Zibro Laser 73 Manuel utilisateur

Laser 73

OPERATING INSTRUCTIONS

KULLANIM KILAVUZU

co_Laser73.qxd 02-11-2006 10:46 Pagina 1

4OPERATING INSTRUCTIONS

Dear Sir, Madam,

Congratulations with your purchase of the Zibro, the number one brand among

movable heaters. You have purchased a first-class quality product, which will

serve you for many years to come. This, of course, provided you use the heater

correctly. Please read these Directions for Use first, to ensure maximum lifetime

for your Zibro.

Your heater comes with a 24-month manufacturer’s warranty on all defects in

material or workmanship.

Wewish you much warmth and comfort with your Zibro.

Yours sincerely,

PVG International B.V.

Customer Service Department

1READ THE DIRECTIONS FOR USE FIRST.

2IN CASE OF ANY DOUBT,CONTACT YOUR ZIBRO DEALER.

man_Laser73_uk.qxd 02-11-2006 10:44 Pagina 3

WHAT YOU NEED TO KNOW IN ADVANCE

THE RIGHT FUEL

Only use Class C1 paraffin fuel in accordance with BS2869: Part 2, or equivalent. Your Zibro heater has been

designed for use with high-quality water-free pure paraffin oil, such as Zibro Extra or Zibro Kristal. Only

fuels of this kind will ensure clean and proper burning. Lower quality fuel may result in:

Eincreased possibility of malfunctioning

Eincomplete burning

Ereduced heater lifetime

Esmoke and/or smells

Edeposits on the grid or mantle

Using the right fuel is therefore essential for safe, efficient, and comfortable use of your heater.

Always refer to your local Zibro dealer for the right fuel for your heater.

TIPS FOR SAFE USE

1Make sure that children are always aware of the presence of a burning heater.

2Position the front of the heater at a distance of minimum 1.5 metres from walls, curtains, and furniture.

3Do not use the heater in dusty rooms. You will not have optimum burning in such rooms. Do not use the

heater in the immediate surrounding of a bath, a shower or a swimming pool.

4Switch off the heater, before you leave or go sleeping. Unplug the heater as well, when you go away for

alonger period of time (e.g. holidays).

5Store and move fuel only in suitable tanks and jerrycans.

6Make sure that the fuel is not exposed to heat or extreme temperature changes. Always store the fuel in

acool, dry and dark place (sunlight will affect the quality).

7Never use the heater in places where harmful gasses or fumes may be present (e.g. exhaust gasses or

paint fumes).

8Bewarethat the grid of the heater becomes hot. If the appliance is covered there is a risk of fire.

• The first time you ignite your heater it will smell like ’new’ for a short time.

• Store your fuel in a cool and dark place.

•Fuel has a limited shelf life. Start every heating season with renewed fuel.

• The right quality of fuel will be assured, when you use ZibroExtra or ZibroKristal for

your heater.

• If you change to another brand and/or type of parrafin oil, you must first finish up all

the remaining fuel in the heater.

man_Laser73_uk.qxd 02-11-2006 10:44 Pagina 4

1. Introduction

This chapter contains all the relevant information,

specifically:

• Installation specifications

• List of installation tools

• Basic requirements for the installation of the fuel

tank

•Instructions for the installation of the Laser System

The heater can be installed at any location, on condi-

tion that thereis full compliance with electrical, fuel

and emission regulations.

Before you start installing the heating system (inclu-

ding electrical wiring and fuel supply equipment),

check the local building and fire safety regulations. The

requirements stipulated in these regulations must be

respected in order to guarantee a legally approved

installation and correct operation.

The heater was designed to be used to a

maximum altitude of 1000m above sea level.

Contact your dealer for the necessary

adjustments if you wish to use it at a higher

altitude.

2. Moving the heater

In addition to the space required for the heater,extra

room must be kept free for air circulation. The Laser

System can be placed on any type of flooring and oper-

ate safely, unless fuel or fire safety regulations specify

otherwise. Check the gaps in the manner stipulated in

the instructions in the manual.

Recommended tool kit

1. Crosshead screwdriver

2. Steel tape measure

3. Felt-tip pen or pencil

4. Cement for exterior use

5. Electric drill (clockwise and anti-clockwise

recommended)

6. Hole cutting saw, jig saw or other tools suitable for

sawing a hole of 70~80 mm for the exhaust pipe

7. Long drill

8. Standard screwdrivers

9. Adjustable spanners (various sizes)

10.Copper tube cutter

11.Reamer

12.Volt, Ohmmeter

13.Spirit level

14.Plumber’s tape for tube screw thread

15.Small range of self-tapping screws

16.Range of pliers (pin tongs, needle nose pliers,

cutting pliers, locking pliers)

17.Insulated screwdriver

18.Protective material for your floor

19.Container for fuel exhaust pipe

3. The electrical supply system

The electrical system must be protected from overloads

by an at least 5-Ampere fuse or contact breaker.

Some installations (such as for use in mobile

homes) must be fitted with a permanent

connection to the household power circuits.

This must be done by a recognised

electrician.

4. Fuel tank

Heater fuel (exclusively water-free, pure paraffin oil) in

200/1000 litrestorage tanks located outside. If large

tanks are used, a pressure regulator with a max. of 2.5

PSI (± 0.17 bar) must be fitted at the inlet on the

heater. This must be carried out in strict adherence to

all local standards and/or building regulations.

Chapter 1, INSTALLATION

☞

man_Laser73_uk.qxd 02-11-2006 10:44 Pagina 5

5. Wiring for the room temperature sensor

Atemperature sensor that can be fitted to a wall mea-

sures the room temperature in order to automatically

regulate the heating. The standard sensor wire is

approximately 2.5 m long.

The sensor may not be placed in a draught,

direct sunlight or the warm air flowing out

of the heater.This may cause incorrect

temperature indications.

6. Unpacking

Save all packaging materials for possible future trans-

portation.

A) Remove the cardboard (drilling) template and the

user’s manual from the packaging.

B) Remove the base plate and the box with the

installation kit from the packaging.

C) Remove the heater from the packaging.

D) Remove the plastic bag covering the heater.

E) Remove the plastic bag containing the parts.

F) Remove the exhaust pipe from the bottom of the

box.

G) Check that all parts are present.

Only the standard feed and exhaust system

is supplied with the heater.

Chapter 1, INSTALLATION

Fig. 1-1: Gaps heater/exhaust pipe

Laser 73

More than 60 cm

More than 30 cm

More than 1,5 m

More than 30 cm

Morethan 10 cm

☞

man_Laser73_uk.qxd 02-11-2006 10:44 Pagina 6

Chapter 1, INSTALLATION

Fig. 1-2 Gaps heater/exhaust pipe

Fig. 1-1 (continued) gaps heater/exhaust pipe

Flammable object

Not less than 60 cm

Flammable object

Non-flamma-

ble object

45°C

Not less than 30 cm

Exhaust pipe

Not less than 60 cm

Not less than 20 cm*

Not less

than 45 cm

Not less

than 45 cm

Frontal obstruction

45 cm or more

20 cm or more

Snow-covered surface or ground

Important: The gap with the ground must be enlarged in areas

subject to heavy snowfall. Important:Awindbreaker may be necessary in open areas that

aresubjected to strong winds.

Extension tube of

max. 3.0 metres

(with max. 3 bends) Must be higher

Snow

Strong wind

Distance from

exhaust pipe to

windbreaker mini-

mum 45 cm

Not less

than

45 cm Windbreaker

Not less than 20 cm*

*This clearance has to be present also in case of snowfall, etc.

man_Laser73_uk.qxd 02-11-2006 10:44 Pagina 7

☞

After using the installation template as a guide for the

drilling of the hole for the exhaust pipe, the Laser can

be installed normally, according to the procedure in the

illustration.

If the template is lost or the heater has to be moved,

these are the dimensions and locations of the holes for

the fuel pipe and exhaust pipe.

