Xerox Phaser 7750 Instructions d'installation et d'entretien

Phaser® 7750 Color Laser Printer

3-2

Connections and IP Address

This topic includes:

■"Printer Setup" on page 3-2

■"Connection Setup" on page 3-6

Printer Setup

Ethernet Connection (Recommended)

An Ethernet connection is recommended because it is faster than a USB cable connection. It

also allows the user direct access to CentreWare IS.

Network Connection

Use an Ethernet connection with two twisted-pair (Category 5/RJ-45) cables and an Ethernet

hub. Connect the computer to the hub with one cable, then connect the printer to the hub with

the second cable. Connect to any port on the hub except the uplink port. TCP/IP and EtherTalk

are the most common protocols used with Ethernet cables. To print using TCP/IP, each

computer and printer requires a unique IP address. Go to “Setting an IP Address” in this

section.

Standalone (Cable or DSL) Network Connection

For information about setting up a cable or DSL connection for your printer, go to

www.xerox.com/office/infoSMART to view Document # 33188, entitled Basic TCP/IP

Tutorial and Home Networking Guidelines.

Setting an IP Address

If your computer is on a large network, contact your network administrator for the appropriate

TCP/IP addresses and additional configuration information.

If you are creating your own small Local Area Network or connecting the printer directly to

your computer over Ethernet, follow the procedure for automatically setting the printer’s IP

address.

The printer and computer(s) must have unique IP addresses. It is important that the addresses

are similar, but not the same. For example, your printer can have the address 192.168.1.2 while

your computer has the address 192.168.1.3. Another device can have the address 192.168.1.4.

For more information, go to www.xerox.com/office/infoSMART to view Document # 18545.

The information in this section is also stored as an information page in your printer.

Use the front panel to quickly print this information in the future.

Connections and IP Address

Phaser® 7750 Color Laser Printer

3-3

Automatically Setting the Printer’s IP Address

Use the Phaser installer on the Printer Installer and Utilities CD-ROM to detect and/or assign

an IP address to your printer. For further instructions, insert the Printer Installer and Utilities

CD-ROM into your computer’s CD-ROM, launch the installer, then follow the prompts for

installation.

Note

For the automatic installer to function, the printer must be connected to a TCP/IP network.

Manually Setting the Printer's IP Address

1. At the printer's front panel, select Printer Setup, then press the OK button.

2. Select Connection Setup, then press the OK button.

3. Select Network Setup, then press the OK button.

4. Select TCP/IP Setup, then press the OK button.

5. Select DHCP/BootP, then press the OK button to select Off.

6. Select TCP/IP Address, then press the OK button.

7. Enter your printer’s IP address, then press the OK button.

Setting a Static IP Address on Your Computer

Windows 2000, Windows XP, and Windows Server 2003

1. On the desktop, right-click My Network Places, then click Properties.

2. Right-click Local Area Connection, then click Properties.

3. If you do not have TCP/IP available, click Add, then click Protocol.

4. Click Add, then click Internet Protocol TCP/IP.

5. Select the General tab, select the TCP/IP protocol for your network card, then click

Properties.

6. Select the General tab, then click Use the following IP address.

7. Enter an IP address and Subnet mask, then click OK.

8. If prompted, click OK to restart Windows.

Windows NT 4.x

1. On the desktop, right-click Network Neighborhood, then click Properties.

2. On the Protocols tab, click TCP/IP Protocol, then click Properties.

3. Select the IP Address tab, then click Specify an IP Address.

4. Enter an IP Address and Subnet mask, then click OK.

5. If prompted, click OK to restart Windows.

Windows 98 and Windows Me

1. On the desktop, right-click Network Neighborhood or My Network Places, then click

Properties.

2. On the Configuration tab, select the TCP/IP protocol for your network card, then click

Properties.

Connections and IP Address

Phaser® 7750 Color Laser Printer

3-4

3. Select the IP Address tab, then click Specify an IP address.

4. Enter an IP address and Subnet mask, then click OK.

5. If prompted, click OK to restart Windows.

Macintosh OS 9.x TCP/IP

1. Click the Apple icon, then select the Controls Panel folder.

2. Double-click TCP/IP, then verify that Ethernet is the connection type.

3. Enter an IP address and Subnet mask, then click OK.

4. If prompted, click OK to restart.

Macintosh OS X (10.1 and higher) TCP/IP

1. Click the Apple icon, click System Preferences, then click the Network icon.

2. In the Network control panel, click the TCP/IP tab.

3. Under Location, click Automatic.

4. Under Show, click Built-in Ethernet.

5. Under Configure, click Manually.

6. Enter the IP Address, Subnet Mask, and Router (Gateway).

7. Click Apply Now to activate the changes.

USB Connection

The USB connection requires a standard USB cable. This cable is not included with your

printer and must be purchased separately. Verify that you are using the correct USB cable for

your connection.

Windows 98 or Later and Windows 2000 or Later

Connect the USB cable to the PC and follow the Add New Hardware Wizard to create the

USB port. Follow the Add Printer Wizard to install the printer driver from the Printer

Installer and Utilities CD-ROM. For more information go to www.xerox.com/office/

infoSMART to view these documents:

■Windows 98: Document # 18215

■Windows 2000: Document # 22701

■Windows XP: Document # 53543

Macintosh OS 9.x

A USB-connected printer does not display in the Chooser. Install the printer driver from the

Printer Installer and Utilities CD-ROM. Use the Desktop Printer Utility (version 1.2 or later)

to create a desktop USB printer. The utility is located in the PhaserTools folder which is

created during the software installation. For more information go to www.xerox.com/office/

infoSMART to view Document # 33225.

Connections and IP Address

Phaser® 7750 Color Laser Printer

3-5

Macintosh OS X (10.1 and Higher)

1. Install the printer driver from the Printer Installer and Utilities CD-ROM.

2. Open the Print Center utility. (On the Macintosh hard drive, open the Applications

folder, then open the Utilities folder.)

3. Click the Add button.

4. Select USB from the top drop-down list.

5. Select the printer in the printers window.

6. Verify that your printer is set to Auto Select.

7. Click the Add button.

The printer is displayed as an available printer in the Print Center. For more information, go

to www.xerox.com/office/infoSMART to view Document # 49355.

Connections and IP Address

Phaser® 7750 Color Laser Printer

3-6

Connection Setup

Installing the Printer Driver

To download the latest printer drivers, go to www.xerox.com/office/support.

Windows 98 or Later and Windows 2000 or Later

Install the printer driver from the Printer Installer and Utilities CD-ROM. The Printer

Installer and Utilities CD-ROM automatically installs and identifies the printer during the

installation process. For more information go to www.xerox.com/office/infoSMART to view

these documents:

■Windows 98 and Windows Me: Document # 9840

■Windows 2000, Windows XP, and Windows Server 2003: Document # 36894

■Windows NT: Document # 11338

Macintosh OS 9.x EtherTalk

If you use EtherTalk, Macintosh computers do not require IP addresses.

1. Open the AppleTalk Control Panel.

2. Verify that the Ethernet port is the selected network port.

3. Double-click the installer on the Printer Installer and Utilities CD-ROM to install the

printer driver.

4. Open the Chooser, then click the LaserWriter driver.

5. From the right column of the Chooser, select the printer, then click Create to create the

desktop printer.

For more information go to www.xerox.com/office/infoSMART to view Documents # 2562

and # 1886.

Macintosh OS X (10.1 and Higher)

Macintosh OS X supports TCP/IP as the default protocol, as well as AppleTalk. For a TCP/IP

installation, follow the instructions provided to set an IP address in the printer.

1. Install the printer driver from the Printer Installer and Utilities CD-ROM.

2. Open the Print Center utility. (On the Macintosh hard drive, open the Applications

folder, then open the Utilities folder.)

3. Click the Add Printer button.

4. Choose the connection type you desire.

■For LPR, enter the IP address of the printer that you set previously. The Queue Name

field remains blank if the Use default queue on server box is checked (by default).

Other options are PS or AUTO. Select the appropriate PPD for the printer model

under the Printer Model drop-down list.

■For AppleTalk, select the appropriate printer from the list that is displayed. The

configuration process continues until configuration is complete. If AppleTalk is not

available in the Print Center drop-down list, the AppleTalk protocol is disabled and

must be installed on the Macintosh. If the AppleTalk protocol is enabled, but is not

Connections and IP Address

Phaser® 7750 Color Laser Printer

3-7

available in the drop-down window, it is recommended that you contact your system

administrator or Apple Computer Incorporated for assistance.

■For Rendezvous, select the appropriate printer from the list that is displayed.

For more information go to www.xerox.com/office/infoSMART to view Documents # 48704,

# 50080, and # 49814.

Dynamic Methods of Setting the Printer’s IP Address

An Internet Protocol (IP) address is required to identify your printer on a network. Set the

printer’s IP address by any of the following methods:

■DHCP

■CentreWare Internet Services

■Auto IP (Host Names)

Enabling DHCP on the Printer

Verify that the printer’s DHCP protocol is enabled by setting the front panel or using

CentreWare IS.

Note

To determine your printer’s IP address, select Printer Identification at the front panel.

For information about the front panel, go to Reference/Features on the User

Documentation CD-ROM.

Information Required for IP Addressing

Information Comments

Internet (IP) address for the printer Format is xxx.xxx.xxx.xxx, where xxx represents

a decimal number from 0–255.

Network Mask If you are unsure, leave this blank; the printer

chooses an appropriate mask.

Default Router/Gateway address If you want to communicate with the printer from

anywhere other than the local network segment,

you need the router address.

Connections and IP Address

Phaser® 7750 Color Laser Printer

3-8

Changing or Modifying the IP Address Using CentreWare Internet Services (IS)

CentreWare IS is a printer administration and support tool using web technology. With

CentreWare IS software, you can access printer status and manage your printer over a TCP/IP

network using a web browser. For more information, go to Explore/CentreWare IS on the User

Documentation CD-ROM.

After setting the printer’s IP address, you can modify the TCP/IP using CentreWare IS.

1. Launch your web browser.

2. Enter your printer's IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Select Properties.

4. Select the Protocols folder on the left sidebar.

5. Select TCP/IP.

6. Enter or modify your printer’s settings, then click Save Changes at the bottom of the page.

Using Host Names with the Domain Name Service (DNS)

The printer supports DNS through an embedded DNS resolver. The DNS resolver protocol

communicates with one or more DNS servers to resolve the IP address for a given host name

or the host name for a given IP address.

To use an IP host name for the printer, the system administrator must configure one or more

DNS servers and a local DNS domain name space database.

To set up the printer for DNS, supply a maximum of two DNS name server IP addresses. There

are two ways to set up the printer:

■TCP/IP–Go to “DNS Setup Using CentreWare Internet Services.”

■DHCP–Go to “Dynamic Domain Name Service (DDNS).”

DNS Setup Using CentreWare Internet Services

Set up the printer for DNS using CentreWare IS after setting the printer’s IP address.

1. Launch your web browser.

2. Enter your printer's IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Select Properties.

4. Select the Protocols folder on the left sidebar.

5. Select TCP/IP.

6. In the DNS Settings section, enter your domain server’s IP address in these fields:

■Primary Name Server IP Address (required)

■Second Name Server IP Address (optional)

7. Click Save Changes when you are finished entering the settings.

Dynamic Domain Name Service (DDNS)

This printer supports Dynamic DNS through DHCP. You must have DHCP enabled on the

printer for DDNS to function. Your network’s DHCP server must also support Dynamic DNS

updates through option 12 or option 81 support. See your network administrator for details.

1. Launch your web browser.

2. Enter your printer's IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

Connections and IP Address

Phaser® 7750 Color Laser Printer

3-9

3. Select Properties.

4. Select the Protocols folder on the left sidebar.

5. Select TCP/IP.

6. In the BOOT/DHCP Settings section, set the BOOTP/DHCP option to ON.

7. To enable DDNS, enter the following DDNS/WINS settings information:

■DDNS - Set to ON.

■Release Host Name - Set to NO.

■DDNS/WINS Name - Use the default name provided by Xerox or enter another name.

■Primary WINS Server (optional)

■Secondary WINS Server (optional)

8. Click Save Changes when you are finished entering the settings.

Other Resources

For more information about network setup and troubleshooting, go to Reference/Connections

& Networks on the User Documentation CD-ROM.

Autres manuels pour Phaser 7750

Table des matières

Autres manuels Xerox Imprimante

Xerox

Xerox 6125N - Phaser Color Laser Printer Manuel utilisateur

Xerox

Xerox ColorQube 8900 series Manuel utilisateur

Xerox

Xerox Phaser 7300 Manuel utilisateur

Xerox

Xerox 4050 Manuel technique

Xerox

Xerox 701P40016 Manuel utilisateur

Xerox

Xerox DocuPrint N2825 Manuel utilisateur

Xerox

Xerox DocuPrint C3120 DX Manuel utilisateur

Xerox

Xerox Phaser 3600 Manuel d'utilisation

Xerox

Xerox Document Workcenter 150 Manuel utilisateur

Xerox

Xerox Phaser 3425 Manuel utilisateur

Xerox

Xerox DocuTech 6155 Manuel utilisateur

Xerox

Xerox PHASER 6010 Manuel d'utilisation

Xerox

Xerox Phaser 7760 Manuel utilisateur

Xerox

Xerox Phaser 6180 Manuel utilisateur

Xerox

Xerox ColorQube 8580 Manuel de service

Xerox

Xerox 3150 - Phaser B/W Laser Printer Manuel utilisateur

Xerox

Xerox Phaser 6140N Manuel d'utilisation et d'entretien

Xerox

Xerox C11 - DocuPrint Color Inkjet Printer Manuel utilisateur

Xerox

Xerox DocuPrint N4525 Manuel utilisateur

Xerox

Xerox Error Manuel du propriétaire

Xerox

Xerox WORKCENTRE 7435 Manuel utilisateur

Xerox

Xerox Phaser 7300 Instructions d'installation

Xerox

Xerox 6360DN - Phaser Color Laser Printer Manuel du propriétaire

Xerox

Xerox C315 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur