Xilica Audio Design XD Series Manuel utilisateur

XDSeries

LoudspeakerManagementSystem

UserManual

XILICA Audio Design

XD Series User's manual – Page 2

Important Safety Instructions

1. READ THESE INSTRUCTIONS

All the safety and operating instructions should be read before the product is operated.

2. KEEP THESE INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED ALL WARNINGS

All warnings on the product and in the operating instructions should be adhered to.

4. FOLLOW ALL INSTRUCTIONS

All operating and use of instructions should be followed.

5. DO NOT USE THIS APPARATUS NEAR WATER

Do not use the product near water. For example, near a bathtub, washbowl, kitchen sink,

or laundry tub, in a wet basement, or near a swimming pool, and the like.

6. CLEAN ONLY WITH DRY CLOTH

Unplug the unit from the wall outlet before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for cleaning.

7. DO NOT BLOCK ANY VENTILATION OPENINGS

Slots and openings in the cabinet back or bottom are provided for ventilation, to ensure

reliable operation of the limit and to protect it from overheating. These openings must

not be blocked or covered. The openings should never be blocked by placing the product

on a bed, sofa, rug, or similar surface. This product should never be placed near or over

a radiator or heat source. This product should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is provided or the manufacture's

instructions have been adhered to.

8. DO NOT INSTALL NEAR ANY HEAT SOURCES

XD Series User's manual – Page 3

This Product should be situated away from heat sources such as radiators, stoves, or

other products (including amplifiers) that produces heat.

9. DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED OR GROUNDING-TYPE

PLUG

A Polarized plug has two blades with one wider than the other. A grounding-type plug

has two blades and a third grounding prong. The wide blade or the third prongs are

provided for your safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. PROTECT THE POWER CORD FROM BEING WALKED ON OR PINCHED

PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE

THEY EXIT FROM THE APPARATUS.

11. ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE MANUFACTURER.

12. USE ONLY WITH CART, STAND, TRIPOD, BRACKET, OR TABLE SPECIFIED BY THE

MANUFACTURER, OR SOLD WITH THE APPARATUS. WHEN A CART IS USED, USE

CAUTION WHEN MOVING THE CART/APPARATUS TO AVOID INJURY FROM TIP-OVER.

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may

fall, causing serious injury to someone, and serious damage to the appliance. A unit and

cart combination should be moved with care. Quick stops, excessive force, and uneven

surfaces may cause the product and cart combination to overturn.

13. UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR

LONG PERIODS OF TIME.

For added protection for this unit during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the wall outlet and disconnect the

antenna or cable system. This will prevent damage to the unit due to lightning and power

line surges.

14. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL. SERVICING IS

REQUIRED WHEN THE APPARATUS HAS BEEN DAMAGED IN ANYWAY, SUCH AS

WHEN THE POWER SUPPLY CORD OR PLUG IS DAMAGED, LIQUID HAS BEEN SPILLED

OR OBJECTS HAVE FALLEN INTO THE APPARATUS, THE APPARATUS HAS BEEN

EXPOSED TO RAIN OR MOISTURE, DOES NOT OPERATE NORMALLY, OR HAS BEEN

FROPPED.

15. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPARATUS TO RAIN OR MOISTURE.

16. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO

OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE

APPARATUS.

XD Series User's manual – Page 4

Table of Contents

Important Safety Instructions................................................2

Table of Contents ...................................................................4

1.0 Introduction....................................................................5

2.0 Features..........................................................................6

3.0 Front Panel Functions...................................................7

4.0 Rear Panel Functions ....................................................9

5.0 Powering Up the Device..............................................11

6.0 Operating the Channel Menus....................................12

7.0 Operating the System Menus .....................................19

8.0 Quick Reference...........................................................27

9.0 PC Control Software....................................................28

10.0 Specifications...............................................................29

11.0 Warranty........................................................................31

XD Series User's manual – Page 5

1.0 Introduction

The XD series is a digital loudspeaker management system designed for

the touring or fixed sound installation markets. The absolute latest in

available technology is utilized with 40-bit floating point processors and

high performance 24-bit Analog Converters. The high-bit DSP prevents

noise and distortion induced by truncation errors of the commonly used 24-

bit fixed-point devices. A complete set of parameters include I/O levels,

delay, polarity, 8 bands of EQ per channel, 31 bands of GEQ per input,

multiple crossover selections including FIR linear phase filters and full

function limiters. Precise frequency control is achieved with its 1 Hz

resolution. Inputs and outputs can be routed in multiple configurations to

meet any requirement. The XD Series can be controlled or configured in

real time on the front panel or with the intuitive PC GUI accessed via the

RS-232, USB or Ethernet interface. Software upgrade for CPU and DSP

via PC keeps the device current with newly developed algorithms and

functions once available. Multiple setup storage and system security

complete this professional package.

Shipped contents:

- XD unit

- User Manual

- XConsole Software

- Power cord

XD Series User's manual – Page 6

2.0 Features

> Up to 8 Inputs and 8 Outputs with flexible routing

> 40-bit floating point DSP

> 96kHz Sampling Rate

> High Performance 24-bit A/D Converters

> 1 Hz Frequency Resolution

> 8 Equalizers (Magnitude or Phase) for each Input and Output

> 31 Bands GEQ for each Input

> Multiple Crossover types including FIR linear phase filters

> Full Function Limiters

> Precise Level, Polarity and Delay

> Digital (AES-EBU) or Analog Inputs and Outputs

> CPU and DSP upgrade via PC

> Individual Channel Buttons with Linking capability

> 4-Line x 26 Character Backlit LCD Display

> Full 5-segment LED’s on every Input and Output

> Storage of up to 30 Preset Setups

> Security Lock for Individual Menu

> RS-232, USB and Ethernet Interface for PC Configuration

> Mic Preamps + Phantom Power for each Input Channel1

1For XD-4080M and XD-8080M only.

XD Series User's manual – Page 7

3.0 Front Panel Functions

1. USB – a standard Type B USB connector. Device driver from the

provided software CD must be installed prior to usage.

2. RS232 – a standard female DB9 socket. A straight through cable is

required for PC connection.

3. Mute Buttons – Mute or un-mute input and output channels. When an

input channel is muted, a red LED will come on for indication.

4. Channel Menu Buttons – Selects the corresponding channel for the

LCD menu display and is acknowledged by a green LED. The last

modified menu will be displayed on the LCD. Linking multiple channels

is accomplished by pressing and holding the first channel key, then

pushing the other desired channels. This eases programming for same

parameters across multiple channels. Multiple Inputs can be linked

together and multiple outputs can be linked together. Inputs and Outputs

are linked separately.

5. Peak Level LED – Indicates the current peak level of the Signal:

Signal, -12dB, -6dB, -3dB, Over/Limit. The Input Limit LED references

to the device's maximum headroom. The Output Limit LED references

to the threshold of the output limiter.

6. LCD –Shows all the necessary information to control the unit.

3 65

7 84

XD Series User's manual – Page 8

7. Menu Buttons – There are 6 menu keys: <<Menu (Menu Down),

Menu>> (Menu Up), <<Cursor (Cursor Down), Cursor>> (Cursor Up),

Enter and Exit. The functions of each key is explained below:

<<Menu: Go to previous menu screen.

Menu>>: Go to next menu screen.

<<Cursor: Go to previous cursor in the menu screen.

Cursor>>: Go to next cursor in the menu Screen.

Enter: Enter enters the System Menu from the main

menu and is used in the System Menu to proceed

with selected actions.

Exit: Exit to the Main Menu.

8. Rotary Thumb Wheel – Changes parameter data values. The wheel

has travel velocity sensing which ease large incremental data

modifications. For modifying delay and frequency (1 Hz resolution),

pressing the Enter key simultaneously will increment/decrement the

data value by 100X.

XD Series User's manual – Page 9

4.0 Rear Panel Functions

1. Main Power – Connects via a standard IEC socket. A compatible power

cord is supplied with the unit. The voltage input is 90-240VAC, 50-60Hz.

2. Main Fuse – T2.5A-250V. Slow blow type.

3. Power switch - Controls power On/Off.

4. Ethernet – RJ45 connector for Ethernet control. The device should be

connected to a router/switch/hub via a straight through CAT-5 cable.

5. Analog Inputs and Outputs - Separate 3-pin connectors2are provided

for each audio input and output. The device's output stage employs the

balanced impedance topology. All I/O connectors have pin 1 as ground

(shield), pin 2 as + and pin 3 as -.

2XLR connectors for XD-4080, Euro Connectors for XD-8080

1,2,3

XD Series User's manual – Page 10

6. AES-EBU Inputs and Outputs – Standard DB25 female connector3

Pin Description Revision A Revision B

(Yamaha Standard)

Input 1 + 14 1

Input 1 - 2 14

Input 2 + 3 2

Input 2 - 16 15

Input 3 + 3

Input 3 - 16

Input 4 + 4

Input 4 - 17

Output 1+ 5

Output 1 - 8 18

Output 2 + 9 6

Output 2 - 22 19

Output 3 + 23 7

Output 3 - 11 20

Output 4 + 12 8

Output 4 - 25 21

Ground 1 4 7 10 13 15 18 21 24 10 11 12 13 22 23 24 25

No Connect 9

3Revision A or B can be found when powering on the unit, it is appended to the version number.

Table des matières

Autres manuels Xilica Audio Design Système de contrôle

Xilica Audio Design

Xilica Audio Design XPanelTouch Manuel utilisateur

Manuels Système de contrôle populaires d'autres marques

Pentair Pool Products

Pentair Pool Products Compool Manuel utilisateur

ComfortNET

ComfortNET CTK04 Manuel utilisateur

Fireye

Fireye InSight II 95DSS3 Manuel utilisateur

CAME

CAME G3000 Manuel utilisateur

Idemia

Idemia MorphoAccess VP MD Manuel utilisateur

Axis

Axis P1445-LE-3 Manuel utilisateur

HEIDENHAIN

HEIDENHAIN TNC 150 B Manuel utilisateur

CNC-Step

CNC-Step High-Z T-Series Manuel utilisateur

Doosan

Doosan DVF Series Manuel utilisateur

Honeywell

Honeywell KAP 140 Manuel utilisateur

Honeywell

Honeywell vk41 series Manuel utilisateur

AirBench

AirBench FPW Guide d'installation

Cypress

Cypress HHR-3160 Manuel utilisateur

CAME

CAME GLT40AOS Manuel utilisateur

Zonex

Zonex GEN II -VVT Guide de l'utilisateur

Altronics

Altronics K 9650 Manuel utilisateur

micro-trak

micro-trak RoadMaster Manuel utilisateur

micro-trak

micro-trak Calc-An-Acre II Manuel utilisateur