Xerox WorkCentre 7232 Manuel utilisateur

Xerox WorkCentre®7232/7242

Quick Scan Features

Setup Guide

This guide includes instructions for:

Scan to E-mail on page 1

Scan to Mailbox Setup (Optional) on page 6

Network Scanning Setup (Optional) on page 9

Scan to PC (Optional) on page 14

Scan to E-mail

Hard copies can be scanned at the device and sent to remote clients as E-mail attachments in

TIFF/JPEG, Multi-page TIFF, Single-page TIFF, JPEG, and PDF format. SMTP and POP3

mail servers are used to send and receive E-mail respectively.

See also:

System Administrator Guide: Contains detail about E-mail setup.

InteractiveUser Guide: Contains information on how to send an E-mail and how to set

various E-mail options.

701P47281 v1.0

Scan to E-mail

Prerequisites for Scan to E-mail Setup

Confirm that:

1. An existing operational network using TCP/IP is available.

2. The device has been set up with DNS (if you will be entering the Host Name of the

SMTP server into the machine).

3. The Domain Name settings for the network have been correctly setup for the device.

* Only if the SMTP server requires login and password for authentication.

Data to Setup E-mail Install Requirement Comments

SMTP mail server Host

Name or IP address Required If using an external mail

server,yourInternetService

Provider will provide you

with the mail server name or

IP address.

SMTP login/password Required*

WorkCentre E-mail address Required This E-mail address will fill

in the "From" field on the E-

mails sent from the device.

Local E-mail addresses Optional A Local Address Book can

be created to store E-mail

addresses.

LDAP server address can

be enabled LDAP Host Name Displays only E-mail

addresses on the corporate

(LDAP) internal address

book.

Scan to E-mail

Procedure for Scan to E-mail Setup

1. Press Log In/Out, then type the Login ID 11111 and press Enter.

2. Press Machine Status, then touch the Tools tab.

3. Select System Settings, then touch Connectivity and Network Setup.

4. Select Port Settings.

5. On the Port Settings screen, scroll to and select Send E-mail and then select Change

Settings.

6. On the Send E-mail screen, select Port Status and select Change Settings.

7. On the Send E-mail Port Status screen, select Enabled then select Save.

8. Touch Close.

9. On the Port Settings screen, scroll to and select Receive E-mail, then select Change

Settings.

10. On the Receive E-mail screen, select Port Status, then Change Settings.

11. On the Receive E-mail Port Status screen, select Enabled, then Save and Close.

12. On the Port Settings screen, scroll to and select E-mail Notification Service, then

select Change Settings.

13. On the E-mail Notification Service screen, select Port Status, then Change Settings.

14. On the E-mail Notification Service - Port Status screen, select Enabled, then Save.

15. Select Close until the Tools tab screen is displayed.

16. Press the Log In/Out button.

17. Select Reboot Now to save the changes and restart the machine.

Scan to E-mail

Procedure for Configuring the Outgoing E-mail Settings

1. From a workstation, open up a web browser (such as Internet Explorer), and then enter

the IP address in the format http://xxx.xxx.xxx.xxx (the xxx's represent the device IP

address). If connected properly, you should see a CentreWare Internet Services web

page for your device.

2. Set up the SMTP server configuration via CentreWare Internet Services:

a. Click the Properties tab.

b. On the Configuration Overview screen, click the Settings... button for E-mail

(in the Services area).

c. Click the Configure... button for SMTP Server.

d. Enter the SMTP Server IP Address / Host Name & Port (the default is port 25).

If the Host Name of the SMTP server is entered, then the machine must be set up

with DNS settings.

e. Enter the WorkCentre E-mail Address.

f. Select a Login Credentials type, if required.

g. Enter a Login Name and Password to be used for credentials, if required.

h. Click Apply.

i. Enter the user name of 11111 and the password of x-admin if prompted for a User

name and Password.

j. Click on Reboot Machine.

3. From the device, load a sample document into the document feeder.

4. Press the All Services button.

5. Touch the E-Mail icon.

6. Touch the New Recipients button

7. Use the touch screen keyboard to enter an E-mail address.

8. Touch the Add button.

9. Press the Start button.

10. Verify that the recipient received the E-mail with the document attached.

Scan to E-mail

Scan to E-mail Troubleshooting

For internal corporate mail servers, substitute the word "Corporate" for "ISP" in the

following troubleshooting table.

Note

The remaining topics in this guide apply ONLY to options available in the

Network Scanning kit.

If you have purchased ONLY the Scan to E-mail kit, the rest of the topics in this

guide are not applicable.

Symptom Possible Cause Resolution/Validation

SMTP error at

multifunction device

Incorrect Mail Server or

Host Name Validate that the correct ISP mail

server name has been entered in

the SMTP Host Name field.

Incorrect settings in

Microsoft Outlook Express Verify that you can access the ISP

mail server from within Microsoft

Outlook Express and that all

settings are correct.

Incorrect multifunction

device E-mail address

entered

Verify that the device is using the

correct E-mail address in the

From: field. The E-mail address

must match what the ISP's mail

server is expecting.

ISP requires SMTP

authentication to their mail

server

Check with your ISP to determine

if this is a requirement. If so,

enable SMTP authentication for

the multifunction device via

CentreWare Internet Services.

ISP does not allow mail on

the standard port number

Check with your ISP to determine

if this is the problem. Ask if they

can accept mail on another port

number. If so, change the SMTP

port number for the multifunction

device via CentreWare Internet

Services.

ISP requires login to the E-

mail account via Microsoft

Outlook Express before

allowing mail to be sent

Check with your ISP to determine

if this is a requirement. If so, login

to the Microsoft Outlook Express

account, and then try sending the

E-mail. If this is successful, you

can set Outlook Express to check

E-mail every 5 or 10 minutes for

the multifunction device's E-mail

account.

Scan to Mailbox Setup (Optional)

This feature allows documents to be stored in a mailbox for future processing. Scan to

Mailbox can be setup at the machine control panel or at a network computer through the

CentreWare Internet Services webpage. Instructions for each method are shown.

See also:

System Administrator Guide: Contains detail concerning Network Scanning setup.

Interactive User Guide: Contains information on using mailboxes.

Prerequisites for Scan to Mailbox Setup

Confirm that:

1. An existing operational network utilizing TCP/IP is available.

Procedure for Scan to Mailbox Setup through the Control Panel

1. Press Log In/Out.

2. On the keypad enter 11111 or the current User ID. Touch Enter when finished.

3. Press the Machine Status button on the Control Panel.

4. Press the Tools tab.

5. Press Setup and Calibration, then touch Setup.

6. Press the Create Mailbox button.

7. Scroll through the list to locate an unassigned Mailbox number with a Mailbox Name

of Not in Use.

8. Select an unassigned Mailbox number from the displayed list.

9. Touch the Create/Delete button.

10. When the New Mailbox - Assign Passcode screen displays, use the On and Off

buttons to determine whether or not a passcode will be required to access the Mailbox.

If On is selected, use the numeric keypad to enter a numbered passcode, then select the

appropriate Target Operation button to control when the passcode will be required.

11. Press the Save button to save your settings.

12. When the Mailbox Settings screen appears, five setting selections will be displayed on

numbered horizontal lines. The available selections include: Mailbox Name, Check

Passcode, Delete Documents After Retrieval, Delete Documents with Expire Date, and

Link Job Flow Sheet to Mailbox.

13. To assign a name to the Mailbox, press the Mailbox Name selection line.

14. Press the Change Settings button.

15. Use the touch screen keyboard to enter a name for your Mailbox.

16. When finished entering a name, press the Save button. (To exit the screen, without

saving changes, press the Cancel button.)

17. On the Mailbox settings screen, press any other selections as required and use the

Change Settings button to access and make setting changes. Then touch Save.

18. To exit the Mailbox settings screen, press the Close button.

19. To exit the Create Mailbox screen, touch Close.

20. Press Log In/Out.

21. Select Logout to save the changes and exit the System Administrator’s Tools mode.

Scan to Mailbox Setup (Optional)

Procedure for Scan to Mailbox Setup through CentreWare InternetServices

1. From a workstation, open up a web browser (such as Internet Explorer), and then enter

the device's IP address in the format http://xxx.xxx.xxx.xxx (the xxx's represent the

device's IP address). If connected properly, you should see a CentreWare Internet

Services web page for your device.

2. Click the Scan tab.

3. Select Mailbox in the directory tree.

4. When the numbered list of Mailboxes is shown, locate an unassigned mailbox with a

Mailbox Name of Not in Use from the displayed list and click the Create button for

that mailbox.

5. Type in a name for this Mailbox in the Mailbox Name entry box.

6. Type in a pass code in the Passcode entry box. The passcode must be numeric.

7. Confirm the pass code by retyping it in the Re-enter Passcode box.

8. Use the drop-down arrow to set Check Mailbox Passcode (recommended) to secure

your mailbox.

9. Place a checkmark in the Auto Delete Documents box if you wish to delete documents

from your mailbox after retrieving same.

10. Place a checkmark in the Delete Documents after Print or Retrieve box if required.

11. Place a checkmark in the Delete Expired Documents to delete old documents that

have not been printed or retrieved.

12. Click Apply when done.

Note

If prompted to enter a User Name and Password, the default settings are 11111

and x-admin respectively.

Scan to Mailbox Setup (Optional)

Procedure for Scanning to Mailbox

1. From the device's All Services screen, press the Scan to Mailbox button.

2. When the Scan to Mailbox screen displays, a list of mailboxes will be shown. Use the

scroll bar to scroll through the icons to locate your mailbox.

3. Select your mailbox by touching its selection line on the touch screen.

4. If a passcode was assigned to the mailbox when it was created, enter the passcode

(series of numbers) into the Passcode screen using the Control Panel's numeric keypad.

Otherwise, proceed to step 6.

