Yealink VC120 Manuel utilisateur

Yealink VC120 Video Conferencing System Quick Start Guide

Applies to firmware version 40.22.0.15 or later

V22.15

Yealink Network Technology CO., LTD

Table of Contents

Packaging Contents 01

VC120 Connections 02

Remote Control and Cable Ties Installation 04

Bracket and Camera Installation 05

Main Screen 07

Network Deployment 08

Troubleshooting 12

Power Adapter

(2m)

DVI Cable HDMI Cable 2 Ethernet Cable

Velcro 2

AAA Batteries 2

Camera VC120 Codec VCR10 Remote Control

Cable Ties 5

Quick Start Guide

Please use the Yealink-customized DVI cable.

We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party

accessories may result in reduced performance.

CPE80 Expansion

Microphone 2

VC120 video conferencing system can work with the video conferencing phone or video conferencing microphone

array. You can purchase any combination according to your needs.

Camera Mounting Accessories

HDMI-VGA Direct Cable

Video Conferencing

Phone

Ethernet Cable

(7.5m)

Ethernet Cable

(7.5m)

VCM30

Microphone Array Package

Video Conferencing Phone Package

3.5mm Audio Cable

Packaging Contents

VC120 Connections

Camera

HDMI Cable 2m Ethernet Cable Power Adapter

PC Display 2

DVI Cable

7.5m Ethernet Cable

CPE80 CPE80

Video Conferencing Phone

The video conferencing phone is used to be the audio input/output device:

HDMI-VGA Direct Cable

The VCM30 microphone array is used to be the audio input device:

Please connect to the Display1 port if you only have one display device

The system should be used with Yealink original power adapter (19V/3.42A) only. The use of the third-party power

Camera

HDMI Cable 2m Ethernet Cable Power Adapter

PC Display 2

DVI Cable

VCM30

7.5m Ethernet Cable

HDMI-VGA Direct Cable

adaptermay cause the damage to the system

Remote Control and Cable Ties Installation

Fasten the cables with the cable tie

Install batteries

Bracket and Camera Installation

Please chose the following installation mode when the thickness of the TV is between 35-120mm

Hanging Mode

Adjust the bracket to ensure close adhesion to the back of the TV

Lock the camera to the L-bracket.

Steps:

Make sure the back of the TV is clean, and then adjust the bracket to ensure close adhesion to the back of the TV

Remove the protection of the Velcro. Put the L-bracket on the top of the TV.

with Velcro.

The recommended height for camera positioning is 1.5m-1.8m above the ground

Wall Mount Method

Hole diameter: 6mm

Hole depth: 30mm

50mm

100mm 4

2Screw specification: M3 8

Screw specification: T4 30

Steps：Punch holes & Insert expansion bolts Drive screws Adjust the screws position and manually lock them

5 6

Insert screws to lock the bracket to the wall Connect DVI cable Lock the camera

Main Screen

Time and date Site name Status icon System IP address and

account information

Network Deployment

VC120 supports two network deployment methods: Cloud deployment and traditional deployment. Choose the desired

deployment method according to your needs.

Cloud Deployment

Select Menu->Advanced (Default Admin Password:0000)->Cloud.

In the Cloud Account filed, check the Enabled checkbox.

Select the desired platform from the pull-down list of Platform Type.

Configure the desired platform.

With Cloud service, organizations can communicate using the Cloud platform, so that complex network settings are

unnecessary. Both the head office and the branch offices can use this deployment method. You can log into Yealink

Cloud/StarLeaf/Zoom/Pexip/BlueJeans/Mind/Custom platform using VC120 video conferencing system. Get account

information from your administrator. Do the following to log into your VC120 via remote control:

Autres manuels pour VC120

Table des matières

Autres manuels Yealink Système de conférence

Yealink

Yealink VC120 Manuel utilisateur

Yealink

Yealink CP920 Manuel utilisateur

Yealink

Yealink MVC Series Manuel utilisateur

Yealink

Yealink T57W Manuel utilisateur

Yealink

Yealink RoomPanel Manuel utilisateur

Yealink

Yealink MVC Series Manuel utilisateur

Yealink

Yealink MeetingSpace VC800 Manuel utilisateur

Yealink

Yealink MeetingEye 600 Manuel utilisateur

Yealink

Yealink MVC400-C4-000 Manuel utilisateur

Yealink

Yealink MeetingBar A30 Kit Manuel utilisateur

Yealink

Yealink MeetingBar A30 Manuel utilisateur

Yealink

Yealink VC120 V Manuel utilisateur

Yealink

Yealink UVC40 Manuel utilisateur

Yealink

Yealink VC110 Manuel de service

Yealink

Yealink One Talk CP960 Manuel d'instructions

Yealink

Yealink MeetingSpace VC800 Manuel utilisateur

Yealink

Yealink VC120 Manuel utilisateur

Yealink

Yealink MVC S60 Manuel utilisateur

Yealink

Yealink MVC860-C5-000 Manuel utilisateur

Yealink

Yealink MVC640-C4-F13 Manuel utilisateur

Yealink

Yealink MVC Series: MVC800 Manuel utilisateur

Yealink

Yealink VC110 Manuel utilisateur

Yealink

Yealink VC400 Manuel de service

Yealink

Yealink MeetingBar A20 Manuel utilisateur

Manuels Système de conférence populaires d'autres marques

Kramer

Kramer VIA GO Manuel utilisateur

AVT

AVT MAGIC AC1 Go Manuel utilisateur

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuel utilisateur

Sony

Sony PCS-I150 Manuel utilisateur

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuel utilisateur

Prentke Romich Company

Prentke Romich Company Vanguard Plus Mode d’emploi

Speakerbus

Speakerbus iD 712 Manuel utilisateur

Trelleborg

Trelleborg SafePilot CAT PRO Manuel utilisateur

Sennheiser

Sennheiser ADN Manuel utilisateur

ADTRAN

ADTRAN NetVanta 7100 Manuel utilisateur

AINA

AINA PTT Voice Responder Manuel utilisateur

Yamaha

Yamaha ProjectPhone PJP-100H Manuel utilisateur

vissonic

vissonic VLI Series Manuel utilisateur

Panasonic

Panasonic KX-VC500 Manuel utilisateur

Poly

Poly Trio 8300 Manuel utilisateur

Crestron

Crestron Mercury CCS-UCA-SMK Dessin dimensionnel

Inmarsat

Inmarsat mini M Manuel utilisateur

Tenveo

Tenveo ALL-IN-ONE Manuel utilisateur