Zenfox U1 Manuel utilisateur
Made in China
This user manual is available on
https://support.zenfox.com
User Manual
Package Component
Camera Parts
Memory Card
Installation
Button Scenario Guide
LED Indicators
Screen Overview
Operation
Firmware Upgrade
System Settings
Notice
Customer Service
Front Camera Rear Camera
(Optional)
Car Charger
Rear Camera
Cable (6M)
Rear Mount
+3M Sticker
Front Mount
+3M Sticker
2
3
4
5
10
11
12
13
18
19
24
25
Package ComponentContents
Type-C USB Cable
Card Reader
Adapter
Inserting / Removing the Memory Card
Camera Parts
Menu Down / Microphone Button
Recording Status Indicator
Memory Card Slot
Front Camera Lens
Reset Button
Wi-Fi Status Indicator
Menu Up / Recording Button
OK Button / Video Protect / Playback
Menu / Power On | Off
Live Video Source / Wi-Fi On | Off
Video Protect Button
Rear Camera Port / Power Input
Power Input
Mount Bracket
6
7
8
9
10
Rear Camera Lens
Power In + Video Out
Mount Bracket
15
11
12
13
14
1
2
3
4
5
16
17
Inserting the memory card
Removing the memory card
Note:
Make sure the metal contacts on the memory card
facing toward the screen. Ensure the camera is
turned off and push the memory card into the card
slot until you hear a click.
Ensure that the camera is turned off, and then push the
edge of the memory card with your fingernail. The card
will spring out far enough to be removed.
• The microSD card is sold separately. The microSD
card must be High Endurance type, have a UHS-U1/U3
or above rating and the capacity up to 256GB.
• Please format the card on a computer to the FAT32
file system.
• Formatting will permanently erase any data on the
microSD card. For best performance, format
periodically (after backing up any important files).
Warning:
• Please turn off the U1 before inserting or
removing the microSD card.
• Inserting or removing the microSD card
while recording may destroy the files.
(Optional)
8
3 4 5 6 7
14
15 16
17
12
11
13
9
10
1
2
InstallationInstallation
2. Slide the mount horizontally into
the slot on the camera. 3. Select a location on the
windshield behind the rear-view
mirror and clean the place. It is
better to install the camera
above the car rear-view mirror.
4. Peel the protection
film of the sticky pad
and camera lens. Fix
the front camera on
the selected location.
5. Look at the live view on
the LCD screen and adjust
the angle up / down if
necessary.
1. Insert microSD card to the
slot of the device.
InstallationInstallation
Rear Camera Installation (Optional)
6. Plug the Type-C power adapter
into your vehicle’s 12V / 24V female
power socket. Insert the long Type-C
cable’s male port into the camera's
mount Type-C port.
7. The whole look after front
camera installation and power
connection.
1. Select a location on the windscreen
where the camera can record the
entire rear view without defrosting grid
wires and clean the place.
2. Peel the protection film of the
sticky pad and camera lens. Fix
the rear camera on selected
location and adjust lens.
2
1
Button Scenario GuideInstallation
4. The overlook for dash cam installation.3. Rear camera connection. Power
off the product and connect the
rear camera cable to the front
camera (main unit).
Behavior
Move selector up
Stop/Start the video recording
Long press to turn on/off power
Click once to enter/exit setup menu
Move selector down
Microphone on/off
Click once to lock the file being recorded
Long press to turn on/off Wi-Fi
Switch live video source
Confirm the action
Lock currently recording video clip
Video playback
Buttons
Front Camera
2
1
Rear Camera
Note: Please stop recording to enter the menu.
Screen OverviewLED Indicators
LED Indicators
REC
Solid Red
Flashing Red
Solid Green
Green off
Recording
Not recording; Upgrade firmware
Wi-Fi Enabled
Wi-Fi Disabled
LED BehaviorLED Status
Video Mode
Recording Mode Recording Time
Video Resolution
Speed
GPS
microSD Card
Time
Wi-Fi
Parking Recording
Mode
Date
4KP30+1080P30
0KM/H
00:00:00
2021-06-25 19:12:10
Motion Detection
Microphone
Recording Status
Operation Operation
▶ Power on/off
The camera will automatically turn on/off and begin recording when you turn on/off the engine.
