3
LS-Node
LIghtShark series user manual
By WorkPro
Equipson S.A.
Copyright
© Equipson SA 2018, All rights reserved.
No part of this manual, including the products or software described herein, may be reproduced, transmitted,
or translated into any language in any form or by any means without the express prior written consent of
Equipson S.A.
The guarantee of the product or service will not be extended if: (1) the product is repaired, modied or
altered, unless the repair, modication or alteration is authorized in writing by Equipson SA; (2) the serial
number of the product cannot be clearly read or is not present.
EQUIPSON SA PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTIES OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES, MARKET
CONDITIONS OR ADJUSTMENTS FOR ANY PURPOSE. IN NO EVENT SHALL EQUIPSON SA, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY DAMAGES, WHETHER
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL (INCLUDING DAMAGES FOR LOSS OF
PROFITS, BUSINESS, LOSS OF USE OR DATA, BUSINESS INTERRUPTION OR THE LIKE), EVEN IF
EQUIPSON SA HAS BEEN ADVISED THAT THE POSSIBILITY OF SUCH DAMAGES MAY ARISE FROM
ANY DEFECT OR ERROR IN ITS MANUALS OR PRODUCTS.
THE SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FOR INFORMATIONAL
PURPOSES ONLY AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE AND MAY NOT
BE USED AS A COMMITMENT BY EQUIPSON SA. EQUIPSON SA ASSUMES NO RESPONSIBILITY FOR
ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE
PRODUCTS AND/OR THE SOFTWARE DESCRIBED IN IT.
The products and corporate names appearing in this manual may (or may not) be trademarks or copyrights
of their respective companies, and are used herein only for identication or explanatory purposes and for the
benet of the owner, without intent to infringe such standards.
Policy
This equipment complies with EMC Directive 2004/108/EC and LVD 2006/95/EC.
This product is approved by the following safety standards: EN 60950~1:2006 + A11:2009 + A1:2010 +
A12:2011 + A2:2013
AND EMC standards EN55022: 2010 EN61000-3-3: 2013 EN55020:2007+ A11 EN61000-4-2: 2009
EN61000-4-3: 2006 + A1+ A2
ATTENTION: Any modication or change made to this device, unless explicitly approved by Equipson SA,
will void the authorization to use this device.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
For further details please contact: Equipson SA, AV El Saler nº14, Silla, Valencia, Spain. Telephone: +34
