YOKOGAWA 751539-E2 Manuel utilisateur

User’s

Manual

1. Contents of the Package

Check that the following components are included in the package. If items are missing or if there is a

problem with the appearance of the items, contact your nearest YOKOGAWA dealer.

Spacer(2pcs)

Side bracket(S: 1pc, L: 1pc) Screw(M4x10 4pcs)

2. Removing Components for Rack Mounting

CAUTION

• When you remove the handle, be careful not to get your fingers caught between the handle

and the instrument. We recommend that you use a pair of gloves.

• To use the measuring instrument without attaching the rack mount kit, be sure to put the

protectors and handle back on.

Otherwise, foreign objects and the like may enter the inside of the measuring instrument

through the holes for attaching the rack mount kit and may cause electric shock or

malfunction.

1. Remove the protectors from the front and back of the DM7560.

2. Remove the handle. Move the handle to the position shown in the following figure, and pull the

attachment areas of the handle outward to remove the handle.

Protector

Handle

1st Edition : September 2016 (YMI)

Printed in Japan

Model 751539-E2

Rack Mounting Kit for DM7560

(Single-housing Rack, Inch)

IM 751539-E2-01EN (1/2)

1st Edition

IM 751539-E2-01EN (2/2)

3. Attaching the Rack Mount Brackets

1. Secure the side bracket in place with the included screws (M4) (two on each side). Insert

spacers between the measuring instrument and the side brackets.

Tightening torque reference: 1.4 to 1.5 N•m

Spacers

Side bracket(L)

Side bracket(S)

Screws

The above figure is an example of mounting the measuring instrument toward the left side. You can

mount the measuring instrument toward the right side by interchanging the small side bracket and

the large side bracket.

When using a rack manufacturer’s support bracket, attach it to the small bracket side.

4. Mounting to a Rack

Mount the measuring instruments according to the following dimensions.

Note: Make sure to provide adequate support from the bottom of the instruments.

482.4±0.4

465.7

88 0

-0.3

76.2

5.9

6.8±0.3

Mounting surface 5.3

356

Unit: mm

Table des matières

Autres manuels YOKOGAWA Support et étagère

YOKOGAWA

YOKOGAWA 751535-J4 Manuel utilisateur

YOKOGAWA

YOKOGAWA 751534-E2 Manuel utilisateur

YOKOGAWA

YOKOGAWA 701983 Manuel utilisateur

YOKOGAWA

YOKOGAWA 751535-E3 Manuel utilisateur

YOKOGAWA

YOKOGAWA DLM4000 Series Manuel utilisateur

YOKOGAWA

YOKOGAWA 751537-E2 Manuel utilisateur

YOKOGAWA

YOKOGAWA 751533-J3 Manuel utilisateur

YOKOGAWA

YOKOGAWA 751533-J4 Manuel utilisateur

YOKOGAWA

YOKOGAWA 751541-J4 Manuel utilisateur

YOKOGAWA

YOKOGAWA 751534-J2 Manuel utilisateur

YOKOGAWA

YOKOGAWA 751535-J3 Manuel utilisateur

YOKOGAWA

YOKOGAWA 751533-E4 Manuel utilisateur

YOKOGAWA

YOKOGAWA 751538-E2 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur