3.2 Disposal Guide
1. When possible, fully discharge the battery before disposing of it. Consult
your local laws on battery recycling and disposal.
2. If the battery cannot be fully discharged due to product failure, contact
a professional battery recycling company for further processing.
3. When disposing of secondary cells or batteries, keep cells or batteries of
different electrochemical systems separate from each other.
3.1 Usage
1. Store product in a cool and dry place.
2. Do not dispose of the product in heat or fire.
3. Do not expose to moisture or submerge it in liquid.
4. Do not use around strong static electricity or magnetic fields.
5. Do not disassemble the product. Consult official Zendure channels when
service or repair is required. Incorrect disassembly or reassembly may
result in a risk of fire or injury to persons.
6. When using the product, please strictly follow the operating
environment temperature range specified in the user manual. If the
temperature is too high, it may result in a fire or explosion; if the
temperature is too low, the product performance may be severely
reduced, or the product may cease to work.
7. Do not block or obstruct the fan during use or place the product in an
unventilated or dusty area.
8. Ensure the product is not hit, dropped, or heavily vibrated. Securely
fasten the product when transporting to avoid damage. If severely
damaged, turn off the power source immediately and discontinue using
the product.
9. If you accidentally drop the product into water during use, please place
it in a safe open area, and stay away from it until it is completely dry.
The dried product should not be used again and should be properly
disposed of according to the Disposal Guide section of this manual.
10. Only clean the ports with a dry cloth.
11. Place on a flat surface to keep the product from falling over. If the
product is overturned and severely damaged, turn it off immediately,
place the battery in an open area, keep it away from people and
combustibles, and dispose of it in accordance with local laws and
regulations.
12. Keep out of reach of children and pets.
3. Safety Guidelines
Inputs
XT90 (1) 12V-150VDC 10A, 600W Max
Battery
Cell Chemistry
Cycle Life
SBS (Semi-solid State Battery) LFP
6,000+ cycles3,000+ cycles
* The temperature figures above refer to ambient temperature.
USB-A Firmware Update with USB Flash Drive
Temperature*
Optimal Operating
Temperature
Discharge Temperature
59°F to 95°F (15°C to 30°C)
-4°F to 140°F (-20°C to 45°C)
Charge Temperature
Storage Temperature
-4°F to 110°F (-20°C to 45°C) 0℉ to 110℉(0°C to 45℃)
14°F to 95°F (-10°C to 35°C)
ZDSATB6400 ZDSATB4600
