Youcan Robot BW Space Pro Manuel utilisateur
BW Space Pro Max
Underwater Drone
V 1.0
User Manual
Contents
01
02
04
07
10
13
14
16
17
21
23
25
26
Disclaimer and Safety Instructions
Technical Specifications
Maintenance and Care
Contact Us
Remote Controller
Introduction of Oceaneye APP
Product Overview
Preparation
Shut down and Retrieval
Photos and Videos Exportation
Installation and Use of the Mechanical Arm
Connecting
Product List
01
Disclaimer and Safety Instructions
l. In order to protect the legitimate rights and interests of users, please read
carefully the instruction book, disclaimers and safety instructions provided
with this product before using it. Please be sure to operate this product
according to instruction book and safety instructions, and Youcan Robot
(Shanghai) Co., Ltd. owns the right to revise the above items.
2. Once you start using this product, you shall be deemed to have read,
understood,recognized and accepted all terms and contents of the
instruction book, disclaimers and safety instructions. The user shall only
utilize product solely for legitimate purposes and be responsible for their
own actions and all consequences.
3. In using this product, you're supposed to strictly comply with including
but not limited to requirements we have mentioned in safety instructions.
Users shall shoulder all responsibilities and losses caused by the violation of
safety instructions, including all personal injuries, accidents, property losses,
legal disputes and all other issues that may result in interest conflicts, and
Youcan Robot (Shanghai) Co., Ltd shall not bear any responsibility.
4. Youcan Robot (Shanghai) Co., Ltd. shall not be liable for any breach of law
directly or indirectly committed by our users.
1. Please check the product before use, including but not limited to the
durability of the parts, cracks and abrasion of the device body and propeller,
battery life, etc. When any abnormal situations are found, please stop using
and replace the accessories immediately.
2. Please do not use this product in harsh environments, such as strong wind,
heavy rain, thunder, fog, snow, tsunami, low temperature, etc.
3. The product shall not be used in the cases of alcohol drinking, fatigue,
seasickness, medicine taken, physical discomfort, etc.
4. In using this product, please keep away from the environment of high
electromagnetic interference, such as WiFi hot spots and high-power
transmission equipment.
Disclaimer
Safety Instructions
02
5. In using this product, please ensure your own safety and wear the life
jacket (self-provided), and keep away from dangerous areas and dangerous
marine life, such as the tiger shark and the great white shark.
6. When the product gives the low battery notification, you should stop using
the device in time. Please do not panic in case of incidents, such as outages,
broken ropes, etc. BW Space Pro Max will automatically come to the surface
by buoyancy.
7. Minors shall be accompanied by parents to use products or accessories to
avoid dangers.
8. Please do not use this product to take pictures of others or private
areas without permission, and do not use this product for reconnaissance,
espionage or military activities without authorization.
Please visit www.youcanrobot.com for the latest disclaimer and safety
instructions.
Product List
1
2
03
4 5
10
9
8
12
345
6 7 8
910
11
7
BW Space Pro Max Underwater Drone
Stand and Handle
Adapter Cable Sealing Lubricant and Sealing Ring
Wrench and other Tool Kits (used when installing the tether)
Charger Mechanical Arm Adapters and Mounting Bases
WiFi Repeater
Remote Controller
Tether Winder
11
04
Product Overview
BW Space Pro Max
WiFi Repeater
Vertical propeller
Vertical propeller
Vertical propeller
Communication/
Charging interface
Protection wing
Protection wing
Safety bolt
Camera
Horizontal propeller Horizontal propeller
LED LightLED Light
Working indicator
Power switch
Battery indicator
Type-c charging port Charging indicator
Cable connector
WANLAN
05
3. Description of the status of the power indicator of the WiFi Repeater:
M8 screws
M8*1 spacer
Handle
M8*1 spacer M8 screw nut
M8 cleat nut
Stand
BearingMagnet attachment point
Tether Winder
Cautions
Low
High
Battery
1. WiFi repeater can NOT operate in the water,so please do not put it into water.
2. WAN interface: Network interface, providing network signal for underwater
live broadcast.
LAN interface: can be connected to computers, notebooks and other equipment.
A B
when the power is lower than 25%,
the red light is on
06
【How to install and remove the handle】
•Insert the handle into the installation hole, insert and press the plastic
buckle on the inside of the winder; when removing, lift the buckle from the
inside of the winder, and then remove the handle.
• Align the four bases of the WiFi Repeater with the magnet attraction points
of the tether winder and fix them on the surface of the winder.
【WiFi Repeater xing method】
【How to install the Stand】
1. M8*1 gasket into the M8 screw from the A side and insert it
into the central hole of the tether winder;
2. Load the M8*1 gasket and bearing from the B side, and
then use the M8 screw nut to lock;
3. Install the bracket on the B side, and use a wrench to lock
the M8 cleat nut.
Tutorial Video
07
Instructions of Sealing Lubricant and Sealing Ring
• Apply sealing lubricant evenly to the sealing ring of communication/
charging interface and thread before using.
1. Seal the drone tightly and enhance the waterproof performance;
2. Act as a lubricant, making it easier to access the plug and reduce the loss
of the sealing ring;
The sealing ring is the spare part of the drone connector. When the original
sealing ring is damaged, please replace it in time to maintain waterproof.
【The functions of sealing lubricant】
Cautions
Preparation
Charging
【Charging of BW Space Pro Max】
08
Insert the connector of the charger with 4-pin jacks into the BW Space Pro
Max charging port, the power indicator turns red, indicating that charging
is in progress; when the power indicator turns green, it indicates that the
charging is complete.
【Charging of WiFi Repeater】
Connect the Type-c cable to the charging port of the WiFi Repeater, start
charging, and the red indicator light will turn on; the indicator light will turn
off, indicating that the charging is fully charged.
Please Turn off the Power
when charging
Cautions
1. When connecting the device, please align the socket first, and then rotate
the nut until it is tightened; when disassembling the connector, unscrew the
nut firstly ,then pull out the socket.
Tether connector Drone connector
Align
2. Prohibited to touch the connector front end with wet or sweaty hands;
water should be dried if there is water on the connector.
3. Charge the BW Space Pro Max and WiFi Repeater every three months.
4. Make sure to use the special charger provided by Youcan Robot.
1 2
Autres manuels pour BW Space Pro
4
Table des matières
Autres manuels Youcan Robot Drone