Insert a microSD card into the camera's card
slot and automatic loop recording will begin
once the camera detects power after you set
the loop recording time.
Time frame for each video file is
Off/1/2/3/5/10 minutes.
When there is insufficient space in the microSD
card, you can set the loop recording time in
the menu, loop recording will automatically
overwrite the oldest file one by one.
Loop recording files are saved to microSD
card:/DCIM/Movie folder.
Automatic emergency recording
When the G-sensor is activated by a
collision, the current footage will be locked
automatically to avoid being overwritten by
loop recording.
Manual emergency recording
Press the[ ]button or[ ]button
during a recording will lock the current
recording file. Once locked, the file will not
be overwritten by the loop recording feature.
Parking Mode: There are 3 options under parking mode:
①Auto Event Detection
The camera will automatically record for 1 minute while a moving object is detected while
car is parked and will stop recording if no new movement.
②Time Lapse recording
Time lapse record a video at low frames at 1 / 2 / 3 / 5 / 10 fps. It keeps recording
continuously without audio recorded.
③Low Bitrate Recording
This mode record video in low bitrate 4MB/s for both front and rear. It keeps recording
continuously in mini file size with audio recorded.
Also you can manually long press[ ]button to power on/off the camera.
▶ Loop Recording ▶ Emergency Recording
Note: Locked files are saved to microSD card: DCIM/MOVIE/RO
▶ Parking Mode
Operation Operation
Loop recording ( Including Motion Detection ) DCIM\Movie
DCIM\Movie\RO
DCIM\Movie
DCIM\Photo
Emergency recording ( Locked Video )
Snapshot
Parking recording ( Auto Event Detection/
Time-lapse Recording / Low Bitrate Recording )
▶ Recording mode
Files recorded by front camera and rear camera are saved separately.
File Format Definition
Recording mode In the memory card Under standby mode (not recording), click once
[ ]
button to enter the playlist.
Use the arrow buttons
[ ]
to select the desired video and press the button
[ ]
to play. Press the
[ ]
button to exit.
▶ Playback Videos
▶ GPS
An internal GPS could record data including time, date, speed, and location in the recorded
videos (only available when connected with GPS signal). If disabled, your camera will no
longer measure your speed and position, nor synchronize the time / date.
Please download the GPS Player tool from dashcamviewer.com, using Dashcam Viewer
could playback detailed information tracked by GPS on the computer.
▶ Play Back Video on Computer
1. Remove the microSD card from the dashcam.
2. Insert the card into the microSD card reader and connect it to a computer.
3. The computer will detect a “removable disk” .
4. There will be two folders under DCIM folder:
Movie (loop recording video files) contains subfolder: RO (Protected / Locked video files)
Photo (Video snapshot files)
5. Copy the files needed to your computer drive.
2021_0625_033039_042PF.MP4
2021_0625_033039_042PR.MP4
Year Date Time Sequence Number
F for the front camera
R for the rear camera
P for the video recorded in the
parking mode.
Operation Operation
Zenfox App
Zenfox APP will allow live view of cameras and settings adjustable using a smart phone
after connected with U1 Wi-Fi. Along with the live view, also support downloading videos /
images directly to your phone.
Download Zenfox APP
IOS users could download it on the APP store. Android users could download it on the Google
Play or download APK directly from our official website https://www.zenfox.com.
The app is free for Android devices and IOS devices.
▶ Connect with a Phone
Note: The default Wi-Fi password is 12345678. It can be changed by the Zenfox app. Please turn off
Wi-Fi if you do not use Zenfox app to prevent from draining the car battery.
Step 1
Step 2
Step 3
Step 4
▶ Connect Zenfox APP
• Before using a microSD card to upgrade the firmware, formatting the card in the camera
is necessary to ensure stable read and write operation.
• Do not unplug or power off the camera during a firmware upgrade, it may cause the
camera to subsequently fail to boot.
Firmware Upgrade
Follow the instructions on this website to upgrade the firmware:
(https://support.zenfox.com)
Use the phone to search and connect with U1 Wi-Fi.
Open Zenfox app and choose "Connect your camera" to use your phone to
control the dashcam.
Now you can see the live view of front and rear cameras. You can change the
settings and check the files on the microSD card.
Long press the[ ]button on the main camera to turn on Wi-Fi.
GET IT ON
Google Play
Download on the
App Store
Table des matières
