Yongnuo YN686EX-RT Manuel utilisateur
1
To avoid fire or electrical shock, do not expose this product to rain or
moisture.
To avoid short circuit, please sure the batteries contacts are securely
packed and in accordance with local provisions when handling the
battery.
Please place the batteries and the parts which can be swallowed
mistakenly away from children. Contact a doctor immediately when it
occurs.
To avoid possible injury to eyes, do not use the flash light in a short
distance from the eyes.
To avoid possible safety accident, do not use the flash light on the people
who need a high degree of attention.
This product is dropped or shocked seriously and the inner part of this
product is bared.
Wear gloves and take the batteries out if the corrosive liquid inside the
batteries leaks.
This product gives off strange smell, heat or smokes.
Do not dissemble or maintain this product because the internal high
voltage circuit may cause the electric shock.
Please take out all the batteries if this product is not used for a long time.
Precaution
2
Portable Li-ion Battery System
YN686EX-RT is equipped with 2000mAh Li-ion battery, which makes
YN686EX-RT fires at least 600 times in full power possible.
Battery built-in Protective Circuit.
Battery built-in overcharge protection, short-circuit protection and
thermal-shutdown circuit, with advantages of long service life, high safety.
Ultrafast Charging Recycle System
Every great moment can be catched because it takes just 1.5s for
YN686EX-RT to finish charging recycle when it is used in full power.
Compatible with Canon Wireless RT System
In wireless radio transmission flash shooting, one YN686EX-RT can be
used as master unit to trigger YONGNUO RT speedlites and Canon RT
speedlites, and remotely control the flash mode and flash intensity of the
slave unit. One YN686EX-RT can be used as slave unit to receive
wireless signal from YONGNUO RT speedlites and Canon RT speedlites,
and realize remote TTL/M/MULTI/Gr flash.
Supports Wireless Optical Master Function
In wireless optical shooting, YN686EX-RT can be used as master unit to
trigger YONGNUO EX speedlites (except YN585EX)and Canon EX
series speedlite, and realize wireless flash in TTL/M/MULTI mode.
Supports Wireless Optical Slave Function
YN686EX-RT suports receiving wireless master signal from Canon
speedlites or Nikon speedlites, and it supports S1 and S2 flash mode.
High Guide Number, High-speed Sync
GN60@ISO100，200mm，supports TTL, M, MULTI and Gr flash, the
highest sync speed up to 1/8000s.
Supports USB Firmware Upgrade
YN686EX-RT is equipped with USB port. Please visit YONGNUO official
website to download the upgrade firmware and update the flash.
Supports Real-time Display of Battery Remaining Capacity
YN686EX-RT supports real-time display of battery remaining capacity,
which is convenient for you to learn the status of charge.
Supports Power Zoom
YN686EX-RT supports auto zooming and manual zooming. The flash
range can be adjusted from 20mm to 200mm.
Supports Auto-save, Custom Function (C.Fn)
Equipped with Big Size LCD Display Screen
Features
3
Precaution.......................................................................... 1
Features ............................................................................. 2
Quick Start ......................................................................... 4
Components Description.............................................. 5~9
Mount and Remove ......................................................... 10
Basic Functions......................................................... 11~16
Advanced Applications............................................. 17~20
Wireless Flash Shooting........................................... 21~26
C.Fn: Custom Settings.............................................. 27~28
Troubleshooting Guide ................................................... 29
Specifications ............................................................ 30~31
Conventions used in this user manual:
In order to learn and master the operation of this speed-lite, at the
meanwhile you read this manual, please take user manual of your
camera as reference.
In every operating step, we assume that both camera and speed-lite
are power on.
Icons used in this user manual
：Supplementary information
：Long press the button
：Short press the button
Contents
4
If you don’ t have much time to read the whole user manual, we
advise you to read this section.
1.Please avoid the excessive user of the output with maximum power. It
can effectively extend the service life of this product. (It’ s
recommended that the speedlite should be idle for more than 10
minutes when entering the overheat protection)
2.Long press [MODE] button to enter into trigger method selection
interface, and rotate [ ] to select trigger method.
3.Short press [MODE] button to switch flash mode: ETTL/M/MULTI/Gr.
(Gr mode can only work in wireless master mode.)
4.Rotate [ ] to adjust the selected parameters, and press [SET] button
to confirm and save the settings.
5.Short press [ ] button to enter into focal length setting status;
long press [ ] to enter into custom setting status.
6.Functional button 1-4 corresponding to different function according to
current state of the flash, operation and details please refer to the
following chapters.
7.By pressing and holding button 1 and button 3 simultaneously, the
flash parameters of the speedlite will be restored to default.
8.In off status, press and hold [MODE] button, the speedlites will be
turned on and it will enter into firmware upgrade interface.
Quick Start
5
Dial
Reflector
Wide-angle
diffuser panel
Flash head
Wireless sensor
Off-camera indicator
AF assist beam
Battery compartment cover
Hotshot contact Sound port
LINK : Wireless
connection indicator
Bounce angle index
USB port
Terminal cover LCD panel
Charging indicator/
TEST button
Power switch/
Lock switch
Functional button 1/2/3/4
Select/Set button
Hot shoe cantact Lock Button
[MODE]/
Flash mode button/
Trigger mode button
Components Description
6
LCD Panel
ETTL Mode
:Automatic zoom
:Manual zoom
ETTL:ETTL auto flash
:Over heat
Effective flash range
:High-speed sync
:Second-curtain sync
:Battery capacity
:Auto zoom for
sensor size
FEB sequence
:FEB
:Custom function
:Aperture
Distance indicator:M/feet
:Beep
Zoom focal length
Distance indicator scale
Function menu
Flash exposure level
M:Manual flash
Flash output
FEC
FEC amount
M Mode
Components Description
7
MULTI:Multi flash
Number of flashes
Flash mode
:Master unit
fires ON
:Master unit
fires OFF
Flash group
:Slave icon
:Slave
:Master control
:Wireless transmission
:Optical transmission
:Channel
:Channel auto-set
Flash light ratio
Flash frequency
Master Unit
Wireless Slave Unit
MULTI Mode
8
LINK indicator
Red light and blue
light blinking
Overheat protection mechanism is
activated.
Stop using the
speed-lite/shut down the
speed-lite until it cools
down.
Status of Charging
Indicator Meaning Method
Red light The speed-lite is fully charged and
can be used. Normal.
Blue light The speed-lite has not been fully
charged.
Waiting for completion of
charging.
Blue light blinking
A. Low battery; the speed-lite is
about to shut down
B. Overheat prompt
A. Please replace batteries.
B.Reduce flash frequency or
stop using the speed-lite
until it cools down.
Red light blinking Overheat prompt
Reduce flash frequency or
stop using the speed-lite
until it cools down.
Meaning of Indicator Light
Status of LINK
Indicator Meaning Method
Green Wireless master unit and slave unit
are in normal transmission. Normal
Check if the channel and ID
of the master unit and slave
unit are consistent.
Wireless master unit and slave
unit are not connected.
Blue
Green light +
Blue light Used as a slave unit Normal
Status of Indicator
Components Description
9
Sound Prompt
The Sound Form Meaning Method
The sound indicator is enabled; the
speed-lite is started and ready to
fire.
Tick twice Normal
Three ticks,
two times The exposure is possibly excessive. Adjust exposure compensation
or change the shooting condition.
Tick Tick Tick The exposure is possibly insufficient.
Adjust exposure
compensation or change the
shooting.
Tick-tick twice
-tick twice
The charging has not been
completed.
Wait for completion of
charging.
Tick-a long sound The speed-lite is fully charged and
can be used. Normal
Tick continuously
and quickly
Low battery; the speed-lite is about
to shut down.
Please replace the
batteries.
Tick-tick-tick- The speed-lite is in sleep mode and
it shuts down automatically.
Please turn off the
speed-lite and restart it.
Components Description
10
1.Install Batteries
Slide the battery compartment cover in the direction of the arrow as
shown.
Insert the batteries according to the label inside the battery compartment
and make sure the direction of the battery contact (+/-)is correct.
Close the battery compartment cover in the direction of the arrow as
shown.
2.Attaching to the Camera & Detaching from the Camera
Slip the speedlite’s mounting foot all the way into the camera’s hot shoe.
Slide the mounting foot lock lever to the right side as the arrow shown
until a “click” sound is heard.
3.Detaching
Slide the [lock button] to the left side and detach the speedlite.
Mount and Remove
Table des matières
Autres manuels Yongnuo Flash de l'appareil photo
Yongnuo
Yongnuo YN560-III Manuel utilisateur
Yongnuo
Yongnuo YN-568EX II Manuel utilisateur
Yongnuo
Yongnuo RF605 Manuel utilisateur
Yongnuo
Yongnuo YN510EX Manuel utilisateur
Yongnuo
Yongnuo YN-568EX II Manuel utilisateur
Yongnuo
Yongnuo YN968EX-RT Manuel utilisateur
Yongnuo
Yongnuo YN300W Manuel utilisateur
Yongnuo
Yongnuo YN560 Manuel utilisateur
Yongnuo
Yongnuo YN862V Manuel utilisateur
Yongnuo
Yongnuo YN560 Manuel utilisateur
