ZIGGITY SYSTEMS D-Max Manuel utilisateur
Note: When printing select “t” to page or margin option. ©2020 Ziggity Systems, Inc. PN 200520 Revision 2020-09-11
Installation Manual:
D-Max & T-Max System
© 2020 Ziggity Systems, Inc.
ZIGGITY SYSTEMS, INC.
STANDARD WARRANTY
Ziggity Systems, Inc. (“Ziggity”) warrants to the original retail purchaser (“Purchaser”) of any Ziggity product (“Product”) that for one
(1) year from the date of original retail purchase the Product will be free from defects in materials and workmanship that are material
in nature. The sole remedy available to Purchaser in the event of such a defect will be the repair or replacement (at Ziggity’s sole
option) of the materially defective Product, excluding labor. Purchaser will be responsible for the expense of shipping the defective
Product to Ziggity and, upon Ziggity’s approval of the warranty claim, Ziggity will be responsible for the expense of shipping the
repaired or replaced Product to Purchaser. Any Product or Product replacement parts provided by Ziggity under this warranty are
only warranted for the remainder of the warranty period for the original Product. Any Product or Product replacement part replaced
by Ziggity under this warranty becomes the property of Ziggity.
This warranty excludes liability for defects in or damage to the Product (both internal and external) caused, directly or
indirectly, by misuse, neglect, negligence, alteration, accident, excessive mineral or chemical contact, corrosive chemical
use, minerals or sediment in the water, poor quality water, acts of nature or failure to: (A) follow Ziggity’s guidelines and
recommendations for the Product, (B) follow installation and operating instructions for the Product, (C) use potable and
ltered water in and with the Product, or (D) properly maintain the Product. Furthermore, this warranty does not extend to
any item that is manufactured by others, including without limitation items such as: galvanized support pipe, water lters,
water meters, sight gauges and proportioners. These items are warranted separately by the original manufacturer, if at all.
Ziggity makes no other representations or warranties of any kind except as expressly stated in this warranty. Ziggity
disclaims any and all implied warranties including the warranty of merchantability and the warranty of tness for a
particular purpose. To the fullest extent permitted by applicable law, Ziggity shall not be liable to Purchaser for any
consequential, incidental, exemplary, punitive, special, or indirect damages, and Ziggity shall not be liable for any
damages that are based on negligence, breach of warranty, or strict liability. Ziggity’s liability under this warranty shall
in no event exceed the purchase price paid by Purchaser for the defective Product. Some states do not allow exclusion
or limitation of damages to the full extent described above, so the above exclusions and limitations may not apply fully
to you.
Ziggity may from time to time, through its issuance of formal Information Update documents, provide for supplemental warranty
coverage in addition to this standard warranty for certain products, or may provide for deviations or exclusions from this standard
warranty for certain products. If any such supplemental, deviation, or exclusion Information Updates apply to your Product, you will
be provided with a copy of such Information Updates at the time of your original retail purchase and the standard warranty provided
for above will be deemed modied accordingly.
No person, including any dealer, distributor, agent, or other representative of Ziggity, is authorized to make any
representation or warranty concerning the Product other than as specically contained in this standard warranty and
any Information Update from Ziggity providing for any supplemental warranty coverage or deviation or exclusion from
warranty coverage. Ziggity reserves the right to change Product models, make changes to the Product and Product
specications, at any time and without notice or obligation to Purchaser.
ZIGGITY SYSTEMS, INC.
EXTENDED DRINKER WARRANTY
In addition to its standard warranty, Ziggity provides an extended warranty for certain Drinkers manufactured by Ziggity. All other
provisions of the standard warranty apply to the Extended Drinker Warranty. If any covered Drinker is determined by Ziggity to be
defective in materials or workmanship after the expiration of the one (1) year standard warranty period and prior to ten (10) years
after the date of the original retail purchase, Ziggity will provide a replacement Drinker or Drinker components, as applicable, to the
original retail purchaser at the following discount off of published list/brutto prices:
End User End User
Purchase Date Discount
0 - 36 months 100% (No charge)
37 - 60 months 65%
61 - 120 months 40%
WARNING – AVOID USE WITH OR EXPOSURE TO CORROSIVE PRODUCTS
Do not allow Ziggity products to come into contact with petroleum, phenol or aldehyde based products or any other corrosive
product in general. Contact with such corrosive products is likely to result in damage to or failure of the Ziggity product. Additionally,
aggressive chlorination and/or acidication programs (greater than 1 ppm and/or pH less than 6) will shorten the life of Ziggity
products. Failure to follow this warning will void any otherwise applicable warranty coverage for the Ziggity product when the
product is chemically damaged.
3
The Poultry Watering Specialists
CONTENTS
T-MAX SYSTEM FLOOR APPLICATION INSTALLATION
Support Pipe............................................................................................................................... 4
Regulator.................................................................................................................................... 5
Clip-On Saddle Assembly........................................................................................................... 6
Clip-On Bracket Placement ........................................................................................................ 7
Clip-On Bracket .......................................................................................................................... 7
Pipe Connector........................................................................................................................... 9
End Assembly........................................................................................................................... 10
Clip-On Bracket Screw Placement ........................................................................................... 10
Clip-On Bracket Screw ............................................................................................................. 11
D-Max Drinker .......................................................................................................................... 11
T-Max Drinker Assembly With Cordless Drill and Nutsetter..................................................... 12
T-Max Drinker Assembly And Installation - Hand Assembly .................................................... 13
T-Max to Flex Saddle Reinforcement Assembly ...................................................................... 14
Heavy Duty Anti-Roost ............................................................................................................. 15
PN 2970.................................................................................................................................... 16
PN 2971.................................................................................................................................... 17
Drain Hose................................................................................................................................ 20
OPTIONAL EQUIPMENT
Air Release and Shut-Off Assemblies ...................................................................................... 22
Control Clock / Controller / Solenoid Flush............................................................................... 23
Regulator Ball Valve Lock ........................................................................................................ 24
BEST PRACTICE
D-Max Drinker Disassembly..................................................................................................... 26
D-Max Drinker Assembly.......................................................................................................... 27
T-Max Drinker Disassembly ..................................................................................................... 28
T-Max Drinker Assembly .......................................................................................................... 29
Solenoid Flush Valve Maintenance .......................................................................................... 30
Normal Operation Mode / Flush Mode ..................................................................................... 31
IMPORTANT NOTE: If the oor system has a house slope greater than 15 cm / 6 in and
less than 75 cm / 30 in, please consult the “Installation Manual: Slope Neutralizer Floor
Application” for further instruction.
© 2020 Ziggity Systems, Inc.
4
SUPPORT PIPE
1 2
3 4
5 6
7
3 m / 10 ft max
Raise lines to 121 cm / 48 in
Open
End Loop through
open end
rst
Use #8 / M4.2 self
drilling screw.
Use impact drill to
install.
Note Very Important: When
installing slope neutralizers,
cable clamps must be
installed at all system
hangers in place of sliding
cord or cable adjusters.
© 2020 Ziggity Systems, Inc.
5
REGULATOR
Do Not over tighten.
Torque Setting:
1.7 Nm / 15 in lbs MAX
3
Regulator shown
is for T-Max
systems
5 6
4
Flush
Regulator shown
is for D-Max
systems
Ball
Clamp
NOTE: The tighter coils
towards the bottom
Spring
Riser Tube
Riser Tube Cap
Clamp
Install the riser tube
components onto the regulator.
Be sure to place the ball inside
the tube and that the orientation
of the spring is as shown.
Install the ush unit onto
the regulator as shown.
Be sure to place the hose
washer in to the ush unit
before installation.
Hose Washer
Flush Unit
12
© 2020 Ziggity Systems, Inc.
6
DO NOT OFFSET THE TOOL
TO ONE SIDE. THIS WILL CAUSE
DAMAGE AND PRODUCT TO FAIL
5
PN 3817
Vice-Grip 11R
Use large vice-grip plier clamp
(11R shown) to squeeze the clip
until the second snap is engaged.
Use PN 3817 to squeeze the clip
until the second snap is engaged. DO NOT offset the tool to
one side. This will cause
damage and product to fail.
Center PN 3817 on the
clip-on saddle as
shown.
Center tool on the
clip-on saddle as
shown.
Use PN 3817 or vise-grip plier “11R” to complete this step of the installation.
CLIP-ON SADDLE ASSEMBLY - APPLIES TO 1 in PVC PIPE SYSTEMS ONLY
12
Install the grommet onto the saddle.
Grommet
A
3
Clip-On
Saddle
Water
Pipe
Position clip-on saddle onto water pipe.
A
4
Squeeze clip into its
rst snap position using
ngers as shown.
A
E
E
Saddle: Clip-On
Big Z Flex
Saddle: Clip-On
Big Z Extended
© 2020 Ziggity Systems, Inc.
7
CLIP-ON BRACKET PLACEMENT
6 Saddles
8 Saddles
10 Saddles
12 Saddles
5 Saddles
4 Saddles
3 Saddles
1
CLIP-ON BRACKET
2
Snap bottom clips into
place.
Detail A Detail B
Detail A Detail A Detail ADetail B
All brackets must face
the same direction.
CLIP-ON BRACKET
9 10 Make sure all four corners are snapped into place.
Good Bad
© 2020 Ziggity Systems, Inc.
8
6
5
7 8
PN 3840
PN 3868 SNAP
43
Snap upper side clips into
place. Snap remaining clips
into place.
PN 3840 only required for
T-Max system.
© 2020 Ziggity Systems, Inc.
9
46 mm /1/4 in
Hold Pipe A and the Pipe Connector securely. Pull Pipe B away from the connector approximately 6 mm /
1/4 in using your thumb as a guide. Repeat this process for each pipe connector.
Pipe A Pipe B
Pipe Connector Pipe BPipe A
6 mm - 1/4 in Gap
PIPE CONNECTOR
3
1
2
Pipe Connector
Pipe A
With Pipe A afxed to the support pipe, install the Pipe Connector all the way
against the stop on the inside of the pipe connector.
Pipe A
Pipe Connector
Pipe A
Pipe Connector
Pipe B
Install pipe B all the way against the stop on the inside of the
pipe connector.
Pipe B
With both pipes inserted into the connector and up against the stop, place your thumb on the
edge of the pipe connector as shown.
WARNING: All Ziggity pipes must be installed in a manner shown in order to accommodate pipe expansion and
contractions as a result of temperature changes. Failure to do so will cause pipe snaking and breakage.
Pipe BPipe A
© 2020 Ziggity Systems, Inc.
10
5 6
Do Not install system hangers onto pipe
connectors.
END ASSEMBLY
3
2
Cut plastic pipe
25 mm / 1 in
6 Saddles
8 Saddles
10 Saddles
12 Saddles
5 Saddles
4 Saddles
3 Saddles
CLIP-ON BRACKET SCREW PLACEMENT
Denotes self
tapping screw
placement.
Option 2Option 1
Optional system hanger placement.
PIPE CONNECTOR
Ball
Clamp
NOTE: The tighter coils
towards the bottom
Spring
Riser Tube
Riser Tube Cap
Clamp
Install the riser tube components
onto the end assembly. Be sure
to place the ball inside the tube
and that the orientation of the
spring is as shown.
1
Use a impact drill to install the self-tapping screw
Ensure the support
pipe extends 9.5 mm
/ 3/8 in min. past the
support pipe clamp.
Ce manuel convient aux modèles suivants
1
Table des matières
Manuels Matériel agricole populaires d'autres marques
GSi
GSi PNEG-2314 Manuel utilisateur
Checchi & Magli
Checchi & Magli TEXDRIVE Manuel utilisateur
Amazone
Amazone Cenius 4003-2TX Manuel utilisateur
MASSEY FERGUSON
MASSEY FERGUSON MF 9313S Manuel utilisateur
Cima
Cima BLITZ Instructions d'utilisation et d'entretien
Amazone
Amazone CombiDisc 3000 Instructions d'installation
