Wolverine PASS Manuel utilisateur
Wolverine Data
PASS Portable Scanner
User Manual
V1.0
1
Table of Contents
1. Before Using the PASS Battery Powered Portable Scanner ------- 2
Having difficulty using this product? ------------------------------------- 3
2. FCC Notice --------------------------------------------------------------------- 4
3. Packaging Contents --------------------------------------------------------- 4
4. Component Guide ------------------------------------------------------------ 5
5. LCD Screen / Status --------------------------------------------------------- 6
6. Getting Started -----------------------------------------------------------------7
6.1 Install battery ------------------------------------------------------------ 7
6.2 Power on/off the scanner ---------------------------------------------7
6.3 Insert and format a MicroSD memory card ---------------------- 7
6.4 Set system date and time -------------------------------------------- 8
6.5 Calibrate white balance -----------------------------------------------8
6.6 Set color mode and resolution -------------------------------------- 9
6.7 How to scan ------------------------------------------------------------- 9
6.8 LED light indication -------------------------------------------------- 10
7. Connect to Computer ------------------------------------------------------ 10
8. Specifications ---------------------------------------------------------------- 11
9. Computer System Minimum Requirement ----------------------------11
10. Troubleshooting --------------------------------------------------------------12
11. One-Year Limited Warranty (United State Only) --------------------- 12
2
Thank you for purchasing Wolverine PASS Portable Scanner, the device
that gives you the freedom to scan documents, magazines, newspapers,
or books on the fly. This stand-alone unit is easy to operate, it saves all
your scans directly to a Micro-SD memory card; no computer or software
is required.
Please take a moment to read through this manual. Its contents may
help you to get the best use of the scanner.
1. Before Using the PASS Portable Scanner
This section provides important safety information that you should read
before operating your PASS scanner.
Do not drop or handle aggressively as it may cause damage
to the device.
Do not allow the device to come into contact with water or
other liquids. In the event that water or other liquids enters the
interior, immediately turn off the device. Continue using the
device may result in fire or electrical shock.
Do not handle the device with wet hands. Doing so may
cause electrical shock and damages to the unit.
Do not place the device close to any equipment generating
strong electromagnetic fields. Exposure to strong magnetic
fields may cause malfunction or data corruption.
Do not expose the device to extreme temperatures, humidity
or vibrations, which may cause damage to the device.
Do not move or disconnect the device from the computer
while the device is reading/writing data. This may cause
damage to the data and/or the device.
3
Under no circumstances should user try to repair the device.
Doing so may cause electrical shock and void the warranty.
Warranty will be void if the device is mishandled. Please take care in
handling the PASS Portable Scanner. Wolverine Data is not responsible
for consequential damages, including loss of data. Always back up all
data. For full warranty statement see the end of this manual.
Wolverine Data has no obligation to repair, replace or issue refunds
without a Return Merchandise Authorization (RMA) number and the
original purchase receipt of the defective product.
Repairs or replacement service will not be offered to Products that were
misused, repaired without authorization, or for operations beyond the
range of intended use.
Product replacements may be either new or refurbished, provided that
the replacement has functionality at least equal to that of the product
being replaced.
Wolverine Data is not responsible for any data stored on the returned
product, please backup any data prior to shipping the unit.
All OUT OF WARRANTY repairs maybe subject to repair fee. Please
contact your dealer or Wolverine Data for current charges.
Having difficulty using this product?
Please try the following options:
Call us at 949-458-9888 M-F 9:00-5:00 Pacific Time.
Visit www.wolverinedata.com/support to find the latest
documentation and other help tips.
E-mail or write to our technical support staff at
support@wolverinedata.com or to our address:
9939 Muirlands Blvd. Irvine, CA 92618.
4
2. FCC Notice
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
To comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules, this device, when needed, must only be connected to
computer equipment certified to comply with the Class B limits.
3. Packaging Contents
PASS Portable scanner
USB cable
Carry bag
Calibration card
Cleaning cloth
User Manual
MicroSD memory card (not supplied)
2xAA alkaline batteries (not supplied)
5
4. Component Guide
Item
Name
Functions
1
Battery door
For 2xAA alkaline batteries
2
POWER/SCAN
Power on/off: Press and hold this button for 2
seconds to turn power on or off.
In power on mode, press this button start
scan; press this button again to stop
scanning.
3
C/BW button
Select Color or Mono scan.
4
DPI button
(Resolution)
Select High (600dpi) or Low (300dpi)
resolution.
5
LCD screen
Scan status display
6
ERR LED
Indicator
Over speed: Red LED on
7
SCAN LED
indicator
Ready for scan: Green LED on
8
TIME SET hole
Setup system time
9
USB port
Upload files to computer via USB cable
10
MicroSD slot
MicroSD memory card, storage Max. 32GB
11
FORMAT hole
Format MicroSD card
6
5. LCD Screen / Status
Item
Function
Description
1
SD card indicator
Files will be stored in MicroSD card
Storage: Micro-SD Card max 32GB
2
Battery indicator
Battery --- full
Battery --- empty
3
Effect indicator
Color or Mono
4
Counting indicator
Quantity of scanned files in MicroSD
5
Selected resolution
High: 600dpi; Low: 300dpi
7
6. Getting Started
6.1 Install battery
1) Slide battery door outward. Please
see the picture.
2) Insert 2 x AA batteries (not supplied)
into the battery compartment
according to the polarities shown in the compartment.
6.2 Power on/off the scanner
Press and hold Power/Scan button for 2~3 seconds to turn on/off
the scanner.
6.3 Insert and format a MicroSD memory card
You need to use a MicroSD card to record and store the scanned
files. The scanner supports the capacity up to 32GB. The MicroSD
card must be formatted before the first scanning.
1) Turn off the scanner.
2) Insert MicroSD card (not supplied) with gold contacts
facing up. Gently push the card all the way in until
latched. Do not force the
card into the slot; forcing
may damage the
scanner and the
MicroSD memory card.
Please see the picture.
3) Power on the scanner.
4) Use the tip of a paper clip to press “FORMAT” hole. “F”
will show on the LCD.
5) Press Power/Scan button to start formatting the card.
6) SD card indicator will be blinking until formatting is
completed.
8
6.4 Set system date and time
1) Power on the scanner.
2) Use the tip of a paper clip to press “TIME SET” hole.
3) The item # has 1 to 5 in sequence, represents Year(1),
Month(2), Day(3), Hour(4), and Minute(5) accordingly. Press
C/BW (increasing) or DPI button (decreasing) to change the
settings. After each item is set, press Scan button to confirm
the change. When finished all 5 settings, use paper clip to
press “TIME SET” hole again to complete the process.
6.5 Calibrate white balance
1) Place the white balance calibration paper that comes with the
scanner on a flat surface.
2) Place the scanner on top of the white paper then power it on.
3) Press and hold C/BW button then press SCAN button once.
While SD symbol starts flashing, release C/BW button.
4) After SD symbol flashed for a few seconds, both green and
red LED lights will come on.
5) Don’t move the scanner and wait for the red LED to go off,
9
and then slide the scanner across on the white area back and
forth slowly and smoothly until the green LED goes off.
6) The white color balance calibration is completed.
7) Repeat the calibration process as needed.
6.6 Set color mode and resolution
The default settings are in COLOR mode and LOW resolution.
Press DPI button to select resolution in HIGH or LOW. And press
C/BW button to select color in COLOR or MONO mode.
6.7 How to scan
1) Use dry cleaning cloth (included) to clean scanner glass each
time before use.
2) Place document on a flat surface, or have
a cardboard support the back of page for
magazines or books. Press and hold
document firmly with one hand.
3) Place scanner on the start position (i.e. at the top of the page.)
4) Hold scanner firmly and press the SCAN button once to start
scanning.
5) Slide scanner downward slowly and steadily to get the best
quality picture.
6) Press SCAN button to stop scanning.
*** We strongly recommend slide the scanner in
downward direction with steady hand motion to achieve best result
and smooth scan.
Table des matières
Autres manuels Wolverine Scanner
