Zendure AIO 2400 Manuel utilisateur
Disclaimer
EN
Contents
Read all safety guidelines, warnings and other product information in this manual carefully, and read any labels
or stickers attached to the product before using. Users take full responsibility for the safe usage and operation
of this product. Familiarize yourself with relevant regulations in your area. You are solely responsible for being
aware of all relevant regulations and using Zendure products in a way that is compliant.
Keep this manual for future reference.
1. Safety Instructions
1.1 Usage
1. Read all up-to-date documents carefully before installing, using or servicing the product. Documentation is
subject to change over time.
2. Please check whether AIO 2400 is damaged, cracked, leaking liquids, becoming hot, or exhibiting other
abnormalities, and check any cables for damage before operating. If there are any problems, please stop
using the product immediately and contact our customer service.
3. Do not place heavy objects on top of the AIO 2400.
4. Make sure all cords and plugs are intact and dry before connecting to avoid electric shock.
5. Do not install or operate the system under extreme climatic conditions such as lightning. snow, heavy rain,
strong winds, etc.
6. To reduce the risk of injury, close supervision is necessary when the product is used near children.
7.
8. For safety purposes, please use only the original charger and cables designed for the equipment. We are not
liable for damage caused by third party equipment, and this may render your warranty invalid.
1. Safety Instructions.....................................................................................................................1
1.1 Usage .................................................................................................................................................................................1
1.2 FCC STATEMENT .............................................................................................................................................................2
1.3 EC DECLARATION OF CONFORMITY ...........................................................................................................................3
2. Explanation of the Symbols ..................................................................................................3
3. Important Tips ..........................................................................................................................4
4. What’s in the Box ....................................................................................................................4
5. Overview ................................................................................................................................... 5
5.2 Product Overview ..........................................................................................................................................................6
5.3 Button Controls ..............................................................................................................................................................6
5.4 Battery Level Display ....................................................................................................................................................7
6. Installing your AIO 2400 ......................................................................................................... 8
6.1 Pre-assembly ...................................................................................................................................................................8
6.2 Confirming where to install your AIO 2400..............................................................................................................9
6.3 Connecting Cables ....................................................................................................................................................... 11
6.4 Installation Method for the Top Cover .................................................................................................................... 13
6.5 Specifications ............................................................................................................................................................... 13
6.6 Download the Zendure App ...................................................................................................................................... 14
6.7 Disconnection of AIO 2400 ........................................................................................................................................ 15
EN
9. Keep a distance of 50mm between AIO 2400 and other objects.
10. During the operation of the solar energy system, avoid direct sunlight to prevent the AIO 2400 from
overheating. Do not place the AIO 2400 near any heat source.
11. Please install the product according to our user manual to avoid damage to the product or injury to other
people.
12.
13.
Since AIO 2400 relies on the shell to dissipate heat, exposing the enclosure to excessive heat will lead to
damage.
14. To reduce risk of damage to the electric cords and connectors, pull the connectors rather than the cord
when disconnecting the product.
15.
persons.
16.
17. Do not operate the product with a damaged cord or plug, or a damaged output cable.
18.
19.
20.Do not attempt to replace the internal components of the equipment by any unauthorized personnel. Have
the safety of the product is maintained.
21. AIO 2400 has a protection level of IP65, so the product cannot be immersed in liquids. If the product
accidentally falls into water during use, please place it in a safe and open area and stay away from it until it
is completely dry. The dried product should not be used again and should be properly disposed of according
to the disposal guidelines in this manual.
22.When charging a device, the product may feel warm. This is a normal operating condition and should not be
a cause for concern.
23.To reduce the risk of electric shock, unplug the power pack from the outlet before attempting any instructed
servicing.
24.When charging the internal battery, work in a well-ventilated area and do not restrict ventilation in any way,
as inadequate ventilation may cause permanent damage to the equipment.
25.
disconnected.
26.Do not clean the product with harmful chemicals or detergents. Only clean the ports with a dry cloth.
27.Do not move or shake the unit while operating as vibrations and sudden impacts may lead to poor
connections to the hardware inside.
28.Ensure that AIO 2400 and the Microinverter are installed securely to avoid accidents and product damage
caused by falling.
29.
30.Servicing of batteries should be performed or supervised by personnel knowledgeable about batteries and
the required precautions.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
1.2 FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1 ) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
2.
user's authority to operate the equipment.
2. Explanation of the Symbols
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
ZENDURE TECHNOLOGY CO., LIMITED declares that the AIO 2400 product complies with directive 2014/53/EU
(RED), 2011/65/EU(RoHS), 2015/863/EU(RoHS).