Do not remove any components from the

heater. Always contact your dealer if repairs

arerequired.

If the electricity cable is damaged, this may

only be replaced with type H05 VV-F and by

arecognised installer.

Chapter 1, INSTALLATION

Laser 73

Fig. 1-3 Template

Back of the heater

Fuel inlet

The center of

the flue pipe

Floor

Fuel inlet

12 3/8”

(310 mm)

12 3/8”

(310 mm)

35/8”

(92 mm)

35/8”

(92 mm)

17/8”(92 mm)

12 3/8”

(310 mm)

12 1/2”

(317 mm)

man_Laser73_uk.qxd 02-11-2006 10:44 Pagina 8

Chapter 1, INSTALLATION

Standard installation parts

The following list of standard installation parts is sup-

plied with your heater. It may be necessary to order

extra parts from your Zibro dealer if other installation

methods are required.

Base plate (1) Wall hooks (2 set)

Pipe holder (1) Pipe lock (1)

Exhaust pipe (1) Right-angled exhaust pipe bend (1)

(3) (3)

man_Laser73_uk.qxd 02-11-2006 10:44 Pagina 9

Chapter 1, INSTALLATION

Discharge chute (1) Right-angled air hose (2)

Flexible air hose (1) Hose clip (2)

man_Laser73_uk.qxd 02-11-2006 10:44 Pagina 10

Chapter 1, INSTALLATION

1. For the standard installation, use the template sup-

plied to position the hole for the exhaust pipe correct-

ly. Use cellotape or small nails to attach the template to

the desired position on the wall (see Fig. 4).

Fig. 4

Comment: The heater must be installed on a strong

and stable floor. The floor must be flat and level. If this

is not the case, the heater can be levelled by means of

adjustable legs. This can be checked with the plumb

line.

2. Drill the hole for the exhaust pipe. Use a hole saw

with a diameter of 70~80 mm (see Fig. 5). The opening

on the interior side of the wall must be a little higher

than the opening on the outside in order to create a

slight gradient in the feed-through and exhaust pipe

after installation (approximately 2º) (see Fig. 6). This

ensures that condensed water in the exhaust pipe flows

to the outside and prevents the penetration of rainwa-

ter and snow after installation.

Fig. 5 Fig. 6

2°

Tape

man_Laser73_uk.qxd 02-11-2006 10:44 Pagina 11

Table des matières

Langues :

Autres manuels Zibro Chauffage

Zibro

Zibro R 15 C Manuel utilisateur

Zibro

Zibro SRE 25 E Manuel utilisateur

Zibro

Zibro R 18 E Manuel utilisateur

Zibro

Zibro SRE 246 E Manuel utilisateur

Zibro

Zibro Kamin SRE 165 Manuel utilisateur

Zibro

Zibro Kamin R 55 C Manuel utilisateur

Zibro

Zibro SRE 228 TC Silver Manuel utilisateur

Zibro

Zibro R 263 T Manuel utilisateur

Zibro

Zibro SRE 170 TC Manuel utilisateur

Zibro

Zibro SRE 228 TC Silver Manuel utilisateur

Zibro

Zibro R 417 TC Manuel utilisateur

Zibro

Zibro Kamin R 27 C Manuel utilisateur

Zibro

Zibro SRE 152 Manuel utilisateur

Zibro

Zibro SRE 178 E Manuel utilisateur

Zibro

Zibro Kamin SRE 710 Manuel utilisateur

Zibro

Zibro Laser 56 Manuel utilisateur

Zibro

Zibro SRE 158 E Manuel utilisateur

Zibro

Zibro R 16 C Manuel utilisateur

Zibro

Zibro Kamin SRE 166 Manuel utilisateur

Zibro

Zibro SRE 168 E Manuel utilisateur

Zibro

Zibro SRE 177 Manuel utilisateur

Zibro

Zibro Kamin Champion Manuel utilisateur

Zibro

Zibro Kamin R 102 C Manuel utilisateur

Zibro

Zibro SRE 250 Manuel utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur