X-keys XK-1283-UJS3-R Manuel utilisateur

USA Sales

sales@piengineering.com

Phone: 1-517-655-5523

www.xkeys.com

USA Technical Support

tech@piengineering.com

Phone: 1- 517-655-5523

www.xkeys.com/support.php

USA Shipping Address

P.I. Engineering

101 Innovation Parkway

Williamston, MI 48895-

1663

UK Sales

xkeys@keyboardspecialists.co.uk

Tel +44(0)20 3474 0234

www.x-keys-uk.com

UK Technical Support

www.x-keys-uk.com

xkeys@keyboardspecialists.co.uk

Tel +44(0)20 3474 0234

UK Shipping Address

Keyboard Specialists Ltd

Unit 44-45, Salisbury

Street Darlaston West

Midlands WS10 8XB

United Kingdom

Limited Warranty

For all X-keys products purchased and installed in the United States, Canada and the United

Kingdom, P.I. Engineering warrants that the X-keys product will be free from defects in materials

and workmanship under normal use and service, and will meet the specifications presented by

P.I. Engineering at the time of original purchase, for one year as evidenced by a copy of the

purchase receipt. Under this warranty, P.I. Engineering will, at its sole option, repair or replace

any X-keys product which is defective, provided that you are responsible for (i) the cost of

transportation of the product to P.I. Engineering or its designated service facility, and (ii) any loss

or damage to the product resulting from such transportation.

Upon discovery of a defect in the product within the Warranty Period, you should notify

P.I. Engineering Technical Support to obtain an RMA (return authorization number) and

instructions for shipping the product to a service location designated by P.I. Engineering. You

should send the product, shipping charges prepaid, to the designated location, accompanied by

the return authorization number, your name, address, and telephone number, proof of purchase,

and a description of the defect. P.I. Engineering will pay for return of product(s) to the customer.

P.I. Engineering shall have no responsibility to repair or replace the X-keys product if the failure

has resulted from accident, abuse, mutilation, misuse, or repair/modification performed by any

entity other than P.I. Engineering.

THIS WARRANTY IS EXCLUSIVE OF ALL OTHER WARRANTIES, WHETHER EXPRESSED, IMPLIED, OR STATUTORY.

P.I. ENGINEERING DOES NOT WARRANT THIS X-keys PRODUCT FOR FITNESS FOR A PARTICULAR PURPOSE OR

MERCHANTABILITY. P.I. ENGINEERING AND ITS EMPLOYEES SHALL NOT BE HELD LIABLE FOR ANY CONSEQUENTIAL,

INDIRECT, OR INCIDENTAL DAMAGES, EVEN IF ADVISED OF THEIR POSSIBILITY, ARISING OUT OF THE USE OR

INABILITY TO USE THIS PRODUCT. SOME STATES DO NOT ALLOW FOR THE EXCLUSION OR LIMITATION OF CERTAIN

LIABILITIES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH VARY FROM STATE TO STATE.

In the event that the above limitations are held unenforceable, P.I. Engineering’s liability for any damages to you or to any party

shall not exceed the purchase price you paid, regardless of the form of any claim.

This limited warranty is valid for and only applies to products purchased and used inside the United States (and its territories),

Canada, and the United Kingdom.

This limited warranty is governed by the laws of the United States of America and the state of Michigan.

X-keys Electronic design: P.I. Engineering, Inc., Patent # 4964075

Y-mouse, Y-see two, Y-key key, X-keys, and the “P.I. Eclipse” are trademarks of P.I. Engineering, Inc.

PS/2 is a registered trademark of International Business Machines, Inc.

All other trademarks are property of their respective owners.

USA: www.piengineering.com ◘ www.xkeys.com

UK: www.x-keys-uk.com

PI Part# 1283

USB 3 Switch Interface

Product Manual

Part Number XK-1283-UJS3-R

3 Switch Ports

Made, Sold, and Supported in the USA

From P.I Engineering, The No Slogan Company

USA: www.xkeys.com

UK: www.x-keys-uk.com

Box Contents

This package contains:

1- X-keys Switch Interface

1- Product Manual

Quick Start for Windows

1. Download and install MacroWorks 3.1 (MW3) from:

http://xkeys.com/PISupport/SoftwareMacroWorks.php.

2. Plug in the X-keys Switch Interface and wait for Windows to recognize it.

3. MW3.1 will display an icon in your Windows Taskbar. Click on the icon and

select the Switch Interface.

4. Press any switch connected to the Switch Interface (or double-click on the

port image) to begin recording a macro.

5. Type keystrokes or select text, shortcut, or function. Multiple lines of

keystrokes, text, shortcuts, and functions may be entered on a single switch.

6. Press the switch again (or click Save) to complete programming.

7. When finished, close the programming window.

To quickly learn how to use MW3.1 watch the brief tutorials on our website.

Consult the MW3.1 help file for complete instructions and tips on programming

and using your X-keys.

NOTE: Mouse and joystick commands are found in the Functions menu.

Hardware Mode Programming

The X-keys XK-3 has an internal memory for storing hardware macros like

keystrokes, mouse actions, game controller (joystick) or multi-media

commands. To program these macros, use MacroWorks 3.1 in “Hardware

Resident Mode.” (under the Mode menu). Once programmed, the XK-3 will

send macros to any computer or USB enabled device with no software

installation required.

Connecting Switches

The port on the XK-3 is a TRRS (Tip-Ring-Ring-Sleeve) jack designed to

accept our three button trigger switch. Any switch wired to a standard 3.5mm

plug may be plugged into the port and the XK-3 will recognize it. Splitter

cables are available to connect two or three switches to the port. Splitters and

adapters may be combined to connect multiple switches in parallel to trigger

the same action from the switch interface.

This image illustrates how the three types of 3.5mm (1/8”) plug are recognized

by the Switch Interface.

Support

Should you encounter difficulty with the installation or programming, please

open the MW3.1 or ControllerMate Help File or check the troubleshooting

guide on our web site. You may also contact technical support.

USA: tech@xkeys.com | Phone: 1-517-655-5523

UK: xkeys@keyboardspecialists.co.uk | Tel +44 (0)20 3474 0234

Compatibility

X-keys USB devices are programmed with MacroWorks 3.1 for Windows XP

through 8 and ControllerMate for Mac OS X. Developers may also use

software development kits for Windows, Linux and Android to integrate X-keys

into their applications. Additionally, the USB 12 Switch Interface has a

hardware programming feature which allows a user to emulate keyboard,

mouse, joystick, or multimedia messages on any USB-enabled operating

system. For more information about any of these options, see our web site or

contact our Technical Support Department (tech@xkeys.com).

Compatible Accessories

Please visit the Accessories page on our website for details on the following.

X-keys Port Splitter – add more switches to the Switch Interface

Wired Foot Pedals

Wired Switches – available in a wide array of styles and colors

X-keys USB Extender – up to 150 feet via CAT5 cable

Other Products from P.I. Engineering

X-keys XK-24 – 24 programmable keys

X-keys XK-60/XK-80 – 60 or 80 programmable keys

X-keys XK-128 – 128 programmable keys

X-keys XK-12 Joystick – 12 keys with a precision joystick

X-keys XK-12 Jog & Shuttle – 12 keys with jog & shuttle

X-keys XK-3 Foot Pedal – three programmable pedals

X-keys XK-4/XK-8/XK-16 Stick – a single row of 4, 8, or 16 keys

X-keys XK-68 Joystick - 68 keys with a precision joystick

X-keys XK-68 Jog & Shuttle – 68 keys with jog & shuttle

X-keys USB 12 Switch Interface – 12 switch ports

X-keys Encoder Board – 128 switch points

FCC Declaration of Conformity

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful

interference when the equipment is operated in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and if not installed and used in

accordance with the instruction manual may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio TV technician for help.

Any changes or modifications not expressly approved by the manufacturer could void the

user’s authority to operate the equipment.

CE Declaration of Conformity

We, P.I. Engineering, Inc., declare that the X-keys is in conformance with:

EMC Directive 2014/30/EU, tested in accordance with EN 55032:2012 and

55024:2010/A1:2015

Certificate of compliance on file at P.I. Engineering, 101 Innovation Pkwy,

Williamston, MI 48895

Autres manuels X-keys Interface USB

X-keys

X-keys USB GPIO Manuel utilisateur

Manuels Interface USB populaires d'autres marques

PASCO

PASCO SCIENCEWORKSHOP 750 Manuel utilisateur

Phonic

Phonic FIREFLY 302 USB Manuel utilisateur

OHAUS

OHAUS Scout STX Series Manuel utilisateur

Denon

Denon DN-HC4500 - DJ Mixer USB Controller Manuel utilisateur

Lutron Electronics

Lutron Electronics Stanza SZ-CI-USB-CPN5138 Manuel utilisateur

Paradox

Paradox PMC5-TI00 Manuel utilisateur

System Sensor

System Sensor M200WC-RF Mode d’emploi

Philips

Philips PDIUSBD12 Manuel d'utilisation

KNX

KNX Module IC-USB-S.1 Manuel utilisateur

Velleman

Velleman KSR10/USB Manuel utilisateur

NIEUWKOOP

NIEUWKOOP RG7100 Guide d'installation

Alldaq

Alldaq ADQ-USB 2.0-ISO Manuel utilisateur

Thorsis Technologies

Thorsis Technologies isDNet USB Manuel utilisateur

Thorsis Technologies

Thorsis Technologies isHRT USB Manuel utilisateur

microHAM

microHAM DigiKeyer Manuel utilisateur

Apogee

Apogee Jam X Manuel utilisateur

RigExpert

RigExpert TI-3000 Manuel utilisateur

microHAM

microHAM USB Interface II Manuel utilisateur