YASKAWA CDBR Series Manuel utilisateur

制動ユニット CDBR-

制動抵抗器ユニット LKEB-

制動ユニット，制動抵抗器ユニット

安川インバータオプション

取扱説明書

BRAKING UNIT CDBR-

BRAKING RESISTOR UNIT LKEB-

Braking unit,

Braking resistor unit

YASKAWA AC Drive Option

Installation Manual

To properly use the product, read this manual thoroughly and retain

for easy reference, inspection, and maintenance. Ensure the end user

receives this manual.

MANUAL NO. TOBP C720600 00F

製品を安全にお使い頂くために，本書を必ずお読みください。

また，本書をお手元に保管していただくとともに，最終的に本製品をご使用になる

ユーザー様のお手元に確実に届けられるよう，お取り計らい願います。

PREFACE

Braking resistor unit and braking unit are used to con-sume regenerative

energy from motor in the braking resistor unit at deceleration and to

improve the transis-tor inverter braking ability.

Before using the braking resistor unit and braking unit, a thorough under-

standing of this manual is recom-mended. This instruction manual will be

of great help for daily maintenance, inspection and troubleshoot-ing.

Inverters to which the braking resistor unit and braking unit can be con-

nected are of the following series:

• YASKAWA AC Drive 1000 Series

• Varispeed Series

Wiring sequence should shut off power to the drive when a braking

resistor Overload Relay Trip Contact (Thermal Protector Contact)

output is triggered.

NOTENOTE

General Precautions

SSome drawings in this manual are shown with the protective cover or shields

removed, in order to describe with more clarity. Make sure all covers and

shields are replaced before operating this product.

SSince the drawings in this manual are represented examples, some are subject

to differ from delivered products.

SThis manual may be modified when necessary because of improvement of the

product, modification or changes in specifications. Such modifications are

denoted by a revised manual No.

STo order a copy of this manual, if your copy has been damaged or lost, contact

your YASKAWA representative.

SYASKAWA is not responsible for any modification of the product made by the

user since that will void your guarantee.

NOTES FOR SAFE OPERATION

Read this instruction manual thoroughly before installation, operation,

maintenance or inspection of the braking unit and the braking resistor unit. In this

manual, NOTES FOR SAFE OPERATION are classified as “WARNING” or

“CAUTION.”

Indicates a potentially hazardous situation which, if not avoided, could result in

death or serious injury to personnel.

Indicates a potentially hazardous situation which, if not avoided, may result in

minor or moderate injury to personnel and damage to equipment.

It may also be used to alert against unsafe practices.

Even items described in CAUTION may result in a vital acci-

dent in some situations. In either case, follow these important notes.

: These are steps to be taken to insure proper operation.

WARNING

CAUTION

NOTENOTE

WIRING

(Ref. page)

• Only commence wiring after verifying that the power sup-

ply is turned OFF.

Failure to observe this warning can result in an electrical shock

or a fire.

• High voltage exists at all terminals of braking unit and

braking resistor unit.

Failure to observe this warning can result in an electrical shock.

• Wiring should be performed only by qualified personnel.

Failure to observe this warning can result in an electrical shock

or a fire.

• Wiring sequence should shut off power to the drive when

a braking resistor Overload Relay Trip Contact (Thermal

Protector Contact) output is triggered.

Failure to observe this warning can result in a fire.

• When wiring the emergency stop circuit, check the wiring

thoroughly before operation.

Failure to observe this warning can result in personal injury.

• Make sure to ground the ground terminal.

(Ground resistance

200V class: 100Ω. or less, 400V class: 10Ω. or less)

Failure to observe this warning can result in an electrical shock.

• Short Circuit Current Rating (SCCR)

Install adequate branch short circuit protection according to applicable

codes. Failure to comply could result in damage to the drive. The device is

suitable for circuits capable of delivering 31,000 RMS symmet-rical

Amperes, 240 Vac maximum (200V Class), 480 Vac maximum (400V Class)

and 575Vac (600V Class) or the SCCR rating of the drive it is connected to,

which ever is greater.

WARNING

CAUTION

(Ref. page)

SVerify that the rated voltage of the braking unit and the braking

resistor unit coincides with the AC power supply voltage.

Failure to observe this caution can result in personal injury or a fire.

SDo not perform a withstand voltage test of the braking unit and

braking resistor unit.

It may cause semi−conductor elements to be damaged.

SConnect braking resistors, braking resistor units, and braking

units as shown in the I/O wiring examples. Use properly rated

wire in accordance with table 2 on page 31.

