Xerox B210 Manuel utilisateur
Back to Previous Page
2
This package will step you through the setup process
of installing the software and drivers you need to print
and scan, and connect the printer to the network.
You will be asked questions along the way to identify
the appropriate process steps to follow.
After performing the step or to answer the question,
click on the red arrows to proceed onto the next
step. To go back, click on the gray arrow on the
top right of the page.
Follow the hyperlinks to read instructional articles,
watch videos, or obtain file downloads from
support.xerox.com
Before you start!
Next
Back to Start
Back to Previous Page
3
Terminology You Need to Know
Network: A system of linked devices that share resources, such as Internet access and printers, connected through a
common wireless (Wi-Fi) or wired (supported by Ethernet cords) network router.
Wi-Fi Direct: This is a feature on your printer/MFP that when enabled, emits a wireless signal that Wi-Fi capable
devices (e.g. phones, computers) can directly connect to for printing. You can connect your device to the printer’s
wireless signal just like you would connect to an Internet router’s Wi-Fi signal.
Computer’s Operating System (OS): This is the software version that your computer is running. Your operating
system determines which print drivers and Xerox applications you will use for printing and scanning.
Utility, or Utility Pack: This is a set of files, software and tools that must be downloaded to your computer to setup
your printer. After being downloaded, the files may need to be installed manually on your PC, or will be automatically
installed with the help of an imbedded “wizard” or executable file. The package contents vary based on your PC’s OS,
but they generally contain drivers for printing, scanning and faxing as well as Wi-Fi setup assistant. They may contain
applications that allow you to fax, scan, or access your printer’s advanced settings from your desktop.
CentreWare Internet Services (CWIS): This is your printer’s web interface where you can manage advanced settings.
You access it by entering your printer’s IP address in your web browser. Your printer must be on the network or have
Wi-Fi direct enabled in order to access CWIS. Next
Back to Start
Back to Previous Page
4
Perform the following steps:
1) Unpack the box and locate the installation
poster and USB cord
2) Remove all the internal packaging and tape
3) Plug the printer into an outlet and power on
4) Load the paper
➢Click here to view a video about unboxing
your printer.
Unpacking and Powering On
Next
Back to Start
Back to Previous Page
6
How do you want to connect the printer to the
Windows computer?
Directly with a USB cord
This method directly connects your
printer to your computer using a USB
cord. Your printer must be located
within the cord’s reach of the
computer. The USB cord was shipped
with your printer.
This method is not recommended if
you plan to print from mobile devices.
Through the network with an
Ethernet cord
This method connects your printer to
your network using a cable. Any
computer or device that is also on the
network can print to it. The Ethernet
cord is not provided.
If you do not have a wireless network
router, you can use Wi-Fi direct to
print from devices that are not on the
network. The networked printer can be
configured to emit a signal that
devices can directly connect to.
Through the network via Wi-Fi
This method wirelessly connects your
printer to your home office network.
Any computer or device that is also on
the network can print to it. You must
have a wireless router and a good Wi-
Fi signal.
You can also enable Wi-Fi direct to
print from devices that are not on the
network. The networked printer can be
configured to emit a signal that
devices can directly connect to.
Back to Start
Back to Previous Page
7
Perform these steps at your PC:
1. Connect the printer and the computer using the provided USB cable
2. Install the software by either installing the CD that was shipped
with your printer or downloading the utility file
Xerox_B210_Windows_PrintDriver_Utilities_Signed.zip from here.
3. Run the executable (.exe) file
The program will connect to the printer, walk you through
adding the printer to the network, install the Easy Printer
Manager software and drivers, and print a test page.
➢To view a video about using the utility, click here.
➢Note: to manually add the printer to the network using WPS, refer
to the KB articles for Wi-Fi and wired setups.
Next
Prepare for Driver Installation and Connection Setup
Back to Start
Back to Previous Page
8
Enable Wi-Fi Direct from the “Easy Printer
Manager” application on your computer.
Wi-Fi Direct can be used as a backup connection, to
support wireless printing from non-networked
devices, and to access advanced settings in CWIS.
1. Open Easy Printer Manager > Select Advanced Settings >
hover over Device Settings, then select Network Settings.
For Wi-Fi Direct, select On to enable the feature.
2. Make note of the IP Address displayed. It will be used later to
access the printer's web interface (CentreWare Internet Services).
3. For Network Key, enter a password that contains at least 8
characters. This password will be used later to connect to the
printer's Wi-Fi Direct signal.
4. Click Save to save the settings.
Setup Wi-Fi Direct
Next
Back to Start
Back to Previous Page
9
If you need to enable or disable the banner
page from printing with each print job, this
can be configured in CWIS.
The banner page is a cover page that contains
information identifying the user and job name.
➢Click here to read the knowledge base instructions.
Enable or Disable the Banner Page
Next
Back to Start
Autres manuels pour B210
7
Autres manuels Xerox Imprimante
Xerox
Xerox Phaser 6500 Manuel d'utilisation
Xerox
Xerox 4050 Manuel utilisateur
Xerox
Xerox Phaser 4 400 Manuel utilisateur
Xerox
Xerox 3600DN - Phaser B/W Laser Printer Manuel technique
Xerox
Xerox 4235 Manuel technique
Xerox
Xerox Phaser 7760 Manuel utilisateur
Xerox
Xerox Phaser 3052NI Manuel utilisateur
Xerox
Xerox Phaser 3052 Manuel utilisateur
Xerox
Xerox 4060 Mode d’emploi
Xerox
Xerox PHASER 6250 Manuel utilisateur
Xerox
Xerox Phaser 5550 Manuel d'utilisation
Xerox
Xerox DocuColor 3535 Manuel utilisateur
Xerox
Xerox CentreWare DC220 Instructions d'utilisation
Xerox
Xerox Phaser 8200 Manuel utilisateur
Xerox
Xerox DocuPrint C2428 Manuel utilisateur
Xerox
Xerox Phaser 4500 Manuel utilisateur
Xerox
Xerox AltaLink B8000 Series Manuel utilisateur
Xerox
Xerox 7700 Manuel utilisateur
Xerox
Xerox Phaser6100 Guide de démarrage rapide
Xerox
Xerox 5500/YDN - Phaser B/W Laser Printer Manuel utilisateur
