Xerox DocuPrint 180 IPS Series Manuel technique

Xerox DocuPrint 96/4635/180 IPS

Installation Planning Guide

Version 7.1

$XJXVW

2000

721P88230

Xerox Corporation

701 South Aviation Boulevard

El Segundo, CA 90245

copyrightable material and information now allowed by statutory or

judicial law or hereinafter granted, including without limitation,

material generated from the software programs which are displayed

on the screen, such as icons, screen displays, looks, etc.

Printed in the United States of America.

Publication number: 721P88230

Xerox

·,

The Document Company, the stylized X, and all Xerox

product names mentioned in this publication are trademarks of Xerox

Corporation. Products and trademarks of other companies are also

acknowledged.

Changes are periodically made to this document. Changes, technical

inaccuracies, and typographic errors will be corrected in subsequent

editions.

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE iii

Laser safety

!Warning: Adjustments, use of controls, or performance of

procedures other than those specified herein may result in

hazardous light exposure.

The Xerox DocuPrint printers are certified to comply with the

performance standards of the U.S. Department of Health, Education,

and Welfare for Class 1 laser products. Class 1 laser products do not

emit hazardous radiation. The DocuPrint printers do not emit

hazardous radiation because the laser beam is completely enclosed

during all modes of customer operation.

The laser danger labels on the system are for Xerox service

representatives and are on or near panels or shields that must be

removed with a tool. DO NOT REMOVE LABELED PANELS OR

PANELS NEAR LABELS. ONLY XEROX SERVICE

REPRESENTATIVES HAVE ACCESS TO THESE PANELS.

Ozone information

This product produces ozone during normal operation. The amount

of ozone produced depends on copy volume. Ozone is heavier than

air. The environmental parameters specified in the Xerox installation

instructions ensure that concentration levels are within safe limits. If

you need additional information concerning ozone, call 1-800-828-

6571 to request the Xerox publication 600P83222, OZONE.

Operation safety

Your Xerox equipment and supplies have been designed and tested

to meet strict safety requirements. They have been approved by

safety agencies, and they comply with environmental standards.

Please observe the following precautions to ensure your continued

safety.

•Always connect equipment to a properly grounded electrical

outlet. If in doubt, have the outlet checked by a qualified

electrician.

!Warning: Improper connection of the equipment grounding

conductor may result in risk of electrical shock.

•Never use a ground adapter plug to connect equipment to an

electrical outlet that lacks a ground connection terminal.

•Always place equipment on a solid support surface with

adequate strength for its weight.



iv XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE

•Always use materials and supplies specifically designed for

your Xerox equipment. Use of unsuitable materials may result in

poor performance and may create a hazardous situation.

•Never move either the printer or the printer controller without

first contacting Xerox for approval.

•Never attempt any maintenance that is not specifically

described in this documentation.

•Never remove any covers or guards that are fastened with

screws. There are no operator-serviceable areas within these

covers.

•Never override electrical or mechanical interlocks.

•Never use supplies or cleaning materials for other than their

intended purposes. Keep all materials out of the reach of

children.

•Never operate the equipment if you notice unusual noises or

odors. Disconnect the power cord from the electrical outlet and

call service to correct the problem.

If you need any additional safety information concerning the

equipment or materials Xerox supplies, call Xerox Product Safety at

the following toll-free number in the United States:

1-800-828-6571

For customers outside the United States, contact your local Xerox

representative or operating company.

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE v

Table of Contents

Laser safety iii

Ozone information iii

Operation safety iii

Introduction xi

About this guide xi

Contents xi

Conventions xii

Notice xii

1. Product overview 1-1

System overview 1-1

System components 1-3

System features 1-4

NPS/IPS Dual Mode 1-6

MICR printing features 1-7

Sixth Sense 1-8

2. Controller components and options 2-1

Controller hardware 2-1

Sun Ultra 2 workstation 2-1

Sun Ultra 60 workstation 2-4

IPS user interface screen 2-8

Host Channel Unit—channel-attached systems only 2-10

3. Printer components and options 3-1

Printer components 3-1

Printer control console 3-2

Printer configurations 3-4

Printer options 3-6

Bypass transport 3-6

Bypass transport printer configurations 3-7

Input enablement 3-8

Configurations supported 3-9

4. Preparing for installation 4-1

Responsibilities 4-1

Xerox responsibilities 4-1

Customer responsibilities 4-2

TABLE OF CONTENTS

vi XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE

Installation planning checklist 4-4

Connectivity requirements 4-7

Ethernet specifications 4-7

Token Ring specifications 4-7

Channel-attached specifications 4-7

5. Controller specifications and requirements 5-1

Power requirements 5-1

Outlet configurations 5-2

Space requirements 5-3

Printer controller placement 5-3

Sun Ultra 2 workstation placement 5-4

Sun Ultra 60 workstation placement 5-6

HCU placement (channel-attached systems only) 5-8

Printer controller hardware specifications and requirements summary 5-9

6. Printer specifications and requirements 6-1

Power requirements 6-1

Outlet configurations 6-2

Printer outlet voltages—60 Hz 6-2

Printer outlet voltages—50 Hz 6-4

Environmental specifications 6-6

Space requirements 6-7

Printer placement 6-7

Bypass transport specifications 6-12

Configuration diagrams with bypass transport 6-17

Space planning guidelines 6-20

Clearance space requirements 6-20

Shared space 6-20

Floor leveling 6-24

Delivery access requirements 6-24

Turning radius 6-25

Printer hardware specifications and requirements summary 6-29

Space planning templates 6-32

7. System connections 7-1

Cable lengths 7-1

Cable locations 7-2

Channel attachments 7-2

TABLE OF CONTENTS

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE vii

8. Installation 8-1

Installation process 8-1

Your responsibilities 8-2

Defining the IPS printer to the host 8-3

Software licensing 8-3

Ongoing maintenance 8-4

Routine maintenance 8-4

Meter reading and reporting 8-4

A. Supplies A-1

Paper and other throughput stocks A-1

Selecting paper A-1

Paper width and printer performance A-3

Paper care A-9

Other supplies A-12

Dry ink A-12

Fuser agent A-12

Developer A-12

Diskettes A-13

Cartridge tapes A-13

MICR tools A-14

MICR Positioning and Dimension Gauge A-14

MICR comparator A-14

Consumable supplies tables A-15

Paper and special stocks tables A-15

Complete supplies list—96/4635/180 printers A-21

Ordering supplies A-22

B. Xerox support services B-1

Xerox Customer Service Support Center B-1

Xerox Printing Systems Customer Support Center B-2

Xerox Customer Documentation Catalog B-3

Xerox Documentation and Software Services (XDSS) B-3

Operator training B-3

Xerox Customer Education B-4

Xerox Font Center B-4

C. Related publications C-1

D. Defining the channel-attached printer to the host D-1

MVS parameters D-1

OS/2 procedures D-4

AIX procedures D-5

TABLE OF CONTENTS

viii XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE

VM sample definitions D-6

VSE sample definitions D-6

E. Defining the printer to the host: TCP/IP attachment E-1

MVS or OS/390 parameters E-1

Software prerequisites –MVS E-1

Network configurations –MVS E-2

Configuration steps –MVS E-2

1. Configure the IPS printer for TCP/IP at the GUI E-2

2. Configure the MVS CCU for the MVS host to MVS E-2

3. Configure the PSF printer in JES2 or JES3 E-2

4. Configure the printer in PSF/MVS E-7

5. Configure TCP/IP for MVS for the printer E-11

6. Test the printer to ensure it prints from the MVS host E-14

Correcting for printer performance issues –MVS E-16

References E-17

AS/400 parameters E-18

Software prerequisites –AS/400 E-18

Network configurations –AS/400 E-18

Configuration steps –AS/400 E-19

1. Configure the IPS printer for TCP/IP at the GUI E-19

2. Create the PSF/400 configuration E-19

3. Create the printer device description –AS/400 E-20

4. Test the printer connection –AS/400 E-22

Correcting for printer performance issues –AS/400 E-24

References –AS/400 E-24

AIX parameters E-25

Software prerequisites –AIX E-25

Network configurations –AIX E-26

Configuration steps—AIX E-26

References E-27

OS/2 parameters E-28

Software prerequisites –OS/2 E-28

Network configurations –OS/2 E-28

Configuration steps –OS/2 E-29

1. Configure the printer for TCP/IP in OS/2 E-29

2. Provide TCP/IP routing information, if necessary E-29

3. Define the printer to PSF/2 E-30

4. Define a PSF/2 print queue for the printer (optional) E-31

5. Test the printer connection in OS/2 E-32

Correcting for printer performance issues –OS/2 E-34

TABLE OF CONTENTS

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE ix

References –OS/2 E-35

Glossary GLOSSARY-1

Index INDEX-1

TABLE OF CONTENTS

x XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Xerox Imprimante

Xerox

Xerox Phaser 6200 Manuel d'instructions et de sécurité

Xerox

Xerox Nuvera 100 Manuel technique

Xerox

Xerox Phaser 6000 Manuel utilisateur

Xerox

Xerox Phaser 4500 Manuel utilisateur

Xerox

Xerox Phaser 6510 Manuel d'utilisation

Xerox

Xerox Phaser 4 400 Instructions de montage

Xerox

Xerox DocuPrint N17 Manuel utilisateur

Xerox

Xerox DocuPrint 155MX Manuel utilisateur

Xerox

Xerox Phaser 7300 Manuel utilisateur

Xerox

Xerox Phaser 3425 Manuel utilisateur

Xerox

Xerox D125 Manuel utilisateur

Xerox

Xerox DocuColor 3535 Manuel utilisateur

Xerox

Xerox DocuPrint 4635 Manuel

Xerox

Xerox WorkCentre 3315 Manuel d'utilisation

Xerox

Xerox Phaser 6500 Manuel d'utilisation

Xerox

Xerox Versant 80 Press Manuel utilisateur

Xerox

Xerox Legacy 4110 Manuel utilisateur

Xerox

Xerox 6204 Wide Format Solution Manuel utilisateur

Xerox

Xerox WorkCentre 7300 Series Manuel utilisateur

Xerox

Xerox WorkCentre M24 Color Manuel utilisateur

Xerox

Xerox B210 Manuel utilisateur

Xerox

Xerox phaser 3420 Manuel utilisateur

Xerox

Xerox DocuPrint 96 Manuel

Xerox

Xerox Phaser 3020 Manuel d'utilisation

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur