ZeeVee ZyPer4K Manuel utilisateur

Quad ZyPer4K Encoder Card

for Netgear M4300-96X

HDMI 2.0

IP A/V DISTRIBUTION SYSTEM

PART NUMBER: Z4KNGENC4

User Manual

Updated January 2020

About ZeeVee:

ZeeVee is the leading manufacturer of high-quality encoder/modulator/decoder products for

video distribution over any type of transmission media; be it RF coax, ﬁber, or copper ethernet.

Established in 2007, ZeeVee has been manufacturing industry-leading products while operating

the company responsibly in compliance with the strictest levels of regulatory and environmental

requirements. The standards by which we govern our corporate conduct are far higher than that

required by law.

Our mission is to completely fulﬁll the toughest customer application requirements with the

highest quality products we can produce. After the sale, we strive to support the customer with

award-winning support and service. Our goal is that no customer shall be ever be dissatisﬁed.

It is both our mission and our passion.

ZeeVee, Incorporated

295 Foster Street, Suite 200

Littleton, Massachusetts

01460, USA

www.zeevee.com

[email protected]

Phone: 1-877-493-3833

CONTENTS

Encoder Function 1.................................................................................

Quad Encoder for Netgear M4300-96X 1............................................

Package Contents 2.............................................................................

Installation Instructions and Notes 3....................................................

Product Limitations 3............................................................................

Setting up ZyPer4K in Many to Many Environment 4.............................

ZyPer Management Platform 6.......................................................................

Netgear M4300-96X 7.....................................................................................

Device Technical Speciﬁcations 8...........................................................

Encoder HDMI Video Speciﬁcations 8.................................................

Physical and Environmental 9..............................................................

Appendix A 10.........................................................................................

Resetting the Z4KNGENC4 Card 10....................................................

Disclaimers 11.........................................................................................

iii

ZyPer4K

Encoder Function

The function of the ZyPer4K Encoder Device (Encoder) is to accept audio and video data over a

variety of interface types, and translate that data to a format suitable for transmission over a

standard 10Gb Ethernet network. The encoder supports inputs up to 4K resolution including full

HDMI 2.0 support. (4K resolution 4:4:4 at 60Hz)

Video data is segmented, encrypted, prepared for transmission, and sent by the Encoder unit.

No unit other than those so designated by the control entity shall be able to receive the video

stream sent by an Encoder.

The format of the IP data is fully in compliance with industry-standard IEEE 802.3 Ethernet

networking practices. Any switch or device capable of passing 10G Ethernet trafﬁc can be

employed to carry ZyPer4K A/V trafﬁc.

Quad Encoder for Netgear M4300-96X

Designed exclusively for use with the Netgear M4300-96X, the ZyPer4K Quad Encoder Card

provides four HDMI 2.0 inputs and the full functionality of four independent encoders.

Port Name

Index

Deﬁnition

HDMI Port 1

HDMI 2.0 Input port. Capable of up to 4K60 with HDCP2.2 encryption.

HDMI Port 2

HDMI 2.0 Input port. Capable of up to 4K60 with HDCP2.2 encryption.

HDMI Port 3

HDMI 2.0 Input port. Capable of up to 4K60 with HDCP2.2 encryption.

HDMI Port 4

HDMI 2.0 Input port. Capable of up to 4K60 with HDCP2.2 encryption.

IR-OUT

Infrared Commands passed back FROM decoders as conﬁgured by ZMP.

Port Name

Z4K Quad Encoder

Page of111

ZyPer4K

Package Contents

One ZyPer4K Quad Encoder Card

Four IR Emitters

One IR Receiver

IR-OUT

Infrared Commands passed back FROM decoders as conﬁgured by ZMP.

IR-OUT

Infrared Commands passed back FROM decoders as conﬁgured by ZMP.

IR-OUT

Infrared Commands passed back FROM decoders as conﬁgured by ZMP.

IR-IN

Infrared Commands to be passed TO decoders as conﬁgured by ZMP.

RESET

Hardware Reset pin. Use paperclip or other tool to hold internal button for 25

seconds to force reset of the Z4KNGENC4 to factory defaults. See Appendix A

for details.

Index

Deﬁnition

Port Name

Z4K Quad Encoder

Page of211

IR Emitter (4x)

IR Receiver (1x)

Quad Encoder Card

ZyPer4K

Installation Instructions and Notes

The Z4KNGENC4 card is only compatible with the Netgear M4300-96X switch. The following

instructions should be followed closely to avoid damaging the card or the switch itself. Prior to

installation of the card, please ensure the latest available ﬁrmware is installed on the Netgear

M4300-96X switch.

https://www.netgear.com/support/product/M4300-96X.aspx#download

The card must be installed in top row of the M4300-96X switch. Bays 1-6 with the yellow arrows

pointing up as shown in the image below. A maximum of six cards are supported in a single

switch. Cards installed the lower bays will not function.

For the ﬁrst time installation of the card, power to the M4300-96X must be disconnected.

Failure to disconnect power when installing the card for the ﬁrst time can result in the card not

being properly identiﬁed by the M4300-96X switch.

Note: The Netgear M4300-96X should never be transported with any cards of any kind

installed. Please remove all cards when transporting/shipping the M4300-96X switch.

Product Limitations

The Z4KNGENC4 card provides the functionality of 4 independent ZyPer4K encoders with the

following restrictions/limitations compared to stand alone single encoder boxes.

1. Must use “slim” HDMI cable connectors to allow 4 cables to ﬁt side by side

2. Encoded Video can be routed to individual Full-Screen decoders, or Video Walls.!Multi-View

endpoint targets are not supported by the Z4KNGENC4

3. Preview of Encoded Video not supported by Z4KNGENC4

Z4K Quad Encoder

Page of311

ZyPer4K

Setting up ZyPer4K in Many to Many Environment

A many to many, or switched environment involves connecting many sources to many displays.

ZyPer4K allows you a ﬂexible and scalable amount of input-output options without limitations."

For example, in a 24-port conﬁguration, you can conﬁgure a 1x23, 6x18, or 4x20 (and so on)

system. A network switch is needed in these many to many conﬁgurations. These environments

also require conﬁguration through the ZyPer4K management software.

To set up ZyPer4K in a multipoint environment, you have to:

•Connect the ZyPer4K Management Platform hardware to the network switch

•Determine the IP Address of the ZMP (See the Management Platform User Guide

for details)

•Connect all Encoders and Decoders to the 10Gb network switch

•Connect a PC or Laptop to the network switch.

•Make sure laptop is on same “network” as the MP

•Open a Chrome browser and point it to the IP Address of the MP. (This opens ZyPer

Management Platform (ZMP))

•Login to the MP using the default username and password. “admin” / “admin”

•All devices (encoders and decoders) will automatically appear in ZMP

Z4K Quad Encoder

Page of411

Fiber or Copper

10 Gigabit

Ethernet Switch

ZyPer4K

•Switch (or route) video from sources to displays

•Drag source onto display to route video/audio

Z4K Quad Encoder

Page of511

Drag and!

Drop

IP Address of MP

ZyPer4K

ZyPer Management Platform

Each Z4KNGENC4 card installed in the system will show up as 4 independent ZyPer4K

encoders in the ZyPer Management Platform.

By default each encoder will be identiﬁed by its unique MAC address.

Example MAC: 80:1F:12:5D:8E:AB

Port MAC addresses can be found labeled on the underside of the card. Ports are numbered

from left to right.

The user can rename all of the encoders as desired.

The ZyPer Management Platform will treat the modular encoders just like any other encoders in

the system and allow you to route audio, video and IR from the encoder to any number of

decoders. Audio, Video and IR can all be routed independently.

Please note the Product Limitations on page 4. Modular inputs cannot be routed to a Multi-view.

Z4K Quad Encoder

Page of611

ZyPer4K

Netgear M4300-96X

The Z4KNGENC4 will automatically be detected by the Netgear M4300-96X switch. Media type

will appear as HDMI as shown in the image below:

Z4K Quad Encoder

Page of711

Autres manuels pour ZyPer4K

Table des matières

Autres manuels ZeeVee Convertisseur de média

ZeeVee

ZeeVee ZyPerMX Manuel utilisateur

ZeeVee

ZeeVee ZvBox 170 Fiche technique

ZeeVee

ZeeVee ZvBox 150 Fiche technique

ZeeVee

ZeeVee ZyPer4K Manuel utilisateur

ZeeVee

ZeeVee ZvPro i Series Manuel utilisateur

ZeeVee

ZeeVee HDbridge 2920i Manuel utilisateur

ZeeVee

ZeeVee HDbridge3000 Manuel utilisateur

ZeeVee

ZeeVee ZvPro 250 Fiche technique

ZeeVee

ZeeVee ZvBox 170 Feuille d'instructions

ZeeVee

ZeeVee ZvPro 600 Manuel utilisateur

ZeeVee

ZeeVee ZvPro 800 Manuel utilisateur

ZeeVee

ZeeVee ZvPro620 Fiche technique

ZeeVee

ZeeVee ZyPer4K Manuel utilisateur

ZeeVee

ZeeVee ZvBox 160 Fiche technique

ZeeVee

ZeeVee HDbridge 2840 Manuel utilisateur

ZeeVee

ZeeVee ZvPro 280 Fiche technique

ZeeVee

ZeeVee ZvPro Series Manuel utilisateur

ZeeVee

ZeeVee ZyPer4K-M Manuel utilisateur

ZeeVee

ZeeVee ZyPerMX4 Manuel utilisateur

ZeeVee

ZeeVee ZvBox 180 Fiche technique

ZeeVee

ZeeVee ZyPerMX Manuel utilisateur

ZeeVee

ZeeVee ZyPerMX2 Manuel utilisateur

ZeeVee

ZeeVee HDbridge 2920 Manuel utilisateur

ZeeVee

ZeeVee Zvb701 Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur