Yamaha MCX-SP10 - Left / Right CH Speakers Manuel utilisateur

Speaker System

Systeme D’enceintes

MCX-SP10

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

01_Musiccast_speaker.p65 03.4.28, 2:55 PM1

English

PRECAUTIONS

•

To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

• Install the speaker in a cool, dry, clean place – away

from windows, heat sources, sources of excessive

vibration, dust, moisture and cold. Avoid sources of

humming (transformers, motors). To prevent fire or

electrical shock, do not expose the speaker to rain or

water.

• To prevent the enclosure from warping or discoloring,

do not place the speaker where it will be exposed to

direct sunlight or excessive humidity.

• Do not place the following objects on the speaker:

Glass, china, etc.

If glass etc. falls by vibrations and breaks, it may

cause personal injury.

A burning candle etc.

If the candle falls by vibrations, it may cause fire

and personal injury.

A vessel with water in it

If the vessel falls by vibrations and water spills, it

may cause damage to the speaker, and/or you may

get an electric shock.

• Do not place the speaker where foreign objects such as

water drips might fall. It might cause a fire, damage to

the speaker, and/or personal injury.

• Do not place the speaker where it is liable to be

knocked over or struck by falling objects. Stable

placement will also ensure better sound performance.

Read this before using the speaker.

Speaker cable (5 m) x 2

• Placing the speaker on the same shelf or rack as a

turntable can result in feedback.

• Never put a hand or a foreign object into the port

located on the rear of the speaker as this might cause

personal injury and/or damage to the speaker.

• When moving the speaker, do not hold the port as it

might cause personal injury and/or damage to the

speaker.

• Any time you note distortion, reduce the volume

control on your MCX-A10 to a lower setting. Never

allow your MCX-A10 to be driven into “clipping”.

Otherwise the speaker may be damaged.

• When using a component with a rated output power

higher than the nominal input power of the speaker,

care should be taken never to exceed the speaker’s

maximum input.

• Do not attempt to clean the speaker with chemical

solvents as this might damage the finish. Use a clean,

dry cloth.

• Do not attempt to modify or fix the speaker. Contact

qualifiedYAMAHA service personnel when any service

is needed. The cabinet should never be opened for any

reasons.

• Secure placement or installation is the owner’s

responsibility.

YAMAHA shall not be liable for any accident caused

by improper placement or installation of the speaker.

Stand x 2 Pad x 4

Screw set

• Screw (M3 x 10) x 4

SUPPLIED ACCESSORIES

After unpacking, check that the following parts are supplied.

02_Musiccast_speaker.p65 03.4.28, 2:55 PM3

2. Insert 2 self-tapping screws (diameter:

3.5 to 4 mm) into the wall, 40 mm apart.

3. Mount the speaker on the screws by

positioning it so that the screws on the

wall fit snugly into the holes on the

mounting bracket.

Cautions

• This speaker weighs 1.2 kg (2 lbs 10 oz). Do not mount it

on thin plywood or a wall with soft surface material. If

mounted, the screws may come loose from the flimsy

surface and the speaker may fall. This damages the speaker

and may cause personal injury.

• Do not use nails, adhesives, or other unstable materials to

mount the speakers. Long-term use and vibrations may

cause it to fall.

• To avoid accidents resulting from tripping over loose

speaker cable, fix it to the wall.

• This speaker features a magnetically shielded design, but

there is still a chance that placing it too close to a TV set

might impair picture color. Should this happen, move the

speaker away from the TV set.

■Using the supplied stands

Attach the speaker stands supplied to stand the

speakers on flat surfaces such as a table-top or

desk.

1. Insert the mounting pins on the lower

arm of the stand into the holes on the

bottom of the speaker.

2. Use a screwdriver to tighten the screws

on the upper arm of the stand, so the

speaker is tightly mounted.

■Mounting the speaker on a wall

Use the brackets on the rear of the speakers to

mount the speaker on a wall.

1. Attach the pads to the rear of the

speaker, as illustrated.

PLACING THE SPEAKERS

Mounting bracket

Pad

40mm

4mm 20mm or more

02_Musiccast_speaker.p65 03.4.28, 2:55 PM4

English

Before making connections, make sure that the MCX-A10 is switched off.

CONNECTING TO YOUR MCX-A10

■Connections

• Connect the push-type input terminals at the rear

of the speakers to the SPEAKER OUT terminals

of the MCX-A10 with the speaker cable provided.

• Connect the (+) terminals on the MCX-A10 and

the speakers using one side of the cable. Connect

the (–) terminals on both components using the

other side of the cable.

• Connect one speaker to the left (marked L)

terminals of your MCX-A10, and the other

speaker to the right (marked R) terminals, making

sure not to reverse the polarity (+, –). If one

speaker is connected with reversed polarity, the

sound will be unnatural and lack bass.

■How to connect

1. Press and hold the terminal’s tab.

2. Remove the insulation coating at the

extremity of each speaker cable by

twisting the coating off.

3. Insert the bare wire.

4. Release the tab to allow it to lock

securely on the cable’s wire end.

Cautions

• This speaker is specifically designed for use with the MCX-A10. If you connect it to any other component, take care not to

damage the speaker by exceeding its rated input.

• Do not let the bare speaker wires touch each other as this could damage the speaker or the MCX-A10, or both of them.

–

LAN

AUX IN

PREOUT

S.WOOFER

SPEAKER OUT

VIDEO OUT

+–+

DC IN 12V

–

SPEAKER OUT

+–+

MCX-SP10 MCX-SP10

(Left)(Right)

Black Red

MCX-A10

Gray line

02_Musiccast_speaker.p65 03.4.28, 2:55 PM5

SPECIFICATIONSREMOVING THE FRONT COVER

The front cover is fastened to the enclosure at four

points and can be removed if desired. To remove

the cover, hold on to both sides and slowly pull

straight away from the speaker. To reattach, line up

the four holes on the inner surface of the cover with

the four corresponding pegs on the speaker and

push gently.

Caution

• When the cover is removed, take care not to touch the

speaker units with your hands or to exert excessive force

with tools.

Type .................... 2-way bass reflex speaker system

Magnetic shielding type

Driver ................................. 10 cm (4”) cone woofer

2.5 cm (1”) dome tweeter

Impedance.......................................................... 4 Ω

Frequency Response .................... 100 Hz to 27 kHz

Nominal Input Power....................................... 20 W

Sensitivity ....................................... 89 dB/2.83 V/m

Dimensions (WxHxD) .............. 210 x 210 x 79 mm

(8-5/16” x 8-5/16” x 3-1/10”)

Weight.................................. 1.2 kg (2 lbs 10oz) x 2

• Specifications are subject to change without

notice due to product improvements.

• Care should be taken not to exceed the input

power values noted above.

02_Musiccast_speaker.p65 03.4.28, 2:55 PM6

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in China WB49070

02_Musiccast_speaker.p65 03.4.28, 2:55 PM16

Autres manuels pour MCX-SP10 - Left / Right CH Speakers

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Yamaha Système de haut-parleurs

Yamaha

Yamaha RDX-E700 Manuel utilisateur

Yamaha

Yamaha NS-120 Manuel utilisateur

Yamaha

Yamaha CHR Series Manuel utilisateur

Yamaha

Yamaha Electone HS-8 Manuel utilisateur

Yamaha

Yamaha ATS-1060 Manuel utilisateur

Yamaha

Yamaha NS-9595 Manuel utilisateur

Yamaha

Yamaha NS-B20 Manuel utilisateur

Yamaha

Yamaha NS225F - NS 255F Left Manuel utilisateur

Yamaha

Yamaha NS-M225 Manuel utilisateur

Yamaha

Yamaha NS-U30 Manuel utilisateur

Yamaha

Yamaha AX-10 Manuel utilisateur

Yamaha

Yamaha NS-AC143 Manuel utilisateur

Yamaha

Yamaha NS-6490 Manuel utilisateur

Yamaha

Yamaha SR-C20A Manuel utilisateur

Yamaha

Yamaha NS-PC5 Manuel utilisateur

Yamaha

Yamaha SR-C30A Manuel utilisateur

Yamaha

Yamaha SR-B40A Manuel utilisateur

Yamaha

Yamaha BR10 Guide de démarrage rapide

Yamaha

Yamaha NS C325 Manuel utilisateur

Yamaha

Yamaha ATS-2030 Manuel utilisateur

Yamaha

Yamaha NS-C5HX Manuel utilisateur

Yamaha

Yamaha YAS-209 Manuel utilisateur

Yamaha

Yamaha KMS-910 Manuel utilisateur

Yamaha

Yamaha YST-NC1 Manuel utilisateur

Manuels Système de haut-parleurs populaires d'autres marques

JVC

JVC CA-MXK5R Manuel utilisateur

LG NB4532B Manuel utilisateur

JVC

JVC CA-FSH100 Manuel utilisateur

5Core

5Core Pro Series Manuel utilisateur

EAW

EAW MQV1394e Manuel utilisateur

Lynx

Lynx GXR-LA10A Manuel utilisateur

iLive

iLive ITB066B Manuel utilisateur

RDX

RDX QuickStation 4 Manuel utilisateur

Electro-Voice

Electro-Voice S-122 Manuel utilisateur

Sven

Sven SPS-619 GOLD Manuel utilisateur

Pioneer

Pioneer CS-7070 Manuel utilisateur

EAW

EAW UB82e Manuel utilisateur

Sondpex

Sondpex Active Speaker System and Digital Music... Manuel utilisateur

JVC

JVC NX-PN7 Manuel utilisateur

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuel utilisateur

SE Audiotechnik

SE Audiotechnik I-LINE Manuel utilisateur

Gemini

Gemini WRX-843 Series Manuel utilisateur

TCL

TCL 6100 Series Manuel utilisateur