YUNEEC E- GO Manuel utilisateur
USER GUIDE
1
INDEX
INTRODUCTION
GEAR
CHARGE SETUP
SYNCING CONTROLLER AND BOARD
FEATURES
SPECIFICATIONS
SAFETY WARNINGS AND TIPS
TROUBLESHOOTING
SPARE PARTS
GARAGE
INSTALLATION GUIDE
01 ..................................
02 ..................................
03 ..................................
08 ..................................
09 ..................................
10 ..................................
11 ..................................
12 ..................................
16 ..................................
19 ..................................
20 ..................................
22 ..................................
INDEX
2
INTRODUCTION
Congratulations, you have purchased an E-GO. You are now the owner of a portable, eco-friendly mode of
transport that is incredibly fun to use. Integrating state of the art motor technology developed by
YUNEEC for use in the aviation industry, E-GO brings to the streets an experience and convenience that
was never available in the past.
Setting aside dated conventions, E-GO focuses on what is essential to the design of a sustainable trans-
port unit that functions in todays urban areas. Combining high performance with low consumption, the
E-GO CRUISER allows you to travel up to 30Km / 18Mi on one full charge. Its lightweight design and
compact dimensions make the E-GO the perfect wingman wherever you go: simply pick up your board and
step into a taxi, bus, train, or indoor location.
Boarding is often linked to extreme sports activities like surfing, skating, or snowboarding and there are
definitely similarities in the amount of freedom experienced when moving through space. However, E-GO
is foremost a city transport unit and distinguishes itself as such through features such as its advanced
braking system, giving the rider more control over his / her vehicle which is required to ensure the safety
of other people as well as his / her own.
Keeping the latter in mind, we would like to suggest you read through this users manual, to ensure you
understand fully how to properly set-up and use your E-GO and what general common sense to apply
when riding in a public area. The general rule to follow: Ride with consideration and style. We hope you
enjoy your E-GO experience!
GEAR
THE DECK THE BATTERY charge port
power switch
power status
indicator
USB port
2.4GHz / bluetooth switch
Electronic Control
Unit (ECU)
1.
2.
3.
4.
5.
6.
1
2
3
4
5
3
6
The E-GO features a 13mm, eight
layered composite wood deck,
making it flexible, durable and
strong: all the qualities a rider looks
for in a board. The deck surface is
finished with griptape to avoid
slipping.
E-GO’s sleek, low profile multi-cell
battery pack is located under the
deck, and utilises Yuneec’s latest,
patented battery technology. Its’
flexible battery casing allows the
deck to bend while riding.
4
THE TRUCKS
START
2
3 4
1
kingpin nut
baseplate nut
THE MOTOR
THE WHEELS
axle nut
bearing
By integrating technology developed
by Yuneec for use in the aviation
industry, the brushless 400 watt
motor provides reliable and efficient
power for your E-GO.
The E-GO`s 90mm wheels provide
traction and stability on an array of
surfaces, turning the E-GO into a
reliable urban transport system.
Connecting the wheels to the deck
are two alloy trucks made of the
highest grade materials available.
The trucks can be adjusted using the
truck tool.
(For more on the truck tool
see page 7)
5
7
START
7
89*
10
11
12
13
6
THE CONTROLLER
A key feature of the E-GO is without doubt
its sleek, pocket-sized, wireless controller
which allows you to intuitively control its
movements by simply sliding the throttle /
brake (7) up and down.
The battery status indicator's light (9)
indicates the wireless controller's and board’s
battery status:
Green light indicates the board’s battery
status. Blue light indicates the controller’s
battery status. Each light blinks 1,2,3 or 4
times in series. Each blink indicates 25% of the
total battery capacity.
When the board or controllers battery goes
under 25% of its maximum capacity, the
controller vibrates, its light will turn red and
blink 1 time. When charging - with the control-
ler connected to the board - a red light
indicates that the controller’s battery charge
is less 100%.
Example: (when activated but not charging)
the board's battery is completely empty and
the controller's battery has less than 75% of
its full charge capacity left 1 red blink will be
followed by 2 blue blinks.
(For more information on the yellow and purple warning
lights, reference troubleshoot page 19)
6
START button
throttle / brake
flash light
battery status indicator*
riding mode switch
speed mode switch
torch light switch
mini USB port
6.
7.
8.
9.
10.
11.
12.
13.
18
14
15
17
16
hex tool
phillips tool
nut tool
kingpin nut tool
axle nut tool
14.
15.
16.
17.
18.
THE TRUCK TOOL
To keep your E-GO's performance up to
maximum you will need to do regular main-
tenance checks (for more info on mainte-
nance please check page 17), making sure
the board is not obstructed by dirt and all
nuts and bolts are properly tightened. To
tighten and loosen these nuts and bolts,
your E-GO comes with a specific tool - the
truck tool - that allows you to do that. In
general you should make sure all parts are
screwed on there nice and tight, with the
exception of the kingpin nut which can be
adjusted according to your personal riding
style.
Tightening the kingpin will give a more stable,
rigid ride. Loosening the kingpin nut will make the
board more maneuverable and decreases the diame-
ter of your turn radius, allowing sharper turns.
7
charge status
indicator*
THE CHARGER
THE USB
THE PIN TOOL
*red = charging / green = charged
Use the USB to connect the wireless
controller to the board's USB port, to any
computer or any other USB port for
recharging purposes.
The E-GO charger allows you to fully
recharge the E-GO and the controller's
battery in 3 to 5 hours (depending on
charge left and ambient temprature)
giving you a maximum riding range of 30
km / 18 miles (depending on weight, road
conditions, riding style, etc...).
Also included with the E-GO is a small
pin-shaped object, which allows you to
access the speed mode switch on the
controller and the bluetooth switch on the
the board .
Charge lead depending
on sales area
8
CHARGE
SETUP
To ensure a healthy battery life,
recharge the battery for 6 hours
straight before first use. This will
condition the battery and give
better long term performance.
The board needs to be power-
ed on in order to charge the
wireless controller through
the usb port.
Charge lead
depending
on sales area
Autres manuels pour E- GO
7
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels YUNEEC Scooter
Manuels Scooter populaires d'autres marques
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Manuel utilisateur
Carrera
Carrera impel Manuel utilisateur
Afikim
Afikim Superlight SL-3 Manuel utilisateur
CareCo
CareCo ZOOM Manuel utilisateur
Douglas
Douglas Vespa G.S. Manuel utilisateur
Gazelle
Gazelle with BOSCH System Manuel utilisateur