Zero Zero HOVER2 Manuel utilisateur
Quick Guide
© 2019 Zero Zero Robotics - All Rights Reserved
深圳零零无限科技有限公司 版权所有
快速入门指南
V201912
H2-1106
Sonar Sensor
Bottom Optical Sensor
Tail Indicator Light
USB-C Port
Protective Enclosure
Heat Vents
Propeller
Battery Level Indicator Light
Intelligent Battery
Power Button
Optical Radar
Status Indicator Light
Gimbal and Camera
Heat Vents
Snap-on Clip
（Protective Enclosure Only）
Reset Button
Wi-Fi / RC
Toggle Button
Micro SD Card Slot
HoverCamera_xxxxxx
Settings
WLAN
CHOOSE A NETWORK
Hover_2-xxxxxx
Step 1 Download Hover 2 App
Connect Hover 2
Step 2 Charging and Activation
Prepare Hover 2
Unfold Hover 2, and pop up the Optical Radar.
Connect your Mobile Device
Go to the Wi-Fi settings page of your mobile device
and connect to the Hover 2 hotspot.
Charge the Intelligent Battery
Download the “Hover 2” app from the
App Store / Google Play Store.
Press and hold the power button for 2 seconds
until the power light blinks. Once it’s finished
booting up, you will hear a sound.
Please charge the intelligent battery to activate it for
first time use.
Step 3
Step 4
*If the Hover 2 hotspot is not found, press and hold the Wi-Fi / RC toggle button
for 4 seconds, and try to connect again after hearing the beep.
*
Hover 2 App is compatible with iOS 10.0 (or above) or Android 5.0 (or above).
Wi-Fi name:
Hover_2-xxxxxx
Look for the password on:
1. The label on the box
2. The label on the drone body
3. The drone battery compartment
1
2
Install the Intelligent Battery
Remove the Intelligent Battery It takes about an hour to fully charge
Step 5 Step 7
Takeoff / Landing Hover 2
Check and Download Pictures & Videos
Method One:Connect Hover 2 and a mobile device via Wi-Fi.
Step 6 Enjoy Flying
Control with Hover 2 App
Open Hover 2 App and enjoy flying.
Landing with the Hover 2 App
Tap the “Return To Home” button,
Hover 2 will automatically start
flying back to the preset return point.
Or tap the “Landing” button
to land Hover 2.
Takeoff with the Hover 2 App
Tap the “ Takeoff ” button
to initiate takeoff.
Method Three:Connect Hover 2 and a mobile device with a cable.
Method Two:Connect Hover 2 and a computer with a cable.
(Adapter Required)
Please check the Disclaimer and Safety Instructions for more details at
zerozerorobotics.com/support/downloads.
Please read it carefully before flying.
Avoid touching the
Heat Vents immediately
after flight.
Attention:
Near strong magnetic fields
No-fly zones
Near crowds or dense buildings
In rain, fog, snow, lightning, hail,
storms, strong wind, or any other
extreme weather environments.
Improper Flying Environments:
Flight SafetyReplacing the Protective Enclosure
Flying with the Propeller Guards and the Landing
Gear can improve Hover 2's flight time and wind
resistance.
When the Protective
Enclosure is not in use,
install the Landing
Gear and takeoff on flat
ground.
Replace aging, broken
or deformed propellers. We recommend that
you maintain the
drone within your
visual line of sight.
Do not use undue
force or put excessive
pressure on the
Protective Enclosure.
Do not touch the
rotating propellers
with your fingers or
other objects.
了解更多信息，请前往官网下载《用户手册》。
*本指南如有更新，恕不另行通知。请登录官网获取最新信息。
*若使用掌上 RC 或航拍遥控器操控 Hover 2，请查看相应使用指南，
或登录 zerozerorobotics.com/support/downloads 查看。
*根据市场需求的变化或生产计划的调整，深圳零零无限科技有限公司
可能对产品规格、外观进行更改，如您有疑问请联系我们。
售后支持邮箱 :
微信公众号
服务热线 :
400-188-0053（10:00am——18：00pm)
Support Email:
Hotline:
650-477-0186（11:00am——17：00pm)
For more information, please download the User Manual
from the official website.
*This guide is subject to change without prior notice. Please visit the
official website for more detailed information.
*If you are using the Palm Pilot or BlastOff Controller to control Hover 2,
please check the corresponding user guide or check on
zerozerorobotics.com/support/downloads for operation details.
*According to changes in market demand or production plan,
Shenzhen Zero Zero Infinity Technology Co., Ltd. may change the
product specifications and appearance.Please contact us if you have
any questions.
电源键
视觉雷达
固定卡扣
（全保护外框用）
状态指示灯
一体式云台相机
声呐传感器
散热孔
散热孔
Micro SD 卡槽
恢复出厂设置按键
Wi-Fi / RC
控制模式切换按键
底部视觉传感器
机尾方向指示灯 智能电池
电池电量指示灯
螺旋桨
全保护外框
数据接口（USB-C）
第一步 下载并安装 Hover 2 App
第四步 连接 Hover 2
第二步 充电
第三步 准备 Hover 2
展开 Hover 2，请轻按视觉雷达使其弹出。
使用移动设备连接
进入移动设备的 Wi-Fi 设置页面，连接 Hover 2 热点。
* 请使用 iOS 10.0 及以上版本或 Android 5.0 及以上版本。
给智能电池充电
在应用商店搜索并下载“Hover 2”。长按电源键 2 秒至电源灯开始闪烁，等待开机音乐
响起，开机成功。
首次使用智能电池，需要充电激活。
*若未找到 Hover 2 热点，请长按 Wi-Fi / RC 控制模式切换按键 4 秒，
听到嘀嘀声后再次尝试连接。
HoverCamera_xxxxxx
设置
无线局域网
选取网络
Hover_2-xxxxxx
Wi-Fi名称:
Hover_2-xxxxxx
从以下位置查看密码:
1 . 包装盒内标贴
2. 机身标贴
3. Hover 2 电池仓
1
2
安装智能电池
取下智能电池 完全充满大约需要 1 小时
使用 Hover 2 App 一键放飞
或点击“一键降落” 图标，Hover 2
将自动原地降落。
点击“自动返航” 图标，Hover 2
将自动返航到预设的返航点。
第五步 放飞 / 收回 Hover 2
第六步 享受飞行
使用 Hover 2 App 控制飞行
打开 Hover 2 App，体验智能操控带来的飞行乐趣。
第七步 查看和下载拍摄内容
方法一：通过 Wi-Fi 连接 Hover 2 和手机
使用 Hover 2 App 收回
点击拍摄界面的“起飞”图标，
飞机将自动起飞
方法三：使用数据线连接 Hover 2 和手机
方法二：使用数据线连接 Hover 2 和电脑
（需要转接头）
更多安全事项请参考
zerozerorobotics.com/support/downloads 上的免责声明和安全
操作手册，飞行前请务必仔细阅读。
飞行结束时请避免
立即触碰散热孔
注意事项：
强磁场环境
禁止飞行的区域或建筑物周围
人群、建筑密集的区域
雨雪、雾霾、雷电、大风、冰雹、
沙尘等恶劣天气环境
不适用飞行环境：
飞行安全
建议在视线范围内
飞行
未使用全保护外框时，
请安装起落架，并将
Hover 2置于平坦地面
起飞
及时更换老化、破损或
变形的螺旋桨
请勿用力按压全保护
外框
手指或其他物品切勿
接触旋转中的螺旋桨
更换旋翼保护框及起落架可以提升 Hover 2 的飞行
时间和抗风性。
更换旋翼保护框及起落架
Autres manuels Zero Zero Drone
