Woodmizer Sawmill Mode d’emploi

Wood-Mizer® Sawmill

Safety, Operation, Maintenance, &

Parts Manual

TD1 Transfer Deck rev. A1.00 - A4.00

Safety is our #1 concern! Read and understand

all safety information and instructions before oper-

ating, setting up or maintaining this machine.

June 2001

Form #1062

Table of Contents Section-Page

ii TD02doc072519 Table of Contents

SECTION 1 SAFETY 1-1

1.1 Safety Symbols.......................................................................................1-1

1.2 Safety Instructions..................................................................................1-2

SECTION 2 GENERAL INFORMATION 2-1

2.1 Transfer Deck Components....................................................................2-1

2.2 Overall Dimensions ................................................................................2-2

SECTION 3 INSTALLATION & SETUP 3-1

3.1 Installation ..............................................................................................3-1

3.2 Air Installation........................................................................................3-8

3.3 Setup .....................................................................................................3-10

3.4 Electrical Installation............................................................................3-12

3.5 Board Stop Adjustment ........................................................................3-15

SECTION 4 OPERATION 4-1

4.1 Control Box Operation ...........................................................................4-1

4.2 Swing Stop..............................................................................................4-3

SECTION 5 REPLACEMENT PARTS 5-1

5.1 Table Assembly......................................................................................5-1

5.2 Board Stop/Air Bag Assembly ...............................................................5-3

TD1 Rev. A4.00

5.3 Board Stop/Air Bag Assembly ...............................................................5-5

TD1 Rev. A1.00 - A3.01

5.4 Kicker & Air Cylinder............................................................................5-7

5.5 Lower Frame ..........................................................................................5-8

5.6 Swing Stop............................................................................................5-10

5.7 Control Box ..........................................................................................5-11

5.8 Photo Sensors .......................................................................................5-12

TD1 Retrofit

5.9 Photo Sensors .......................................................................................5-14

TD1 Rev. A1.00 - A4.00

SECTION 6 ELECTRICAL INFORMATION 6-1

6.1 Electrical Diagrams ................................................................................6-1

6.2 Electrical Component List......................................................................6-2

INDEX I

TOC

Safety

Safety Symbols

Safety TD02doc072519 1-1

SECTION 1 SAFETY

1.1 Safety Symbols

The following symbols and signal words call your attention to instructions concerning your

personal safety. Be sure to observe and follow these instructions.

DANGER! indicates an imminently hazardous situation

which, if not avoided, will result in death or serious injury.

WARNING! suggests a potentially hazardous situation

which, if not avoided, could result in death or serious injury.

CAUTION! refers to potentially hazardous situations which,

if not avoided, may result in minor or moderate injury or

damage to equipment.

IMPORTANT! indicates vital information.

NOTE: gives helpful information.

Warning stripes are placed on areas where a single decal

would be insufficient. To avoid serious injury, keep out of

the path of any equipment marked with warning stripes.

Safety

Safety Instructions

1-2 TD02doc072519 Safety

1.2 Safety Instructions

NOTE: ONLY safety instructions regarding personal injury are listed in this section. Cau-

tion statements regarding only equipment damage appear where applicable throughout

the manual.

WARNING! Clean sawdust from all guards, vents, con-

trol boxes, or any area where sawdust may gather after

every shift. Failure to do so may result in fire, causing

death or serious injury.

OBSERVE SAFETY INSTRUCTIONS

IMPORTANT! Read the entire Operator's Manual before operating

the transfer deck. Take notice of all safety warnings throughout this

manual and those posted on the machine. Keep this manual with

this machine at all times, regardless of ownership.

Also read any additional manufacturer’s manuals and observe any

applicable safety instructions including dangers, warnings, and

cautions.

Only persons who have read and understood the entire operator's

manual should operate the transfer deck. The transfer deck is not

intended for use by or around children.

IMPORTANT! It is always the owner's responsibility to comply with

all applicable federal, state and local laws, rules and regulations

regarding the ownership, operation of your Wood-Mizer products.

All Wood-Mizer product owners are encouraged to become thor-

oughly familiar with these applicable laws and comply with them

fully while using the machine.

Safety

Safety Instructions

Safety TD02doc072519 1-3

KEEP TRANSFER DECK AND AREA AROUND TRANSFER DECK CLEAN

DANGER! Maintain a clean and clear path for all necessary move-

ment around the machine and lumber stacking areas. Failure to do

so will result in serious injury.

Safety

Safety Instructions

1-4 TD02doc072519 Safety

CAUTIONS FOR TRANSFER DECK SETUP

WARNING! Securely fasten the feet of the transfer deck to the floor

before operating the machine. Failure to do so may result in seri-

ous injury or death.

CHECK TRANSFER DECK BEFORE OPERATION

DANGER! Make sure all guards and covers are in place and

secured before operating the transfer deck. Failure to do so may

result in serious injury.

KEEP PERSONS AWAY

WARNING! Keep all persons out of the path of moving

equipment and boards while operating transfer deck. Fail-

ure to do so may result in serious injury or death.

Safety

Safety Instructions

Safety TD02doc072519 1-5

USE PROPER PROCEDURE WHEN CONDUCTING MAINTENANCE

DANGER! Make sure all electrical installation, service and/or

maintenance work is performed by a qualified electrician and is in

accordance with applicable electrical codes.

DANGER! Hazardous voltage inside the control box and at the

motor can cause shock, burns, or death. Disconnect and lock out

power supply before servicing! Keep all electrical component cov-

ers closed and securely fastened during operation.

WARNING! Consider all electrical circuits energized and danger-

ous.

WARNING! Never assume or take the word of another person that

the power is off; check it out and lock it out.

WARNING! Do not wear rings, watches, or other jewelry while

working around an open electrical circuit.

General Information

Transfer Deck Components

2-1 TD02doc072519 General Information

SECTION 2 GENERAL INFORMATION

2.1 Transfer Deck Components

The Transfer Deck (TD1) enables you to change the direction of material flow. The trans-

fer deck is also equipped with the kicker system allowing you to separate boards and

cants. The following instructions will guide you in installation, operation, and alignment of

the Transfer Deck.

WARNING! Keep all persons out of the path of moving

equipment and boards while operating transfer deck. Fail-

ure to do so may result in serious injury or death.

See Figure 2-1. The main components of the Transfer Deck are shown below.

FIG. 2-1 TRANSFER DECK (TD1)

Transfer Deck Table

Kicker

Board Stop

Swing Stop Arm

Transfer Deck

Frame

Control Box

Adjustable

Base Leg

TD0022

General Information

Overall Dimensions

General Information TD02doc072519 2-2

2.2 Overall Dimensions

See Figure 2-2. The overall dimensions of the Transfer Deck (TD1) are shown below.

FIG. 2-2 TRANSFER DECK (TD1)

TD0028

Installation & Setup

Installation

3-1 TD02doc072519 Installation & Setup

SECTION 3 INSTALLATION & SETUP

3.1 Installation

This section describes the installation and setup procedures. Make sure the transfer deck

is properly assembled before operating the unit.

To assemble the transfer deck make sure to perform the following steps if necessary:

1. Position the transfer deck cross tube and the right and left transfer deck frames close to

each other. Use three 1/2-13 X 1 1/4 hex head bolts and 1/2-13 hex nylon lock nuts on

each side to install the transfer deck cross tube to the right and left frames. Tighten the

bolts and nuts.

See Figure 3-1.

FIG. 3-1

TD0029

Transfer Deck Left Frame

Transfer Deck Right Frame

Transfer Deck Cross Tube

½-13 Hex Nylon Lock Nut (3)

½-13 X 1 1/4 Hex Head Bolt (3)

½-13 Hex Nylon Lock Nut (3)

½-13 X 1 1/4 Hex Head Bolt (3)

Table des matières

Autres manuels woodmizer Matériel agricole

woodmizer

woodmizer LT70L DH WIDE Instruction manuelle

Manuels Matériel agricole populaires d'autres marques

GSi

GSi PNEG-2314 Manuel utilisateur

Checchi & Magli

Checchi & Magli TEXDRIVE Manuel utilisateur

Amazone

Amazone Cenius 4003-2TX Manuel utilisateur

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manuel utilisateur

Cima

Cima BLITZ Instructions d'utilisation et d'entretien

Amazone

Amazone CombiDisc 3000 Instructions d'installation

HE-VA

HE-VA Disc-Roller XL Contour Manuel utilisateur

AGT

AGT AGT-SSFM Manuel utilisateur

Milestone

Milestone 72-84 Manuel utilisateur

KUHN

KUHN Hector 3000 Manuel utilisateur

Krone

Krone X-Disc 6200 Manuel utilisateur

Eliet

Eliet DZC450 Manuel utilisateur

Taarup

Taarup BIO+ B4000 Manuel utilisateur

Garland

Garland SHAKER 310 DPG Manuel utilisateur

stable comfort

stable comfort StableWall System Manuel utilisateur

Raven

Raven AccuBoom Manuel utilisateur

International

International 710 Manuel utilisateur

Ashland

Ashland HDW-3217-14 Manuel utilisateur

woodmizer Sawmill Mode d’emploi

Manuels Matériel agricole populaires d'autres marques