YASKAWA Motoman DX200 Manuel utilisateur
MANUAL No.
HW1483763
DX200 OPTIONS
INSTRUCTIONS
SUPPLEMENT FOR FPD HANDLING USE
Upon receipt of the product and prior to initial operation, read these
instructions thoroughly, and retain for future reference.
MOTOMAN INSTRUCTIONS
MOTOMAN- INSTRUCTIONS
DX200 INSTRUCTIONS
DX200 OPERATOR’S MANUAL (for each purpose)
DX200 MAINTENANCE MANUAL
The DX200 Operator’s manual above corresponds to specific usage. Be sure
to use the appropriate manual.
Part Number: 174117-1CD
Revision: 0
1 of 23
HW1483763
ii HW1483763
Copyright © 2016, Yaskawa America, Inc.
Terms of Use and Copyright Notice
All rights reserved. This manual is freely available as a service to Yaskawa customers to assist in the
operation of Motoman robots, related equipment and software This manual is copyrighted property of
Yaskawa and may not be sold or redistributed in any way. You are welcome to copy this document to
your computer or mobile device for easy access but you may not copy the PDF files to another website,
blog, cloud storage site or any other means of storing or distributing online content.
Printed in the United States of America
First Printing, 2016
Yaskawa America, Inc.
Motoman Robotics Division
100 Automation Way
Miamisburg, OH 45342
Phone: 937-847-6200
www.motoman.com
2 of 23
HW1483763
iii HW1483763
MANDATORY
• This manual explains the controller of the DX200. Read this manual carefully and be
sure to understand its contents before handling the DX200.
General items related to safety are listed in the Chapter 1: Safety of the DX200
instructions. To ensure correct and safe operation, carefully read the DX200
instructions before reading this manual.
CAUTION
• Some drawings in this manual are shown with the protective covers or shields
removed for clarity. Be sure all covers and shields are replaced before operating
this product.
• The drawings and photos in this manual are representative examples and
differences may exist between them and the delivered product.
• YASKAWA may modify this model without notice when necessary due to product
improvements, modifications, or changes in specifications. If such modification is
made, the manual number will also be revised.
• If your copy of a manual is damaged or lost, contact a YASKAWA representative to
order a new copy. The representatives are listed on the back cover. Be sure to tell
the representative the manual number listed on the front cover.
• YASKAWA is not responsible for incidents arising from unauthorized modification
of its products. Unauthorized modification voids your product’s warranty.
3 of 23
HW1483763
iv HW1483763
We suggest that you obtain and review a copy of the ANSI/RIA National Safety Standard for Industrial
Robots and Robot Systems (ANSI/RIA R15.06-2012). You can obtain this document from the Robotic
Industries Association (RIA) at the following address:
Robotic Industries Association
900 Victors Way
P.O. Box 3724
Ann Arbor, Michigan 48106
TEL: (734) 994-6088
FAX: (734) 994-3338
www.roboticsonline.com
Ultimately, well-trained personnel are the best safeguard against accidents and damage that can result
from improper operation of the equipment. The customer is responsible for providing adequately
trained personnel to operate, program, and maintain the equipment. NEVER ALLOW UNTRAINED
PERSONNEL TO OPERATE, PROGRAM, OR REPAIR THE EQUIPMENT!
We recommend approved Yaskawa training courses for all personnel involved with the operation,
programming, or repair of the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
4 of 23
HW1483763
vHW1483763
Notes for Safe Operation
Read this manual carefully before installation, operation, maintenance, or inspection of the DX200. In
this manual, the Notes for Safe Operation are classified as “DANGER”, “WARNING”, “CAUTION”,
“MANDATORY”, or “PROHIBITED”
DANGER
Indicates an imminent hazardous situation which, if not
avoided, could result in death or serious injury to
personnel.
WARNING
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury to
personnel.
CAUTION
Indicates a potentially hazardous situation which, if not
avoided, could result in minor or moderate injury to
personnel and damage to equipment. It may also be
used to alert against unsafe practices.
MANDATORY Always be sure to follow explicitly the items listed under
this heading.
PROHIBITED Must never be performed.
Even items described as “CAUTION” may result in a serious accident in some situations.
At any rate, be sure to follow these important items
To ensure safe and efficient operation at all times, be sure to follow all
instructions, even if not designated as “DANGER”, “WARNING” and “CAUTION”.
5 of 23
HW1483763
vi HW1483763
WARNING
• Before operating the manipulator, check that servo power is turned OFF pressing the
emergency stop buttons on the front door of the DX200 and the programming pendant.
When the servo power is turned OFF, the SERVO ON LED on the programming pendant is
turned OFF.
Injury or damage to machinery may result if the emergency stop circuit cannot stop the
manipulator during an emergency. The manipulator should not be used if the emergency stop
buttons do not function.
Fig.: Emergency Stop Button
• Once the emergency stop button is released, clear the cell of all items which could interfere
with the operation of the manipulator.
Then turn the servo power ON.
Injury may result from unintentional or unexpected manipulator motion.
Fig.: Release of Emergency Stop Button
• Observe the following precautions when performing teaching operations within the P-point
maximum envelope of the manipulator:
- Be sure to use a lockout device for safeguarding when going inside. Also, display a sign
that an operation is being performed inside the safeguarding and make sure no one closes
the safeguarding.
- View the manipulator from the front whenever possible.
- Always follow the predetermined operating procedure.
- Keep in mind the emergency response measures against the manipulator’s unexpected
motion toward you.
- Ensure that you have a safe place to retreat in case of emergency.
Improper or unintended manipulator operation may result in injury.
• Confirm that no person is present in the P-point maximum envelope of the manipulator and
that you are in a safe location before:
- Turning ON the power for the DX200.
- Moving the manipulator with the programming pendant.
- Running the system in the check mode.
- Performing automatic operations.
Injury may result if anyone enters the P-point maximum envelope of the manipulator during
operation. Always press an emergency stop button immediately if there is a problem.
The emergency stop buttons are located on the right of front door of the DX200 and the
programming pendant.
6 of 23
HW1483763
vii HW1483763
CAUTION
• Perform the following inspection procedures prior to conducting manipulator teaching. If
problems are found, repair them immediately,
and be sure that all other necessary processing has been performed.
– Check for problems in manipulator movement.
– Check for damage to insulation and sheathing of external wires.
• Always return the programming pendant to the hook on the cabinet of the DX200 after use.
The programming pendant can be damaged if it is left in the manipulator's work area, on the
floor, or near fixtures.
• Read and understand the Explanation of Warning Labels in the DX200 Instructions before
operating the manipulator:
Definitions of Terms Used Often in This Manual
The MOTOMAN is the YASKAWA industrial robot product.
The MOTOMAN usually consists of the manipulator, the controller, the programming pendant, and
supply cables.
In this manual, the equipment is designated as follows
Equipment Manual Designation
DX200 controller DX200
DX200 programming pendant Programming pendant
Cable between the manipulator and the
controller
Manipulator cable
Registered Trademark
In this manual, names of companies, corporations, or products are trademarks, registered
trademarks, or brand names for each company or corporation. The indications of (R) and TM
are omitted.
7 of 23
HW1483763
viii HW1483763
Customer Support Information
If you need assistance with any aspect of your system, please contact Motoman Customer Support at
the following 24-hour telephone number:
(937)847-3200
For routine technical inquiries, you can also contact Motoman Customer Support at the following
e-mail address:
When using e-mail to contact Motoman Customer Support, please provide a detailed description of
your issue, along with complete contact information. Please allow approximately 24 to 36 hours for a
response to your inquiry.
Please use e-mail for routine inquiries only. If you have an urgent or emergency need for service,
replacement parts, or information, you must contact Motoman Customer Support at the telephone
number shown above.
Please have the following information ready before you call:
• System DX200
• Primary Application FPD Handling
• Controller DX200
• Software Version Access this information on the
Programming Pendant’s LCD
display screen by selecting {MAIN
MENU} - {SYSTEM INFO} -
{VERSION}
• Robot Serial Number Located on the robot data plate
• Robot Sales Order Number Located on the DX200 controller
data plate
8 of 23
HW1483763
Table of Contents
ix HW1483763
Table of Contents
1 Introduction ................................................................................................................................... 1-1
2 Power Capacity............................................................................................................................. 2-1
3 Basic Specifications ...................................................................................................................... 3-1
3.1 Standard module ........................................................................................................................ 3-1
4 Controller Type List....................................................................................................................... 4-1
5 Dimension Diagram and Internal Arrangement Diagram.............................................................. 5-1
6 The List of the Equipment Configuration ...................................................................................... 6-1
7 Recommended Spare Parts List................................................................................................... 7-1
9 of 23
HW1483763
Introduction
1-1 HW1483763
1 Introduction
This manual is a supplementary instruction manual for the DX200.
The described contents are as follows;
i ) Power Capacity
ii ) Basic Specifications
iii ) Controller Type List
iv ) Dimension Diagram and Internal Arrangement Diagram
v) The List of the Equipment Configuration
vi ) Recommended Spare Parts List
For contents that are not described in this manual, refer to the “DX200 INSTRUCTIONS”, “DX200
MAINTENANCE MANUAL”, and all other related documents.
Before using this product, read this manual and all other documents carefully to
ensure knowledge about the product and safety, including all the cautions.
10 of 23
Autres manuels pour Motoman DX200
34
Table des matières
Autres manuels YASKAWA Contrôleurs
YASKAWA
YASKAWA motoman NX100 Manuel utilisateur
YASKAWA
YASKAWA L1000A Series Manuel utilisateur
YASKAWA
YASKAWA SGD7S series Manuel utilisateur
YASKAWA
YASKAWA mp2500 Manuel utilisateur
YASKAWA
YASKAWA motoman NX100 Manuel utilisateur
YASKAWA
YASKAWA MP2000iec Guide de l'administrateur
YASKAWA
YASKAWA J1000 CIMR-JC series Manuel utilisateur
YASKAWA
YASKAWA YRC1000 Manuel utilisateur
YASKAWA
YASKAWA PROFINET V1000 Manuel utilisateur
YASKAWA
YASKAWA YRC1000micro Manuel utilisateur
YASKAWA
YASKAWA SI-EP3 Manuel utilisateur
YASKAWA
YASKAWA J1000 CIMR-JC series Manuel utilisateur
YASKAWA
YASKAWA yasnac i80m Manuel utilisateur
YASKAWA
YASKAWA SMG Series Manuel utilisateur
YASKAWA
YASKAWA Motoman DX200 Manuel utilisateur
YASKAWA
YASKAWA MP2300S Manuel utilisateur
YASKAWA
YASKAWA CIMR-V7xx20P1 series Manuel utilisateur
YASKAWA
YASKAWA YRC1000micro Manuel utilisateur
YASKAWA
YASKAWA MP2300S Manuel utilisateur
YASKAWA
YASKAWA VS-626MT Series Manuel utilisateur
