Wisenet SHD-3000F4 Manuel utilisateur

In-ceiling Housing

Installation Manual

SHD-3000F4

2_ SHD-3000F4

Overview 3

What’s Included 3

Installation Instructions 4

Installation

(indoor type) 4

Installation

(outdoor type) 8

Product Specifications 12

TABLE OF CONTENTS

SHD-3000F4 _3

ENG

OVERVIEW

This In-CEILING HOUSING is a mounting ADAPTOR that is designed to mount the smart

dome camera in built-in style on a double-layer ceiling.

WHAT’S INCLUDED

HOUSING SAFETY BRACKET (

1EA)

SAFETY WIRE (1SET)

WARRANTY

TEMPLATE (1EA)

outdoor type (3EA)

indoor type (2EA)

Lower bracket (exclusively for

indoor dome cameras) (1EA)

In-ceiling Housing

Installation Manual

SHD-3000F4

INSTALLATION MANUAL

4_ SHD-3000F4

INSTALLATION INSTRUCTIONS

1. Select an installation position or place that can endure more than 4 times of the total weight

of the installation structure.

2. At least 250mm or more of spare height is required above the CEILING BOARD.

3. CEILING BOARD’s thickness should be less than 40mm.

4. Be sure to secure the SAFETY WIRE to avoid a product fall.

5. If you want to attach the camera to the ADAPTOR, use the only provided SCREWS.

INSTALLATION

(INDOOR typE)

1. Place the tEMpLAtE on the CEILING BOARD and drill a guided hole.

❶ Remove the round filling (“C”) from the tEMpLAtE.

2 Place TEMPLATE A onto the CEILING BOARD to which you will attach the ceiling

mount ADAPTOR and drill a hole of Ø198mm in diameter.

See the figure below for the hole shape.

More than 250mm

CEILING BOARD Less than 40mm

TEMPLATE

CEILING BOARD

SHD-3000F4 _5

ENG

2. Fix the ANCHOR BOLt onto the concrete CEILING, and secure the SAFEty WIRE to the

ANCHOR BOLt as below:

❶ Tighten the nut (“N1”) on the ANCHOR BOLt.

2 Insert the provided SAFEty BRACKEt into the ANCHOR BOLt.

3 Tighten two nuts (“N2”,”N3”) onto the ANCHOR BOLt.

4 Hook and fix one end of the SAFEty WIRE onto the SAFEty BRACKEt.

5 Hook and fix the other end of SAFEty WIRE onto the HOUSING as shown below.

3. To connect to the camera, insert the external cable through the side hole on the housing

to the inside of the housing as shown in the figure.

`Refer to the installation manual of the camera that you want to install, and prepare necessary

cables for camera connection.



The ANCHOR BOLTs and nuts are optional and not included in the product package.

ANCHOR BOLT

Nut (N1)

Safety BRACKET

Nut (N2,N3)

SAFETY WIRE

ANCHOR BOLT

HOUSING

CEILING

Hole HOUSING

HOUSING

External Cable

6_ SHD-3000F4

4. Push the HOUSING inside the CEILING through the CEILING hole, and tighten the

SCREWs (x2) clockwise to fix the HOUSING on the CEILING.

(The BRACKEt will be positioned from <A> to <B> as shown.)

`Ensure that the HOUSING is firmly secured to the CEILING BOARD.

5. Combine the dome camera and the bracket using two screws.

Lower bracket is exclusively for indoor use.

INSTALLATION

(INDOOR typE)

BRACKET

SCREW

Turn clockwise

HOUSING

BRACKET

<A> <B>

SHD-3000F4 _7

ENG

6. Insert the bracket where the camera is mounted into the housing and fix it by turning it in

the LOCK direction.

`When the installation is completed, remove both PROTECTIVE TAPE and PRETOECTIVE COVER

from the lens.

7. Attach the COVER to the HOUSING.

CEILING

HOUSING

Cover

8_ SHD-3000F4

INSTALLATION

(OUtDOOR typE)

1. Place the TEMPLATE on the CEILING BOARD and drill a guided hole.

❶ Remove the round filling (“C”) from the TEMPLATE.

2 Place the TEMPLATE A onto the CEILING BOARD to which you will attach the

CEILING mount ADAPTOR and drill a Ø198mm hole.

See the figure below for the hole shape.

2. Fix the ANCHOR BOLT onto the concrete CEILING, and secure the SAFETY WIRE to the

ANCHOR BOLT as below:

❶ Tighten the NUT (“N1”) on the ANCHOR BOLT.

2 Insert the provided SAFETY BRACKET into the ANCHOR BOLT.

3 Tighten two NUTs (“N2”,”N3”) onto the ANCHOR BOLT.

4 Hook and fix one end of the SAFETY WIRE onto the SAFETY BRACKET.

5 Hook and fix the other end of SAFETY WIRE onto the HOUSING as shown below:



The ANCHOR BOLTs and nuts are optional and not included in the product package.

ANCHOR BOLT

CEILING

Nut (N1)

Safety BRACKET

Nut (N2,N3)

SAFETY WIRE

ANCHOR BOLT

HOUSING

CEILING

CEILING BOARD

TEMPLATE

SHD-3000F4 _9

ENG

3. To connect to the camera, insert the external cable through the side hole on the housing

to the inside of the housing as shown in the figure.

`Refer to the installation manual of the camera that you want to install, and prepare necessary

cables for camera connection.

4. Push the HOUSING inside the CEILING through the CEILING hole, and tighten the

SCREWs (x2) clockwise to fix the HOUSING on the CEILING.

(The BRACKET will be positioned from <A> to <B> as shown.)

`Ensure that the HOUSING is firmly secured to the CEILING BOARD.

CEILING

HOLE HOUSING

BRACKET

SCREW

Turn clockwise

HOUSING

BRACKET

<B><A>

BRACKET

10_ SHD-3000F4

5. As shown in the figure, pull out the protrusions of the rubber cap in the bottom to make a

small hole and remove the cable through it to connect to the external cable.

`If waterproofing in the connected cable jacket is poor, it may cause leaks. Make sure you tape it

tight and thoroughly.

`The butyl rubber tape for waterproofing can extend at least twice as long as the original length.

INSTALLATION

(OUtDOOR typE)

Alarm Cable

Audio

Power

Table des matières

Autres manuels Wisenet Accessoires pour appareils photo

Wisenet

Wisenet SHD-3000F5 Manuel utilisateur

Wisenet

Wisenet SHB-4300HP Manuel utilisateur

Wisenet

Wisenet SHB-4301HP Manuel utilisateur

Wisenet

Wisenet SHB-D-9000H Manuel utilisateur

Wisenet

Wisenet SKY Manuel utilisateur

Wisenet

Wisenet SHD-3000F1 Manuel utilisateur

Wisenet

Wisenet SHB-9000H Manuel utilisateur

Wisenet

Wisenet SHD-3000F2 Manuel utilisateur

Manuels Accessoires pour appareils photo populaires d'autres marques

Viltrox

Viltrox EF-NEX Instructions d'installation

Calumet

Calumet 7100 Series CK7114 Manuel utilisateur

Ropox

Ropox 4Single Series Manuel utilisateur

Cambo

Cambo Wide DS Digital Series Mode d'emploi

Samsung

Samsung SHG-120 Manuel utilisateur

Ryobi

Ryobi BPL-1820 Manuel d'utilisation

Aegis

Aegis ABL-36020P Manuel utilisateur

Pentax

Pentax Data Back Fc Manuel utilisateur

Fantasea

Fantasea EyeGrabber F Series Manuel utilisateur

Honeywell

Honeywell HDZ20HD Manuel utilisateur

EGO

EGO BA1400T Manuel utilisateur

Sima

Sima SRW-62 Manuel utilisateur

Shape

Shape A7SSMKIT Manuel utilisateur

Slide Kamera

Slide Kamera HST-2 Manuel utilisateur

Power works

Power works 2902613 Manuel utilisateur

SES

SES SE-2047-2 Manuel utilisateur

Olympus

Olympus PT-EP05L Manuel utilisateur

Starlite

Starlite OctoDome nxt Manuel utilisateur