INTRODUCTION TO THE XDR95 DIGITAL UHF WIRELESS
Created specifically for performing and recording musicians who demand to be untethered without compromis-
ing their sound, the XDR95 24-bit digital wireless system delivers your tone and performance with the sound
and feel of a direct wire connection all with extended range and added protection from outside RF interference.
X2’s proprietary digital technology provides superior fidelity while the XDR95’s rack-mount receiver houses a micro-processor
that selects the digital data stream from among the four internal receivers to eliminate dropouts and interference including DTV
and other digital signal sources. You’ll enjoy the sound and performance of a direct wire connection free from compander ICs -
and the associated ’pumping’ and ’breathing’ - that squash your tone, as well as other problems associated with analog wireless
technology.
Operating the system is unlike any wireless you’ve tried before. Simply connect the transmitter to the source via the 1/8"
threaded-collar locking connector and the rack-mount receiver to your amplifier or mixer. Then power up making sure the
transmitter and receiver are set to the same channel. That’s it. You’re ready to go! No knobs to adjust and no complicated menus
to scroll through mean you’re up and running in the time it would take to connect a cable. For greater operating range, attach the
included 1/2 wave antenna to the BNC connectors on the back panel of the receiver. And for even greater flexibility, the system
ships complete with a front-mount antenna kit that allows you to bring the BNC connectors and antenna out to the front of the
receiver unit.
About the XDR95 Digital Wireless System
All of this sound and performance is provided to you with an incredible feature set including:
• 24-bit digital converters deliver your exact performance without the use of companders
• >118 dB dynamic range to capture your most expressive performances
• Frequency Clear™ digital transmission means no FCC or DTV concerns
• Q-DiversityPLUS™ dual-frequency transmission eliminates dropouts, multipathing and interference
• Five user-selectable channels (all five are fully compatible for simultaneous use)
• Full bandwidth frequency response 10 Hz - 20 kHz
• Balanced XLR and unbalanced 1/4” TRS outputs
• No menus to scroll through! Real-time LEDs display critical performance indicators including:
√ operating channel
√ RF status
√ link status
√ audio level
√ diversity mode
√ transmitter battery life
With the XDR95 Digital UHF Wireless System you’ll have the freedom and sound to deliver your most expressive performance
every time without any hassles or complicated setup procedures.
Thank you for choosing X2!
We have designed this product to give you reliable operation for many years to come. Over 10 years of accumulated expertise in
the design and manufacture of high-quality digital wireless systems have made X2 the leading company in this field.
To familiarize you with your new digital wireless system, we suggest that you read through this entire operation manual.
1