5. Press the Confirm button on the touch screen.

6. Select each of the tabbed screens to access controls to set up scanning parameters.

7. Place your document in the document handler and press Start.

8. Press the Services button to return to the device's main screen.

Note

To retrieve the scanned document to a Windows PC, install the scan driver on the

PC or use CentreWare Internet Services. More information can be found on the

CentreWare Utilities CD-ROM and the "CentreWare Internet Services" chapter of

the User Guide.

Network Scanning Setup (Optional)

Network scanning uses FTP or SMB protocols to transfer scanned documents on to a server

or a client. Templates (scanned file properties) and repositories (destination folders) need to

be set up to enable network scanning.

See also:

Interactive User Guide: Contains information on how to perform a network scan, as

well as information on how to set up templates and repositories.

System Administrator Guide: Contains details about Network Scanning setup.

Prerequisites for Network Scanning Setup

Confirm that:

1. An existing operational network utilizing TCP/IP is available.

2. A repository (folder) exists on the FTP or SMB server to hold the scanned documents.

A user account for the device must be created on the server that allows access to the

repository folder.

Network Scanning Setup (Optional)

Procedure for Setup of Network Scanning Ports

To use Network Scanning, enable the applicable Ports (SMB or FTP client) on the Device,

and make sure that an IP address has been set on the machine.

Note

The configuration can also be performed using CentreWare Internet Services. For

information on how to use CentreWare Internet Services, refer to the Internet

Services section of this guide.

1. Display the System Administrator Menu screen.

a. Press the Log In/Out button.

b. Enter the Login ID (11111) with the numeric keypad or the keyboard displayed

on screen, then touch Confirm.

c. Press the Machine Status button on the Control Panel.

d. Touch the Tools tab.

2. If you plan on using the SMB protocol with Network Scanning, enable the SMB port

on the device.

a. Select System Settings.

b. Touch Connectivity and Network Setup.

c. Select Port Settings.

d. Select SMB and then select Change Settings.

e. Select Port Status and then select Change Settings.

f. Select Enabled then select Save.

g. Select Close until the Port Settings screen is displayed.

3. If you plan on using the FTP protocol with Network Scanning, enable the FTP client

port on the device.

a. Select System Settings.

b. Touch Connectivity and Network Setup.

c. Select Port Settings.

d. From the Port Settings screen, select FTP Client and then select Change

Settings.

e. Select Port Status and then select Change Settings.

f. Select Enabled then select Save.

g. Select Close repeatedly until the Tools tab screen is displayed.

4. Wait several seconds for the Auto Clear service to log you out.

5. If you changed any settings, the device will automatically reboot to register and enable

your new settings. After the machine is restarted, print out a Configuration Report to

confirm that the ports are enabled and TCP/IP is correctly configured.

Autres manuels pour WorkCentre 7232

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Xerox Imprimante tout-en-un

Xerox

Xerox WORKCENTRE C2424 Manuel utilisateur

Xerox

Xerox WorkCentre 6400S Manuel d'utilisation

Xerox

Xerox 4150 - WorkCentre B/W Laser Manuel utilisateur

Xerox

Xerox Color C60/C70 Series Manuel utilisateur

Xerox

Xerox Phaser 3100MFP Manuel utilisateur

Xerox

Xerox WorkCentre 75xx Series Manuel utilisateur

Xerox

Xerox WorkCentre Pro 412 Mode d’emploi

Xerox

Xerox Legacy 4112 Guide d'installation

Xerox

Xerox WorkCentre PE120 Manuel utilisateur

Xerox

Xerox COLORQUBE 8570 Manuel utilisateur

Xerox

Xerox WorkCentre 7655 Manuel utilisateur

Xerox

Xerox Phaser 6128 MFP Manuel utilisateur

Xerox

Xerox WorkCentre 5020B Manuel utilisateur

Xerox

Xerox WORKCENTER 5225 Manuel utilisateur

Xerox

Xerox DocuPrint C1190 FS Manuel utilisateur

Xerox

Xerox Legacy 4112 Mode d’emploi

Xerox

Xerox WorkCentre 5325 Manuel utilisateur

Xerox

Xerox WorkCentre Pro 580 Manuel utilisateur

Xerox

Xerox AltaLink B80 series Manuel utilisateur

Xerox

Xerox WorkCentre 6400 Manuel d'utilisation

Xerox

Xerox PHASER 6121MFP Manuel d'utilisation

Xerox

Xerox Work Centre 385 Manuel utilisateur

Xerox

Xerox C8130 Manuel utilisateur

Xerox

Xerox WorkCentre 3655 Manuel utilisateur

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Konica Minolta

Konica Minolta bizhub C35 Manuel utilisateur

Brother

Brother MFC-J430w Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB 558 Manuel utilisateur

Lexmark

Lexmark MX710 Series Manuel

Brother

Brother MFC-9760 Manuel utilisateur

Lexmark

Lexmark XC8155 Manuel utilisateur

Lexmark

Lexmark X642E Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Canon

Canon ImageCLASS 2300 Manuel

Ricoh

Ricoh Pro C900 Manuel utilisateur

Lexmark

Lexmark X925 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur