Xerox XES 8855 Manuel utilisateur

XES 8855 Printer

User Guide

701P92414 November 2000

EMC Notices

Australia/New Zealand

Changes or modifications to this equipment not specifically approved by Fuji

Xerox Australia Pty. Limited may void the user’s authority to operate this

equipment.

Shielded cables must be used with this equipment to maintain compliance with

the Radiocommunications Act 1992.

European Union

WARNING

This is a Class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

Changes or modifications to this equipment not specifically approved by Xerox

Europe may void the user’s authority to operate this equipment.

Shielded cables must be used with this equipment to maintain compliance with

the EMC Directive (89/336/EEC).

WARNING

In order to allow this equipment to operate in proximity to Industrial,

Scientific and Medical (ISM) equipment, the external radiation from ISM

equipment may have to be limited or special mitigation measures taken.

Canada

This Class "A" digital apparatus complies with Canadian ICES-0003.

Cet appareil numérique de la classe "A" est conforme à la norme NMB-003 du

Canada.

EMC Notices (continued)

Japan

This is a Class A product based on the standard of the Voluntary Control

Council for Interference by Information Technology Equipment (VCCI). If this

equipment is used in a domestic environment, radio disturbance may arise.

When such trouble occurs, the user may be required to take corrective

actions.

Changes or modifications to this equipment not specifically approved by Fuji

Xerox Limited may void the user’s authority to operate this equipment.

Shielded cables must be used with this equipment to maintain compliance with

the Voluntary Control Council for Interference by Information Technology

Equipment regulations.

USA

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

Changes or modifications to this equipment not specifically approved by the

Xerox Corporation may void the user’s authority to operate this equipment.

Shielded cables must be used with this equipment to maintain compliance with

FCC regulations.

Trademark Acknowledgments

XEROX®, 8825, XES Synergix 8825 Digital Solution, 8830, XES Synergix

8830 Digital Solution, 8855, XES Synergix 8855 Digital Solution, Synergix

Scan Digital Solution, the digital box icon, AccXES, and acronym, XES are

trademarks of XEROX CORPORATION.

Internet Explorer is a copyright protected program of Microsoft Corporation.

Netscape is a registered trademark of Netscape Communications Corporation.

Safety Notes

Your XES Synergix 8825/8830/8855 Digital Solution has been designed and

tested to meet strict safety requirements. These include safety agency

examination and approval plus compliance with established environmental

standards.

Please read the following instructions carefully before operating the XES

Synergix 8825/8830/8855 Digital Solution and refer to them as needed to

ensure continued safe operation.

Follow all warnings and instructions marked on or supplied with the product.

Unplug the units from the wall outlet before cleaning the exterior. Always use

materials specifically designated for the XES Synergix 8825/8830/8855 Digital

Solution. Use of other materials may result in poor performance and could

create a hazardous situation.

Do not use aerosol cleaners. Follow the instructions in this operator manual

for the proper cleaning methods.

Never use supplies or cleaning materials for purposes other than what they

were intended. Keep all supplies and materials out of the reach of children.

Do not use the units near water, wet locations, or outdoors.

The components of this product are equipped with a three-wire, grounding-

type plug (i.e., a plug having a grounding pin). This plug will only fit into a

grounding-type power outlet. This is a safety feature. To avoid the risk of

electric shock, contact your electrician to replace the receptacle if you are

unable to insert the plug into the outlet.

Never use a ground adapter plug to connect the system to a power source that

lacks a ground connection terminal.

This system should be operated from the type of power source indicated on

the marking label. If you are not sure of the type of power available, consult

your local power company.

The power supply cord is the disconnect device for this equipment. Make sure

that the installation is near the socket outlet and is easily accessible.

Do not allow anything to rest on the power cord. Do not locate the units where

someone will step on the cord.

Safety notes (continued)

The units should not be placed in a built-in installation unless proper ventilation

is provided.

Never push objects of any kind into the slots of the units as they may touch

dangerous voltage points or short out parts that could result in a risk of fire or

electric shock.

Never spill liquid of any kind on the units.

Never remove any covers or guards that require a tool for removal. There are

no operator serviceable areas within these covers.

Never attempt any maintenance function that is not specified in this operator

manual.

Never defeat interlock switches. Machines are designed to prevent operator

access to unsafe areas. Covers, guards, and interlock switches are provided

to ensure that the system will not operate with the covers opened.

Unplug the reprographic system from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

When the power cord is damaged or frayed.

If liquid has been spilled into the product.

If the units have been exposed to rain or water.

If the units are producing unusual noises or odors.

If the units or the cabinets have been damaged.

If you need additional safety information concerning the XES Synergix

8825/8830/8855 or XES supplied materials, you may call:

Within the United States:

1-800-828-6571 toll free.

In other countries:

Please call your local Xerox Engineering Digital Solutions service office for

help.

Local Phone Number______________________________________

Table of Contents

TABLE OF CONTENTS

SAFETY NOTES................................................................. 2

PRINTER OVERVIEW........................................................ 5

Front View........................................................................ 5

Rear View......................................................................... 6

Right Side View................................................................ 7

MEDIA INFORMATION....................................................... 9

Loading the Media - Rolls 1, 2, 3 ..................................... 9

Loading the Media - Roll 4............................................ 11

Making a Test Print........................................................ 13

Dehumidifier................................................................... 14

MANUAL BYPASS FEED................................................. 15

PROBLEM SOLVING........................................................ 17

Status Indicators ............................................................ 17

Error Codes.................................................................... 18

CLEARING THE MEDIA PATH.........................................21

Media Jams J-01, J-02...................................................21

Media Jam J-03..............................................................22

Media Jam J-04..............................................................23

Media Jam J-05..............................................................24

Media Jam J-11..............................................................25

Media Jams J-12, J-13...................................................26

Media Jam J-14..............................................................27

CARE.................................................................................29

Replacing the Toner Cartridge........................................29

Replacing the Toner Waste Container ...........................31

Replacing the Oil Pads...................................................32

Cleaning the Upper Corotron..........................................33

Cleaning the Lower Corotron..........................................34

PRODUCT SPECIFICATIONS..........................................35

SAFETY NOTES

Your XES 8855 Engineering Printer has been designed and

tested to meet strict safety requirements. These include safety

agency examination and approval and compliance to

established environmental standards.

Please read the following instructions carefully before operating

the XES 8855 Engineering Printer and refer to them as needed

to ensure the continued safe operation of the product.

Follow all warnings and instructions marked on or supplied with

the product.

Unplug the printer from the wall outlet before cleaning the

exterior. Always use materials specifically designated for the

XES 8855 Engineering Printer. Use of other materials may

result in poor performance and could create a hazardous

situation.

Do not use aerosol cleaners. Follow the instructions in this

operator manual for the proper cleaning methods.

Never use supplies or cleaning materials for purposes other

than what they were intended. Keep all supplies and materials

out of the reach of children.

Do not use this product near water, wet locations, or outdoors.

This product is equipped with a three-wire, grounding-type plug

(i.e., a plug having a grounding pin). This plug will only fit into a

grounding-type power outlet. This is a safety feature. To avoid

the risk of electric shock, contact your electrician to replace the

receptacle if you are unable to insert the plug into the outlet.

Never use a ground adapter plug to connect the printer to a

power source that lacks a ground connection terminal.

This product should be operated from the type of power source

indicated on the marking label. If you are not sure of the type

of power available, consult your local power company.

The power supply cord is the disconnect device for this

equipment. Make sure that the installation is near the socket

outlet and is easily accessible.

Do not allow anything to rest on the power cord. Do not locate

the printer where someone will step on the cord.

(continued)

SAFETY NOTES (continued)

Slots and openings in the cabinet and in the back and bottom

of the printer are provided for ventilation. To ensure reliable

operation of the printer and to protect it from overheating, these

openings should never be placed near a radiator or heat

installation unless proper ventilation is provided.

Never push objects of any kind into the slots of the printer as

they may touch dangerous voltage points or short out parts that

could result in a risk of fire or electric shock.

Never spill liquid of any kind on the printer.

Never remove any covers or guards that require a tool for

removal. There are no operator serviceable areas within these

covers.

Never attempt any maintenance function that is not specified in

this operator manual.

Never defeat interlock switches. Machines are designed to

prevent operator access to unsafe areas. Covers, guards, and

interlock switches are provided to ensure that the system will

not operate with the covers opened.

Unplug the printer from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

When the power cord is damaged or frayed.

If liquid has been spilled into the product.

If the printer has been exposed to rain or water.

If the printer is producing unusual noises or odors.

If the printer or the cabinet has been damaged.

If you need additional safety information concerning the XES

8855 Engineering Printer or XES supplied materials, you may

call the following toll-free number:

1-800-828-6571. (continued)

SAFETY NOTES (continued)

GROUND FAULT PROTECTION

The XES 8855 Engineering Printer is equipped with an

additional safety feature, a Ground Fault Interrupter (GFI). This

safety device will remove all power to the printer if an electrical

fault is detected.

In the event that power is interrupted to the printer, locate the

GFI safety device on the power cord:

Check that a red indicator appears in the window (A) of the

safety device shown opposite.

If no indicator is present, press and release the black RESET

button (B). The red indicator should appear in the window, and

power should be restored to the printer.

if the device interrupts power to the printer again, or if power is

not restored by performing the above procedure, call Xerox

Service to correct the problem.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Xerox Imprimante

Xerox

Xerox Phaser 5500 series Manuel utilisateur

Xerox

Xerox Printer fwww Manuel utilisateur

Xerox

Xerox Phaser 7100 Manuel d'utilisation

Xerox

Xerox 3600DN - Phaser B/W Laser Printer Manuel utilisateur

Xerox

Xerox Phaser 1235 Manuel utilisateur

Xerox

Xerox DocuPrint NC60 Manuel de service

Xerox

Xerox Phaser 7750 Manuel utilisateur

Xerox

Xerox DocuColor 7002 Manuel utilisateur

Xerox

Xerox DocuPrint N4525 Manuel du propriétaire

Xerox

Xerox Wide Format 6030 Manuel utilisateur

Xerox

Xerox Phaser 5550 Manuel utilisateur

Xerox

Xerox VersaLink C400 Manuel utilisateur

Xerox

Xerox DocuPrint 525/1050 Manuel utilisateur

Xerox

Xerox 4050 Manuel technique

Xerox

Xerox VersaLink C400 Manuel utilisateur

Xerox

Xerox DocuPrint P8EX Manuel utilisateur

Xerox

Xerox Phaser 6510 Manuel utilisateur

Xerox

Xerox 6200DX - Phaser Color Laser Printer Manuel utilisateur

Xerox

Xerox Phaser 3052 Manuel d'utilisation

Xerox

Xerox DOCUCOLOR 12 Manuel utilisateur

Xerox

Xerox Phaser 7100 Manuel utilisateur

Xerox

Xerox VersaLink C415 Manuel utilisateur

Xerox

Xerox Phaser 6500 Manuel d'utilisation

Xerox

Xerox DocuPrint 180 IPS Series Manuel technique

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur