Zippity

Zippity ROGER RABBIT VINYL GARDEN FENCE KIT 3 PACK Manuel utilisateur

Zippity

Zippity ZP19019 Manuel utilisateur

Zippity

Zippity Baskenridge Manuel utilisateur

Zippity

Zippity ZP19002 Manuel utilisateur

Zippity

Zippity ALL AMERICAN VINLY PICKET GATE ZP19043 Manuel utilisateur

Zippity

Zippity Madison Vinyl Picket Fence Kit 2-Pack Manuel utilisateur

Zippity

Zippity LIBERTY LATTICE ZP19054 Manuel utilisateur

Zippity

Zippity ALL AMERICAN PRIVACY SCREEN Manuel utilisateur

Zippity

Zippity Madison Gate Kit w/ Fence Wings Manuel utilisateur

Zippity

Zippity BURBANK ZP19071 Manuel utilisateur

Manuels Clôtures et portails populaires d'autres marques

Casanoov

Casanoov KIT-000045 Manuel utilisateur

Heras

Heras SHB21 Manuel utilisateur

Casanoov

Casanoov VOGEL 350C140 Manuel utilisateur

DITEC

DITEC Silver 1B/40B Manuel

Casanoov

Casanoov EIGER 350C140 Manuel utilisateur

Olli

Olli Lister WZG 180B Manuel utilisateur

WamBam

WamBam BL19042 Manuel utilisateur

Wisniowski

Wisniowski MakroPro 100 Manuel utilisateur

Roger Technology

Roger Technology LT338 Manuel utilisateur

CAI

CAI SG-60-PCY Manuel utilisateur

Hahn

Hahn hanit Mode d'emploi

Oxgard

Oxgard K-14 Manuel utilisateur

patura

patura P4500 Manuel utilisateur

Betafence

Betafence HoriZen Prime Manuel utilisateur

VIEWRAIL

VIEWRAIL Vedera Manuel utilisateur

Alvarado

Alvarado CSG Manuel utilisateur

RTL

RTL INSTABOOM LITE Manuel utilisateur

IKC

IKC HW00571 Manuel utilisateur