Otherwise, a fire can occur.

STighten terminal screws to the specified tightening torque.

Failure to observe this caution can result in a fire.

SBe sure to connect braking resistors or braking resistor units

to the braking units.

If neither braking resistor nor braking resistor unit is connected to a

braking unit, the fault contact may instantaneously turn ON when

the power is turned ON, resulting in malfunction of the inverter.

OPERATION

WARNING

(Ref. page)

SOnly turn ON the input power supply after replacing the front

cover. Do not remove the cover while current is flowing.

Failure to observe this warning can result in an electrical shock.

CAUTION

(Ref. page)

SNever touch the heatsink or discharging resistor since the

temperature is very high.

Failure to observe this caution can result in harmful burns to the

body.

SDo not check signals during operation.

The machine or the inverter may be damaged.

SAll the constants ofthe the braking unit andthe braking resistor

unit have been preset at the factory. Do not change the

settings unnecessarily.

CAUTION

(Ref. page)

SThe control PC board employs CMOS ICs. Do not touch the

CMOS elements.

They are easily damaged by static electricity.

SDo not connect or disconnect wires or connectors while power

is applied to the circuit.

Failure to observe this caution can result in personal injury.

OTHERS

WARNING

SNever modify the product.

Failure to observe this warning can result in an electrical shock or

personal injury and will invalidate the guarantee.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels YASKAWA Entraînement CC

YASKAWA

YASKAWA Drive-V1000 Manuel utilisateur

YASKAWA

YASKAWA SI-S3/V Series Manuel utilisateur

YASKAWA

YASKAWA L1000V CIMR-LC V Series Manuel utilisateur

YASKAWA

YASKAWA CIMR-E7 series Manuel utilisateur

YASKAWA

YASKAWA CIMR-JB Series Manuel d'installation et d'exploitation

YASKAWA

YASKAWA Z1000 CIMR-ZU*A Series Guide de configuration

YASKAWA

YASKAWA MECHATROLINK-III Manuel utilisateur

YASKAWA

YASKAWA P1000 Manuel utilisateur

YASKAWA

YASKAWA VS-616PS5 Series Manuel du propriétaire

YASKAWA

YASKAWA JVOP-181 Instructions de montage

YASKAWA

YASKAWA 1000-Series Manuel utilisateur

YASKAWA

YASKAWA CIMR-JCBA0001 Manuel utilisateur

YASKAWA

YASKAWA SGM series Manuel utilisateur

YASKAWA

YASKAWA FP65U T Series Mode d’emploi

YASKAWA

YASKAWA DeviceNet SI-N3 Manuel utilisateur

YASKAWA

YASKAWA Varispeed f7 Manuel utilisateur

YASKAWA

YASKAWA GA700 GA700 Series Manuel utilisateur

YASKAWA

YASKAWA JOHB-SMP3 Manuel utilisateur

YASKAWA

YASKAWA GA700 Manuel utilisateur

YASKAWA

YASKAWA GPD315/V7-4X Manuel utilisateur

YASKAWA

YASKAWA PROFINET V1000 Manuel utilisateur

YASKAWA

YASKAWA VS-616PS5 Series Manuel d'instructions

YASKAWA

YASKAWA GA500 series Manuel utilisateur

YASKAWA

YASKAWA J1000 CIMR-JC series Manuel utilisateur

Manuels Entraînement CC populaires d'autres marques

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Manuel utilisateur

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Manuel de la liste des pièces

Chamberlain Garog

Chamberlain Garog D Series Manuel utilisateur

Parker

Parker PDS Series Manuel utilisateur

Festo

Festo DGC G Series Guide de configuration

Binks

Binks QS-5012-1-CE Manuel utilisateur

Danfoss

Danfoss VLT 2800 Series Fiche technique

ABB

ABB ACQ580-01 Series Manuel d'installation

GE D20A6 Manuel utilisateur

Unex

Unex MC-D-250-1000-050W-TW Manuel utilisateur

Geckodrive

Geckodrive G213V Manuel utilisateur

ABB

ABB RSYC-01 Manuel utilisateur

Rockwell Automation

Rockwell Automation PowerFlex 700S Manuel du propriétaire

WEG

WEG DeviceNet CFW500 Manuel utilisateur

Siemens

Siemens SINAMICS G Fiche technique

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Mode d'emploi

SOMFY

SOMFY JR RU 30 Manuel utilisateur

Beckhoff

Beckhoff AX8911 Manuel de l'opérateur