The full text of the Declaration of Conformity is available at the following web address: https://zendure.de/
pages/download-center
Declaration of conformity
The EU Declaration of Conformity can be requested at this address: https://zendure.de/pages/
download-center
Disposal and Recycling
Disposal of packaging: dispose of the packaging separately by type of material.
Dispose of old equipment (applies in the European Union and other European countries with
separate collection (waste collection)) Old equipment must not be disposed of in household
waste. Every consumer is legally obliged to dispose of old equipment that can no longer be used
separately from household waste, for example at a
collection point for recyclables.
To ensure proper recycling and avoid negative impact on the environment, electronic devices must
be taken to a collection point in their community or district. For this reason, electronic devices are
marked with the symbol shown here.
Batteries and accumulators must not be disposed of in household waste. As a consumer, you are
legally obliged to dispose of all batteries and accumulators, regardless of whether they contain
pollutants or not, at a designated collection point.
Marked with: Cd = Cadmium, Hg = Mercury, Pb = Lead. Return your product with built-in battery
only in a discharged state to your collection point.
1.3 EC DECLARATION OF CONFORMITY
Symbol Explanation
A high-risk hazard that, if not avoided, could result in death or serious injury.
Important information that you must pay attention to.
Part of a basic set
Optional (not included)
Indicates additional information on correct use or useful tips.
!
√
EN
3. Important Tips
4. What’s in the Box
The solar PV system is grid-tied. Please check if it is allowed in your area. Depending on the region,
Please check the required accessories before installation, as some accessories need to be
purchased separately.
the power to the Microinverter.
After AIO 2400 installation, it will take about 5 minutes before it can be connected to the grid, and
the data will be synchronized to the Zendure App within 20 minutes.
The output to Microinverter should not be greater than the rated power of your Microinverter.
removing.
AIO 2400 Wrench for Removing MC4
Connectors
30cm MC4
Output Cable × 4
AIO 2400 Bracket
Combination Set
User Manual
AIO 2400 should be protected from direct sunlight to prevent rapid temperature increase.
√
√
√
√
√
€
!
EN
5. Overview
1 2 3 5 6
4
No. Name Description Part of a basic set /
Optional (not included)
1 Solar Panel One AIO 2400 can connect with up to two sets of solar
modules.
2 Solar Cable For establishing the connection between AIO 2400 and
solar panels.
3 AIO 2400 /
4 Microinverter Converts DC power into AC power and feeds it into the
home grid.
5Zendure
Satellite Plug
Used to monitor device performance and communicate
wirelessly with AIO 2400 to optimize energy usage.
6
Zendure
Satellite Monitor
CT
√
5.1 System Overview
EN
5.2 Product Overview
5.3 Button Controls
1
12
5 6
3 4
7 8
2
3
5 4
7
6
8
427mm
657mm
150mm
Power Button
LED Light Strip
MC4 PV Input 2
Microinverter Output 1
IoT Button
MC4 PV Input 1
Antenna
Microinverter Output 2
automatically initiate the IoT connection. Users can directly connect to IoT in the Zendure App.
• After the device is bound to the Zendure App, when AIO 2400 is turned on again, the LED Light Strip light
• If you want to re-bind the account and reset the IoT connection, please press and hold the IoT button for 3
seconds to start the IoT connection.
• Turn On AIO 2400 System: Press and hold the power button 2 second to turn on AIO 2400.
• Turn Off AIO 2400 System: Press and hold the power button 2 seconds to turn off AIO 2400.
• AIO 2400 Hardware Reset: Press and hold the power button 10 seconds to reset AIO 2400.
Tips:
Button Action Function
Press for 2 second Turn AIO 2400 on
Press for 2 seconds Turn AIO 2400 off
Press once when powered on Check current battery level
Press for 10 seconds Reset AIO 2400
Press for 3 seconds Reset Internet connection
EN
Color Pattern Status
Solid Green Normal operation/Connected to the Internet
Blinking Green Internet Connection in Progress
Pulsing Green Built-in Battery Status
Blinking Red An error has occurred. For more details, check the Zendure App.
Pattern Status
100% 75% 50% 25% 5%
5.4 Battery Level Display
5.3 Button Controls
100%
75%
50%
25%
5%
EN
6. Installing your AIO 2400
6.1 Pre-assembly
This user guide only describes the cable connection method and assembly of the AIO 2400. To install the
solar modules, please read the instructions for the solar module and accessories.
If you want to check the function of the solar system, carry out the installation on a sunny day.
Choose a location for the AIO 2400
Make sure the AIO 2400 is within the Wi-Fi coverage area.
The protection class of the AIO 2400 is IP 65, so it can be used both indoors and outdoors.
EN
Table des matières
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur