xG Technology CN3200 Manuel utilisateur
G7603 - Release 2.0
2
Dual Band Routing Modem - Quick Start Guide - G7603 - Release 2.0
Product features and specifications are subject to change without prior notice.
xG® and xMax® are registered trademarks of xG Technology, Inc.
All other trademarks used herein are property of their respective owners.
For the latest product documentation and software
updates, please refer to our Web site at
www.xGTechnology.com/support
xG Technology, Inc.
240 South Pineapple Avenue, Suite 701
Sarasota, FL 34236
(941) 953-9035
www.xGTechnology.com
3
Dual Band Routing Modem - Quick Start Guide - G7603 - Release 2.0
Table of Contents
Introduction ...............................................................................................................5
About this Product....................................................................................................................5
About this Book ........................................................................................................................5
Hardware Overview..................................................................................................................5
Powering the CN3200 Modem .................................................................................................6
Important Safety and Installation Notices...................................................................7
FCC Part 15 Requirement .........................................................................................................7
Hazard.......................................................................................................................................7
FCC Compliance ........................................................................................................................7
RF Exposure ..............................................................................................................................8
Connecting the CN3200 Dual Band Routing Modem to the xMax Network .................9
Connecting Wireless Devices to the xMax Network ..................................................10
Wired Internet Connectivity and Setting Up a WiFi Hotspot......................................11
Wired Internet Connectivity...................................................................................................11
Technical Specifications ............................................................................................12
Warranty ..................................................................................................................13
Limited Warranty....................................................................................................................13
SCOPE OF THE WARRANTY.............................................................................................................. 13
ADDITIONAL PROVISIONS OF THE WARRANTY ............................................................................... 14
OBTAINING SERVICE AND SUPPORT UNDER WARRANTY............................................................... 15
EXCLUSIVITY OF THE WARRANTY.................................................................................................... 15
4
Dual Band Routing Modem - Quick Start Guide - G7603 - Release 2.0
THIS PAGE INTENTIONALLY LEFT BLANK
5
Dual Band Routing Modem - Quick Start Guide - G7603 - Release 2.0
The CN3200 Dual Band Routing Modem is a ruggedized subscriber device. It is waterproof and made
to handle wide temperature ranges. While primarily designed for use in fixed locations, it may also be
used in vehicular applications. It enables any Internet-ready device to connect to the xMax network,
when paired with a WiFi access point either wirelessly or through a wired Ethernet connection.
This manual provides basic instructions for installation and configuration of the CN3200 Modem. It
also describes how to connect to the xMax Network and then connect Internet-enabled wireless
devices to the xMax Network.
The CN3200 Dual Band Routing Modem is a self-contained IEEE 802.11b/g access point which
provides any device connected to its Ethernet port access to the xMAX network. When paired with a
WiFi hotspot it provides access to the xMAX network to WiFi enabled devices. The CN3200 Modem is
totally protected against dust and moisture.
IMPORTANT: The CN3200 is professionally installed.
6
Dual Band Routing Modem - Quick Start Guide - G7603 - Release 2.0
The CN3200 Modem is a Power-over-Ethernet (PoE+) device.
The IEEE 802.3at PoE+ standard enables transmission of both data and the power to operate a
device over a single Cat5/5e/6 cable connection.
The CN3200 Modem REQUIRES a PoE++ adaptor, as supplied.
The device will NOT operate with a low-power PoE switch or adaptor.
IMPORTANT: BEFORE YOU CONTINUE
Antennas or dummy loads MUST be connected to the two top Tx RF ports.
Both Tx RF ports MUST be properly terminated
before power is applied to the unit.
Applying power without proper RF port
termination might damage the unit
and void the product warranty.
7
Dual Band Routing Modem - Quick Start Guide - G7603 - Release 2.0
These notices apply to the CN3200 Dual Band Routing Modem.
Be sure to read, understand and follow these instructions.
Heed all warnings.
Only use accessories and attachments specified by xG Technology.
Keep a copy of these instructions for future reference.
The CN1300 xMax 2.4 GHz Access Point MUST only be installed by a professional installer. It is the
responsibility of the installer to adjust the transmit power level to ensure that the output power plus
antenna gain does not cause the device to exceed FCC Part 15 output power regulations.
ous situation, which if not avoided,
could result in death or serious injury.
All antennas MUST either be located on the exterior of a vehicle or mounted on a pole.
Every antenna MUST be separated from users by more than 25 cm (0.82 ft) at all times.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio technician for help.
8
Dual Band Routing Modem - Quick Start Guide - G7603 - Release 2.0
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance of
25 cm (0.82 ft) between the radiator and your body. This transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter.
Changes or modifications to this device not expressly approved
by xG Technology could void the user’s authority to operate
the equipment and void the product warranty.
9
Dual Band Routing Modem - Quick Start Guide - G7603 - Release 2.0
IMPORTANT
Before you begin this step, it is assumed that the CN3200 Dual Band Routing Modem has been
configured as described in the CN3200 Dual Band Routing Modem Installation Guide. This was
completed by the device installer.
These steps connect the CN3200 Modem to an xMax network.
1. Connect the PoE++ Power Supply power cable to a 110 to 240 VAC power source.
2. If the CN3200 Modem is within range of an xMax Network, it connects within 2 minutes.
3. The CN3200 Dual Band Routing Modem is now fully functional.
NOTES
If the CN3200 Modem fails to connect to an xMax network after two minutes have elapsed,
ensure that the power indicator on the Power Supply is glowing GREEN.
If the CN3200 Modem is within range of an operating xMax Network, but not connecting,
follow these steps to restart the CN3200 Modem:
Power off the CN3200 Modem by disconnecting the AC cord from the Power Supply.
Wait 60 seconds.
Reconnect the AC cord to power on the CN3200 Modem.
If the CN3200 Dual Band Modem still does not connect to the xMax Network, call the service
provider to report your problem.
10
Dual Band Routing Modem - Quick Start Guide - G7603 - Release 2.0
When within range of a WiFi router connected to the CN3200 Dual Band Routing Modem, any
Internet-ready device has the ability to securely connect to the Internet through the xMax Network.
These steps connect WiFi devices to the xMax Network.
1. Configure a WiFi-enabled device for Internet Protocol Version 4 (TCP/IPv4) and DHCP operation.
2. Enter the SSID and password to match that of the user-supplied WiFi router that is connected to
the CN3200. This information should have been provided by the installer.
Once connected, the device can be used for any common Internet function.
Autres manuels pour CN3200
1
Table des matières
Autres manuels xG Technology Routeur réseau
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité