X-Vision XIP3000NVR Manuel utilisateur
CCTV
Model:
VIS238D
Colour Varifocal Dome Camera
Please unpack the box carefully and identify that all the parts are present
Do not cut the cables, this will void the warranty.
Make sure you use only the recommended power supply. Damage caused to the unit
by incorrect voltage or wiring is not covered by the warranty.
Model: XIP3000NVR
4Camera MJPEG/MPEG4 NVR
CCTV
Model:
XIP3000NVR
4Camera Wireless Recorder
(NVR) for IP Cameras
Beforeyou begin
User Guide
-1-
PREFACE
Thank you for purchasing the Wireless Network Video Recorder, an IP
based device that installed on your network, which can be managed
remotely via the Internet or your LAN. Together with the Internet camera,
the Wireless Network Video Recorder allows you to remote access and
simultaneous record live video streams.
The device is easy to install and use. Simply connect it to the
router/switch within your network, and the device will automatically
access to the connected camera(s) by default IP protocol.
This User Guide provides you with the instructions and illustrations on
how to use your Wireless Network Video Recorder, which includes:
Chapter 1 Introduction to Your Device describes the components
and features of the device.
Chapter 2 Hardware Installation helps you install the device
according to your application environment.
Chapter 3 Accessing the Device lets you start using your device
without problem. The device can be set up easily and work
within your network environment instantly.
Chapter 4 Configuring the Device guides you through the
configuration of the device using the Web browser on your
PC.
Appendix Provides the specifications of the device.
NOTE The illustrations and configuration values in this guide are for
reference only. The actual settings depend on your practical
application of the device.
-2-
Table of Contents
Preface.........................................................................................................................1
Chapter 1 Introduction To Your Device ...........................................................3
1.1 Checking the Package Contents .......................................................3
1.2 Getting to Know Your Device.............................................................4
1.3 Features and Benefits............................................................................7
Chapter 2 Hardware Installation.........................................................................8
2.1 Networking Application.......................................................................8
2.2 Installing the Hard Disk Drive.............................................................9
2.3 Connecting the Network ...................................................................10
2.4 Connecting the Power Adapter.......................................................11
Chapter 3 Accessing The Device ......................................................................12
3.1 Accessing the device via My Network Places..............................12
3.2 Using IPFinder .......................................................................................14
Chapter 4 Configuring The Device ..................................................................15
4.1 Using the Setup Wizard......................................................................16
4.2 Using the Web Configuration Utility..............................................21
Appendix..................................................................................................................55
-3-
CHAPTER 1
INTRODUCTION TO YOUR DEVICE
1.1 Checking the Package Contents
Check the items contained in the package carefully. You should have the
following:
5One Wireless Network Video Recorder.
5One AC Power Adapter with power cord.
5One Ethernet Cable (RJ-45 type).
5One External Antenna.
5Four Screws.
5Four Rubber Pads.
5One Installation CD-ROM.
5One Quick Installation Guide.
NOTE Once any item contained is damaged or missing, contact the
authorized dealer of your locale.
-4-
1.2 Getting to Know Your Device
Front View
zPower Button – Press to turn on the device. Press and hold for
about five seconds to turn off. When you press the button to
boot, the button start blinking Blue, and then becomes a steady
Blue when the device is ready.
zUnmount Button (USB Port 1) – Press to safely remove the
connected USB device on the USB Port 1.
zUSB Port 1 – Connect the external USB device.
zLED Icons – The LED icons on the front panel let you know the
related status of your device. See the following table for more
information of the LED icons.
Unmount
Button
USB Port 1
LED Icons
Power
Button
-5-
Icon Description
A steady Green light indicates the device is connected to
your wireless network. When it blinks, the device is
receiving/transmitting data from/to the wireless
network.
A steady Green (1000 Mbps) or Amber (10/100 Mbps)
light indicates the device is connected to your LAN.
When it blinks, the device is receiving/ transmitting data
from/to the network.
1/2
A steady Green light indicates the hard disk drive is
installed in the device. A blinking Green light indicates
the installed hard disk drive is reading/writing data.
A steady Amber light indicates the hard disk drive is
complete full (100%). A blinking Amber light indicates
the hard disk drive is getting full (95%).
1/2
The LED off indicates no USB devices is connected to the
device.
When you connect the USB device to the device, the LED
becomes a steady Green light.
When it blinks, the device is receiving/ transmitting data
from/to the USB device.
-6-
Rear View
zPower Connector – Plug the provided AC Power Adapter.
zUSB Port 2 – Connect the external USB device. Please note that
this USB port is used for connecting a USB printer only.
zLAN Connector – Plug the provided Ethernet Cable to connect
to your LAN.
zReset Button – Press to reset the device. Press and hold for
about five seconds to resume the factory default configuration.
zAntenna Connector – Connect the external antenna.
zFan and Ventilator – Do not block or cover the ventilator for air
circulation.
Fan and
Ventilator
Power
Connector
LAN
Connector
USB Port 2 Antenna
Connector
Reset
Hole
-7-
1.3 Features and Benefits
Easy to install and use.
Remotely access and manage.
Support auto-setup while connecting up to four cameras.
Simultaneous record the live video streams.
Start recording by manual or by schedule.
The frame rate for alarm recordings can be specified independently
from the frame rate of scheduled recordings. Different video sources
can have different frame rates for scheduled recordings.
Support up to two SATA hard disk drives (SATA II is recommended).
-8-
CHAPTER 2
HARDWARE INSTALLATION
2.1 Networking Application
The following diagram explains the application of the Wireless Network
Video Recorder within your network. In the illustration below, the
Wireless Network Video Recorder and four Internet cameras are
connected to a router/ switch, which minimize the impact of the network
traffic for the users within the network.
Network Video Recorder in your networking environment
-9-
2.2 Installing the Hard Disk Drive
1. Disconnect the power cable of the device.
2. Remove two screws on the rear
panel, and then remove the rear
panel.
3. Pull the bracket out from the disk bay.
4. Place the hard disk drive on the bracket, and then secured with two
screws.
NOTE While placing the hard disk drive onto the bracket, align the
screw holes on the bottom of hard disk drive with the studs
on the base of bracket. The two studs are designed to
ensure the hard disk drive will be installed on the bracket
securely.
5. Push the bracket into the disk bay all the way until it connects the
device.
6. Replace the rear panel and secure two screws.
Table des matières
Autres manuels X-Vision Matériel réseau
Manuels Matériel réseau populaires d'autres marques
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuel utilisateur
Yudor
Yudor YDS-16 Manuel utilisateur
D-Link
D-Link ShareCenter DNS-320L Manuel utilisateur
Samsung
Samsung ES1642dc Instructions d'utilisation
Honeywell Home
Honeywell Home LTEM-PV Instructions de montage
