YEYIAN SIGURD 4000 Manuel utilisateur
PRODUCT REGISTRATION
Informatio n
and releases
Promotions
and update s
Giveaways
and gifts
WELCOME TO YEYIAN
A NEW LEVEL IN THE WORLD OF GAMING
You’re one of millions upon millions of gamers. You can be socially engaged, sporty, an
explorer,asoldier, abuilderorastrategist.Allofthesearchetypesrequiresupernatural
reexes, powerful machines, consistency and a strong tolerance to being defeated
hundreds upon hundreds of times before the fun kicks in. Even so, there is something
unique that each game will require of you, excitement and disruption; a moment
where you control what happens next, that eeting feeling of intimidation, the play
that will set you apart from the rest. Every decision you take, your condence, your
passion and you determination to win will take you to a monumental Victory.
Choose big, don’t conform, and always keep moving forward.
Be part of the game.
Thank you for choosing us and welcome to our family.
Register your products to receive exclusive news and participate in our contests
and giveaways.
USA I MX I ES:
www.yeyiangaming.com
CAUTION
Keep the monitor away from water sources or damp places, such as bathrooms,
kitchens, basements and swimming pools.
Make to place the monitor on a at surface. If the monitor falls down, it could lead
to injury or damage to the device.
Store and use the monitor in a cool, dry and well-ventilated place, and keep it away
from emission and heat sources.
Do not cover or block the vent hole in the rear casing, and do not use the product
on a bed, sofa, blanket or similar surfaces.
The voltage range of the monitor’s power supply is printed on the label on the rear
casing. If you can’t determine the voltage of your power outputs, please consult the
distributor or local power company.
If the monitor will not be used for a long period, please cut off the power supply to
avoid electric shock in rainy days or damage due to abnormal supply voltage.
Please use a plug with a reliable ground socket, do not overload the socket, or it
may cause re or electric shock.
Do not put foreign materials inside of the monitor, as they may cause short circuits
which could result in a re or electric shock.
Do not disassemble or repair this product yourself to avoid electric shock. If
malfunctions occur, please contact the after-sales service directly.
Do not pull or twist the power cable with force.
There is a polarizer layer (not a protective lm) on the surface of the screen. Do not
peel it off, or the product may be damaged and the warranty will be void.
The terms HDMI®, HDMI® High-Denition Multimedia Interface, and the HDMI® Logo
are trademarks or registered trademarks of HDMI® Licensing Administrator, Inc.
PACKAGE CONTENTS
Please check that the package for the monitor contains every part. If any part is
lost, please contact the distributor.
The color and shape of the parts may vary with models. Figures in this User Manual
are for reference only.
Wires supplied may vary depending on the purchased products. Figures in this
User Manual are for reference only.
User Manual
KM4x12 Screws x 3 PM4x16 Screws x 4 Mount Stand
Monitor Adjustable Stand StemStand Base
Power Cable
DP Signal Cable
Cable Clip
STAND INSTALLATION
1. Open the cardboard box, take the foam out and lay it at on the table top.
2. Take the cable clip, adjustable stand stem and stand base out.Remove the foam
covering the bottom of the monitor. Slide the cable clip down the back of the
adjustable stand stem to attach it to the adjustable stand stem.Use the screw to
fasten the stand base to the adjustable stand stem.
Stand Base
Adjustable Stand Stem
Cable Clip
Screw
3. Press the button to remove the stand cover, and use two screws to install the
adjustable stand stem.
Stand Plate
Button
Screws
4. Insert the stand plate onto the opening on the back of the monitor. It should click
into place. Make sure the stand is securely attached to the back of the monitor
before removing the monitor from the remaining foam and setting it up on a rm,
level table or desk.
Note: The stand can be easily detached from the monitor by pressing the button
near the stand cover. Make sure the monitor is laid on a at surface before
removing the stem.
MOUNT INSTALLATION
1. Open the box, take the product out with the foam still attached, and gently place
it on a desktop or table. Remove the extra parts and the foam covering the back of
the monitor. If the monitor has a stand attached to it already, remove the stand.
2. lf the stand was not installed, press the button to remove the stand cover.
Button
Stand Cover
3. Remove the original screws x 4 (1) from the opening in the back of the monitor
and put them aside. Then use the screws provided to attach the mount adapters
inside the opening.
Screws
Screws
Notes:
- Do not discard the original screws or the stand plate.
- Only use the provided screws. Refer to the image (2) for correct screw placement.
4. When hanging the product, do not press on the screen with your hand to avoid
damaging the screen.
Mount
Notes:
place.
- Do not place or hang any object on the mount, and don’t hang it at a height of over
2 meters.
®
ADJUSTING THE MONITOR
USAGE
1 Menu button: Press to enter sub-menus/ quickly enter the main menu
2 Down button: Press to move down in the menu/quickly enable crosshair mode
3 Up button: Press to move up in the menu/quickly enter contextual mode
4Exit/hot key: Press to return to the previous menu/quickly switch the color
format
5 Power button: Press to turn the monitor on/off
Indicator
Indicator: Steady blue light indicates the power is on and the monitor is in normal
operation. Flashing blue and red lights indicate that there is no video source, no
horizontal or vertical signal detected or insucient voltage. Please make sure your
computer is turned on and all video cables are fully plugged in and/or connected.
Insert one end of the display port cable into the monitor’s input port, and the other
end to the video output of your computer (dedicated or integrated video card).
Insert one end of the HDMI® cable into the monitor’s input port, and the other end
to the video output of your computer (dedicated or integrated video card).
You can connect headphones or speakers directly to the audio output of the
monitor through an audio cable with 3.5mm plug.
First, insert one end of the power supply cable into the power input jack of the
monitor, and the other end into the power outlet.
Table des matières
Langues :
Autres manuels YEYIAN Moniteur
