WIT-COLOR ULTRA 9600 Manuel utilisateur

ULTRA 9600

EPSON DX9

We’d like to express our sincere congratulations on your having a high capability

eco-solvent printer——Ultra 9600 1602S, and also appreciation for your support to

WIT-COLOR products. Please read this manual carefully,which can help you to solve the

problems encountered in the course. The table of contents can help you find the relevant

section needed.

Attention

WIT-COLOR is the trademark of Shanghai Wit-Color Digital Science &

Technology Co., Ltd. Wit-Color has the copyright of Ultra 1000,Ultra 2000, Ultra 3000,

Ultra 4000, Ultra 9000, Ultra 9100 ,Ultra 9200 solvent printer and eco-solvent printer,

including every spare parts, boards and software. Any copy by company or individual is

not allowed. Without authorization, this manual shall not be reprinted or propagated.

Ultra 9600 series printer has passed 3Q Conformity ofQuality Management System

Certification and ISO9001 Quality Certification. Ultra 9600 series printer is up to the

standard of printing equipment. Please pay attention to the following working

environment when you use the printer.

1. Please keep the printer away from electromagnetism environment: television,

high speed electric machine, high voltage cable, mobile phone, radio etc. These

equipments will produce magnetic interference.

2. Please keep the room temperature between 10 and 40 Celsius degree while printer

is working. Too high or too low temperature will reduce the printer’s using life and affect

the quality of the image.

3. The room should be in smooth ground with ground wire connection.

4. Please avoid direct sunlight and keep printer in ventilation and favorable

humidity.

5. Please keep the room clean, and avoid operating the machine under dust.

Displacement is inevitable during transportation. In this case, the engineer will

adjust it. You can not return or ask for compensation according to this issue.

Within the warranty time, WIT-COLOR provides maintenance and technical support

except the damage caused by human, bilging and thunderstrike. Please read the manual

carefully. Any question, please contact WIT-COLOR after-sales service department for

support.

Please don’t dismantle the printer privately. When the printer is in high-speed

operation, please pay attention to the safety symbols to avoid unnecessary injury. Out of

WIT-COLOR also provide out-of-warranty printer maintenance according to the

agreement.

Specification is subject to change without prior notice.

The involved description, color and model of printer only takes the reference. The

exact configurations of equipment are subject to the real product.

Caution: Please obey the above description to avoid unnecessary issue.

TechnicalFeatures:

Epson generation 9th print head----DX9 print head

Ultra 9600 series printer adopts Epson DX9 print head which is newest four-in-one

EPSON PIEZO print head with 6 lines nozzles. Each line contains 180 nozzles with total 1080

nozzles. Upgraded on the basis of DX7 print head, DX9 print head possesses a higher fire

frequency and a more secure circuit design.

Gray Scale Variable Ink Drop Technology.

Ultra 9600 printers adopt Gray Scale controlling system which can generate 3 kinds of

drop volume with the minimum drop volume of 3.5pl. Thus the printing effect could be

more precise and vivid.

Fault-Tolerant Feather Technology

The most advanced fault-tolerate feather technology, developed by WIT-COLOR team,

realizes the gradient printing instead of linear printing. Due to the constitution of gradient

ink dot, fault-tolerant feather technology can effectively remove the stripe, thus

perfecting the picture.

LCD Control Panel

With LCD control panel, the printer could be operated to fulfill a series of convenient

maintenance like head-cleaning, ink-sucking, flashing media-feeding, media-retreating

and resetting.

USB Control Board

Equipped with USB control board and USB2.0, the printer is connected to the computer

via USB data cable. Meanwhile, the built-in memory chips of USB control board

improve the printing speed.

High-speed Motion System

The AC servo motor of the printer has a feature of high speed and high stability. In

mechanical part, the printer adopts imported linear rail, timing belt with steel wire and

copper gear. In the positioning system, the printer can achieve multiple 720 resolution

with180 DPI encoder stripe.

Rapid Heating and Drying System

The printer has two sets of heating system and one set of drying system. Pre-heating

contributes to absorption of ink by opening the coating of material. Post-heating

contributes to rapid coagulation of ink. In the collaboration of heating system and drying

system, each picture could be dried before collected.

Automatic media feeding and collecting system

The automatic media feeding system is designed with photoelectric control. The system

could bear large media like fabric and keep media moving in parallel. With passive media

collecting system, the printer achieves low energy consumption when bearing the light

media.

Symbols:

Please pay attention to the following symbols in the course of reading

Incorrect operation, which will result in serious problems. Please read

carefully to avoid incorrect operation.

Warning operation, which will damage printer. Please follow the

instructions carefully.

Hinting operation, which points out some details.

Chapter One

Wooden Package Dimension:

Length*Width*Height: 2.82*0.82*0.80m

Printer Dimension:

Length*Width*Height: 2.70*0.72*1.30m

There must be enough space around the printer, at least 1.2meters for before and back, at

least 50 centimeter for left and right .

Power Supply:

1, Connect ground wire correctly. Use independent power supply and avoid sharing the

same ground wire or socket with other equipment

2, Power supply: AC supply 220V AC 50Hz （±10%）

3, Maximum power supply is 1200W; UPS power supply is more than 2000W.

4, Don’t use damaged wire line. The service power of wire line shall be above 3000W.

5, Don’t use extensive USB cable and the USB cable shall be screened.

6, Turn off all switches, and then connect the power supply cables or unplug the power .

Environment:

1, Please keep away from magnetic equipments and leave enough space around the

printer.

2, Please keep the room dust-free and suitable temperature.

3, The printer should be on the smooth ground. Do not tilt the printer, which will result in

deviation of media feeding.

4, Please avoid floors prone to vibration like aisle. Keep air in circulation.

5, Please keep away from direct sunlight or heat source. Stable temperature guarantee

stable chip operation.

6, Required temperature: 10-35℃; Required humidity: 30%-80%. Improper temperature

will reduce the printing effect.

7, Keep away from all the corrosive liquid and gas.

Please follow the correct operation.

Notice of Devanning

The equipment is packed in a wooden case. Qualified operator and Screwdriver are

required.

1, The gross weight of equipment is 300kg. Please remove with forklift.

2, Wear gloves when operating to avoid unnecessary injury.

3, Remove all the screws from up to down.

4, Do not discard screws.

Open the wooden package, and then unscrew the printer body to move the machine.

Cautions in moving printer

1, At least 6 people required.

2, Carry the body of the machine instead of bilateral chassis.

3, Do not left anything in the printer. Lock the side cover after checking.

4, Lift lightly with no collision.

Lift lightly to avoid printer deformation.

Notice of Ink:

1, Please keep the ink bottle away from the children, the pregnant and the elders.

2, If ink drops on the skin, wash with soap and water. If ink is splashed into eyes,

rinse immediately. Seek medical advice in time if feeling not good.

3, Store in a cool and dark environment.

4, Use ink in two month if the bottle is opened to achieve better printing effect.

5, Do not completely open the ink bottle. A small cut on the sealed bellows is enough.

6, Do not shake the ink bottle, or the ink will leak out.

7, Do not litter wastes.

8, Keep ink dust-free.

Do not litter ink wastes for the sake of others and environment.

Keep ink dust-free to avoid print head blocking.

Chapter Two

Details of Printer

Framework of printer

Table des matières

Autres manuels WIT-COLOR Imprimante

WIT-COLOR

WIT-COLOR Ultra-9000 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur