Wiselion WBS-T007 Manuel utilisateur
QuickStart Guide
Wiselion WBS-T007
Quick Start Guide
Introduction
The device needs to be adjusted for maximum accuracy before first use.
Please follow the instructions provided here.
Measure your temperature with another direct contact thermometer you trust.
Then measure your temperature with the Wiselion digital thermometer.
If for example the temperature of the digital thermometer has a deviation of +0.5 οC
from your thermometer then set -0.5 οC (step 4) .
Quick Start Guide
Step 1
Press here to activate the device.
Press the “Set button” for about 3 seconds. After you release the
button, the screen will be as showed.
Quick Start Guide
Step 2
Press the “Set” button two (2) times.
The screen will show the below indication. (F3)
Quick Start Guide
Step 3
Press the ““+” & “-” in order to adjust the setting to the desired value
according to the deviation.
Quick Start Guide
Step 4
Finally press the “Set button” two (2) times to complete the set up.
Quick Start Guide
Step 5
Τhank you
Autres manuels pour WBS-T007
1
Autres manuels Wiselion Thermomètre
