Xtreme Power Conversion P91c-1000 Mode d’emploi
P91c-1000 UPS
1000VA Model
User & Installaon Manual
www.xpcc.com | © 2021 Xtreme Power Conversion Corporaon. All rights reserved. (Rev 5/6/21)
Xtreme Power Conversion Corporaon
P91c-1000 User’s Manual
Page 2
Uninterrupble Power Supply
Table of Contents
Important Safety Warning...........................................................................3
Transportaon.................................................................................................................................3
Preparaon......................................................................................................................................3
Installaon........................................................................................................................................3
Operaon.........................................................................................................................................3
Maintenance, service and faults.......................................................................................................4
Installaon and setup...................................................................................5
Rear panel view...............................................................................................................................5
Setup the UPS..................................................................................................................................6
Operaons...................................................................................................8
Buon operaon.............................................................................................................................8
LED panel.........................................................................................................................................9
Troubleshoong........................................................................................10
Storage and Maintenace.............................................................................11
Specicaons..............................................................................................12
ObtainingService........................................................................................13
Xtreme Power Conversion Limited Warranty...............................................14
Xtreme Power Conversion Load Protecon Policy........................................15
Xtreme Power Conversion Corporaon
P91c-1000 User’s Manual
Page 3
Uninterrupble Power Supply
Important Safety Warning
Save this manual properly and read carefully the following instrucons before installing the unit. Please strictly
comply with all warnings and operang instrucons in this manual strictly. Do not operate this unit before read-
ing through all safety informaon and operang instrucons carefully.
Transportaon
Please transport the UPS system only in the original package to protect against shock and
impact.
Preparaon
• Condensaon may occur if the UPS system is moved directly from cold to warm environments. The UPS
system must be absolutely dry before being installed. Please allow at least two hours for the UPS system
to acclimate to the environment.
• Do not install the UPS system near water or in moist environments.
• Do not install the UPS system where it would be exposed to direct sunlight or near a heater.
• Do not block venlaon holes in the UPS housing.
=
Installaon & Setup
• Do not connect appliances or devices which would overload the UPS system (e.g. laser printers)
to the UPS output receptacles.
• Place cords in such a way that no one can step on or trip over them.
• Do not connect domesc appliances such as hair dryers to UPS output receptacles.
• The UPS can be operated by any individuals with no previous experience.
• Connect the UPS system only to a grounded shockproof outlet which must be easily accessible
and close to the UPS system.
• When installing the equipment, it should ensure that the sum of the leakage current of the UPS
and the connected devices does not exceed 3.5mA.
Operaon
• Do not disconnect the mains power cord on the UPS system or the building wiring outlet (shockproof
socket outlet) during operaons since this would cancel the protecve earthing of the UPS system and
of all connected loads.
• The UPS system features its own internal current source (baeries). The UPS output receptacles or
output may be electrically live even if the UPS system is not connected to the building wiring outlet.
• Prevent uids or other foreign objects from geng inside the UPS system.
Xtreme Power Conversion Corporaon
P91c-1000 User’s Manual
Page 4
Uninterrupble Power Supply
Maintenance, service and faults
• The UPS system operates with hazardous voltages. Repairs may be carried out only by qualied
maintenance personnel.
• Cauon -risk of electric shock. Even aer the unit is disconnected from the mains (building wiring
outlet), components inside the UPS system are sll connected to the baery and electrically live
and dangerous.
• Before carrying out any kind of service or maintenance, disconnect the baeries and verify that
no current is present and no hazardous voltage exists in the terminals of high capability
capacitor such as BUS-capacitors.
• Only people that are adequately familiar with baeries and with the required precauonary mea-
sures may replace baeries and supervise operaons. Unauthorized personnel must be kept
well away from the baeries.
• Cauon -risk of electric shock. The baery circuit is not isolated from the input voltage.
• Hazardous voltages may occur between the baery terminals and the ground. Before touching,
please verify that no voltage is present!
• Baeries may cause electric shock and have a high short-circuit current. Please take the precauon-
ary measures specied below and any other measures necessary when working with
baeries:
a) Remove wristwatches, rings and other metal objects
b) Use only tools with insulated grips and handles.
c) Wear rubber gloves and boots.
d) Do not lay tools or metal parts on top of baeries.
e) Disconnect charging source and load prior to installing or maintaining the baery.
• When changing baeries, install the same number and same type of baeries.
• Do not aempt to dispose of baeries by burning them. This could cause baery explosion.
• Do not open or destroy baeries. Escaping electrolyte can cause injury to the skin and eyes. It
may be toxic.
• Please replace the fuse only with the same type and amperage in order to avoid re hazards.
• Do not dismantle the UPS system.
• NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protecon against harmful interference when the equipment is operated in acommercial environ-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instrucon manual, may cause harmful interference to radio com-
municaons. Operaon of this equipment in a residenal area is likely to cause harmful interfer-
ence in which case the user will be required to correct the interference at his own expense.
• WARNING: Changes or modicaons not expressly approved by the party responsible for compli-
ance could void the user’s authority to operate the equipment.
Setup the UPS
Step 1: UPS input connecon
Plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using extension cords. The
power cord is aached to the UPS. The input plug is a NEMA 5-15P.
Step 2: UPS output connecon
There are two kinds of output receptacles: programmable outlets and general outlet. Please connect
non-crical devices to the programmable outlets and crical devices to the general outlets. During
power failure, you may extend the backup me to crical devices by seng shorter backup me for
non-crical devices.
Xtreme Power Conversion Corporaon
P91c-1000 User’s Manual
Page 5
Uninterrupble Power Supply
Installaon and setup
NOTE: Before installaon, please inspect the unit. Be sure that nothing inside the package is damaged.
Please keep the original package in a safe place for future use.
Rear panel view
1KL
1 AC input power cord
2 Output receptacle: connect to mission-crical loads.
3 Programmable outlets: connect to non-crical loads
4 USB serial communicaon port
5 ROO/RPO funcon connector
6 Intelligent slot
Xtreme Power Conversion Corporaon
P91c-1000 User’s Manual
Page 6
Uninterrupble Power Supply
Step 3: Communicaon connecon
Communicaon port:
USB port RS-232 port
To allow for unaended UPS shutdown/start-up and status monitoring, connect the communicaon
cable one end to the USB port and the other to the communicaon port of your PC. With the
monitoring soware installed, you can schedule UPS shutdown/start-up and monitor UPS status
through PC.
The UPS is equipped with intelligent slot perfect for Relay and Modbus card. When installing with
SNMP card in the UPS, it will provide advanced communicaon and monitoring opons.
Xtreme Power Conversion Corporaon
P91c-1000 User’s Manual
Page 7
Uninterrupble Power Supply
Step 4: Disable/Enable ROO/RPO funcon
Step 5: Turn on/o the UPS
Press the ON/OFF buon on the front panel for two seconds to power on the UPS.
Step 6: Install soware
For opmal computer system protecon, install UPS monitoring soware to fully congure UPS shut-
down. You may insert provided CD into CD-ROM to install the monitoring soware. If not, please follow
steps below to download and install monitoring soware from the internet:
1. Go to the website hp://www.power-soware-download.com
2. Click ViewPower soware icon and then choose your required OS to download the soware.
3. Follow the on-screen instrucons to install the soware.
4. When your computer restarts, the monitoring soware will appear as an orange plug icon located in
the system tray, near the clock.
Contact open: UPS shuts down.
Contact closed: UPS start-up (UPS is connected to
AC power and AC power is available).
Note: The local ON/OFF control by pressing On/O
buon overrides the remote-control funcon.
Contact open: UPS shuts down and Fault LED (3)
will be ON.
To return to normal operaon, de-acvate exter-
nal remote contact (Fault LED (3) will be OFF) and
restart.
Xtreme Power Conversion Corporaon
P91c-1000 User’s Manual
Page 8
Uninterrupble Power Supply
Operaons
Buon operaon
1K View:
Buon Funcon
ON/OFF Buon • Turn on the UPS: Press and hold buon for at least 2 seconds to turn on
the UPS.
• Turn o the UPS: Press and hold this buon at least 2 seconds to turn o
the UPS. UPS will be in standby mode when ulity power is normal or
transfer to bypass mode if bypass mode is enabled via soware.
1KL View:
Buon Funcon
On/Mute Buon • Turn on the UPS: Press and hold ON/Mute buon for at least 2 seconds
to turn on the UPS.
• Mute the alarm: When the UPS is on baery mode, press and hold this
buon for at least 5 seconds to disable or enable the alarm system. But
it’s not applied to the situaons when warnings or errors occur.
O/Enter Buon • Turn o the UPS: Press and hold this buon at least 2 seconds to turn
o the UPS in baery mode. UPS will be in standby mode under power
normal or transfer to Bypass mode if the Bypass enable seng by press-
ing this buon.
LED indicators On/O buon
Xtreme Power Conversion Corporaon
P91c-1000 User’s Manual
Page 9
Uninterrupble Power Supply
3-2. LED Indicators
1K View:
UPS Status LED Color On/Flashing
Line Mode LED1 Green On
LED4 to LED7 indicate load
level during line mode.
LED4: > 75% load level
LED5: 50% ~ 75% load level
LED6: 25% ~ 50% load level
LED7: 0% ~25% load level
Green On
Baery Mode LED2 Yellow Flashing
LED4 to LED7 indicate baery
capacity during baery mode.
LED4: baery voltage > 26V
LED5: baery voltage > 24.5V
LED6: baery voltage > 23V
LED7: baery voltage > 21V
Green On
Low baery LED7 Green On
LED3 Red On
Baery replacement LED3 Red Flashing
Fault LED3 Red On
On/o status of out-
put receptacles
LED 8: indicang on/o status
of general output receptacles
(2)
LED 9: indicang on/o status
of programmable outlet (3)
Green On
Xtreme Power Conversion Corporaon
P91c-1000 User’s Manual
Page 10
Uninterrupble Power Supply
1KL View:
Audible Alarm
Baery Mode Sounding every 4 seconds
Low Baery Sounding every second
Overload Sounding twice every second
Fault Connuously sounding
Bypass Mode Sounding every 10 seconds
Troubleshoong
If the UPS system does not operate correctly, please solve the problem by using the table
below.
Symptom Possible cause Remedy
No indicaon and alarm even
though the mains is normal.
The AC input power is not
connected.
Ensure if input power cord is
rmly connected to the mains.
The AC input is connected to
the UPS output.
Plug AC input power cord to AC
input correctly.
The mains is normal but red LED
is ashing. The alarm is sounding
every second.
The internal baery connecon
is wrong.
Please re-connect baery wires
with correct polarity.
The alarm is sounding twice every
second and red LED is ashing.
UPS is overloaded Remove excess loads from UPS
output.
Aer repeve overloads, the
UPS is locked in the Bypass
mode. Connected devices are
fed directly by the mains.
Remove excess loads from UPS
output rst. Then, shut down
the UPS and restart it.
The mains is normal. But the unit is
on baery mode.
Baery is not fully charged. Please charge baery at least
5 hours. If baery is sll in low
baery level, please contact
local dealer.
Baery defect. Replace the baery with the
same type of baery.
Red LED is on and alarm is sound-
ing connuously.
UPS fault. Please contact local dealer
directly.
UPS Status Indicators
AC Mode Green LED lighng.
Baery Mode Yellow LED ashing.
Fault Red LED lighng.
O-mode charging. Green LED ashing.
Three indicators to display UPS status:
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Xtreme Power Conversion UPS
Xtreme Power Conversion
Xtreme Power Conversion TX90-1000 Mode d’emploi
Xtreme Power Conversion
Xtreme Power Conversion 1000VA Mode d’emploi
Xtreme Power Conversion
Xtreme Power Conversion 20kVA Model Manuel d'utilisation
Xtreme Power Conversion
Xtreme Power Conversion M90S Series Manuel utilisateur
Xtreme Power Conversion
Xtreme Power Conversion M90U Mode d’emploi
Xtreme Power Conversion
Xtreme Power Conversion P90 1000VA Mode d’emploi
Xtreme Power Conversion
Xtreme Power Conversion S70 Line?Interactive Mode d’emploi
Xtreme Power Conversion
Xtreme Power Conversion A60 Standby Mode d’emploi
Xtreme Power Conversion
Xtreme Power Conversion A60-550 Mode d’emploi
Xtreme Power Conversion
Xtreme Power Conversion XVT 600VA Mode d’emploi
Xtreme Power Conversion
Xtreme Power Conversion M90 Manuel utilisateur
Xtreme Power Conversion
Xtreme Power Conversion P90g Series Mode d’emploi
Xtreme Power Conversion
Xtreme Power Conversion XPRT-6kVA Mode d’emploi
Xtreme Power Conversion
Xtreme Power Conversion NXRi-6KL Mode d’emploi
Xtreme Power Conversion
Xtreme Power Conversion XVT 600VA Mode d’emploi
Xtreme Power Conversion
Xtreme Power Conversion XVT 600VA Manuel utilisateur
Xtreme Power Conversion
Xtreme Power Conversion 3000 VA P80 Series Mode d’emploi
Xtreme Power Conversion
Xtreme Power Conversion XPRT?1000 Manuel d'utilisation
Xtreme Power Conversion
Xtreme Power Conversion M90 Mode d’emploi
Xtreme Power Conversion
Xtreme Power Conversion E90 Series Manuel utilisateur
Manuels UPS populaires d'autres marques
Pylontech
Pylontech Victron & Pylontech US5000 Manuel utilisateur
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur
Mecer
Mecer ME-1000-WTU Manuel utilisateur
Mustek
Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation
Emerson
Emerson Liebert NXL series Manuel utilisateur
MAKELSAN
MAKELSAN BOXER SERIES Manuel utilisateur
