Wireless Prime VR 3D PLAYER Guide produit
360º VEHICLE SURROUND
VIEW MONITORING SYSTEM
MANUAL BOOK
© 2017 Wireless Prime INC. All Rights Reserved.
Contents
Introduction
Product Features
Specifications
Instructions
Installation Instructions
Bus Installation
Truck Installation
Host Device Installation
Remote Control Instructions
Camera Calibration
Calibration for Buses and Trucks
Position Calibration
Merging Calculation
Function Settings
Interface Settings
Upgrade and Restore
Other Settings
Video Settings
Video Recording Functions
Smart Power Management
Disclaimers
About Wireless Prime
© 2017 Wireless Prime INC. All Rights Reserved. 1
2
3
4
5
5
7
8
9
9
10
10
11
12
12
12
12
13
13
13
13
16
15
Introduction
© 2017 Wireless Prime INC. All Rights Reserved. 2
Safety Tips
This guide is to provide users with an understanding of the system installation
procedure, camera calibration steps, and interaction with the system menu.
The VR3D Player 360º Vehicle Surround View Monitoring System synthesizes images
from four cameras to create a true 3D view of a vehicle's surroundings. The technology
enables flexible omni-directional monitoring around a vehicle from a dynamically
definable perspective or "free eye point." This technology is able to capture a complete
360º view surrounding the vehicle, eliminating blind spots for safe driving and parking.
This system offers various SVM configurations such as -HDMI/LVDS/AV with either 2D
or 3D, as well as integrated four channel car DVR function with 24-hour video loop
recording supported.
Please read this manual carefully before using.
Serious traffic accidents may be caused by constant viewing of the screen or by
operating the system while driving.
SVM is a parking and driving assistant system which offers full view of the vehicle’s
surrounding, eliminating blind spots and providing a guide for safe driving and parking.
There may be inconsistencies between the image on the screen and the surroundings
of the vehicle. Please use caution when driving with this system.
Never hotplug the host device when power is connected. The host device cannot be
exposed to liquid. Please pay attention to heat dissipation.
Please contact professional installation service providers in case of any abnormal
situations.
Product Features
© 2017 Wireless Prime INC. All Rights Reserved. 3
4X 180º ultra-wide fish-eye cameras.
Seamless video merging based on dual core ARM CPU and hardware
high-efficiency acceleration engine.
Choose between Arbitrary and dynamic 3D mode view angle for better view of
surrounding environment.
Independent fish-eye calibration parameter and algorithm for each camera.
Pixel statistic engine for realtime brightness balance across four camera channels.
3D video de-interlacing and noise reduction technology for CVBS signal decoding.
Supports alternative recording media for TF card or USB disk.
Simple calibration with calibration tape and packing box, applicable for almost all
types of vehicles including buses, trucks, lorries, limousines, tanks, and even jumbo
jets. Typical length of the vehicle is 5.5m, 6.5m, 10m & 13m.
Smart power management for conserving vehicle battery.
High video recording resolution up to 1440x960.
OE quality for main chipset with protected circuit and devices to provide the best
system performance and stability.
Specifications
© 2017 Wireless Prime INC. All Rights Reserved. 4
TYPE SPECIFICATION
Video
Video Interface
Input / Output Impedance
Amplitude
Mini plug connector
75Ω
Typical 1Vpp, 1.2Vpp Maximum
8MHz
13.5MHz
<0.8°TYP
<3%TYP
70dB
Optional
Yes
Yes
Bosch
H.264 [email protected]
1440*960@30fps
5Mbps，3Gbyte/Hour
USB Disk(High Priority)/TF
32G SDIO3.0/SDIO2.0
32G USB2.0
600mA
440mA
<10mA
123*81*25mm(Host Metal box)
220g
-20℃~+85℃
-40℃~+105℃
0~95%
Bandwidth
Sampling Frequency
DP(Differential Phase)
DG(Differential Gain)
SNR
High beam
Left/Right Turning Blinker
Reversing Lamp
BM250E
Algorithm
Resolution
Bitrates
Recording Media
TF CARD
USB Disk
4-CH DVR + SVM mode
4-CH DVR mode
Sleep Mode
L*W*H
Normal Working
Storage
Relative Humidity
Indicator Lamp
/Blinker
G-sensor
Compression
Disk Capacity
Power Consumption
Dimension
Weight
Environments
Voltage Tolerance Working Voltage 9.5V~36V
1) Wire Routing Inside the Car
Please refer to wiring diagram for more details.
Please pay close attention to the color and connector size of each extending
cable. Wire routing should be installed from cameras to the host device side. All
the cables should be gathered to the host device side.
2) Camera Installation
Please refer to the corresponding section for detailed installation steps.
Embedded or out-cell installation for side cameras depends on the size of the
side mirrors as well as the space available for installation, especially for large
vehicles. Proceed with caution when dissasembling the side mirrors or drilling
installation holes to ensure that they do not break.
3) Host Installation
It is strongly recommended that the host be installed inside or behind the tool
cabinet, as this will ensure that the TF card or USB disk is easily accessible.
4) Wiring Test
Double check all of the wire connections before turning on the power. Do not
plug in live connections.
5) Functional Test
Test the main functions and settings of the host device.
6) Side Camera’s Angle Adjustment
Adjust the camera to select the proper angle at which side calibration tape is
overlapping with the reference guide line on the screen.
7) Camera Calibration
Step-by-step camera calibration can be accessed in the system menu. Once the
calibration data is completely collected, the system software will automatically
complete the video merging.
Instructions
© 2017 Wireless Prime INC. All Rights Reserved. 5
Installation Instructions
8) Device Fixing
Fix the wire connections, cameras and host device.
9) Reconversion
Recover all the parts of the vehicle.
NOTE: Please install in cable extension kit in the proper order according
to the vehicle length. Standard extension cable lengths are as listed:
Front Camera: 4M*2
Rear Camera: 6.45M*2
Left Camera: 3.45M*2
Right Camera: 3.45M*2
Instructions
© 2017 Wireless Prime INC. All Rights Reserved. 6
Host Device
01 02 03 04
05 06 07 08
09 11
10
13 14 15 16
DVD Trigger
(Front CAM)
Camera
extend
cable
(Back CAM) (Left CAM) (Right CAM)
12
AV-OUT
Power Cable
IR Receiver
Pink line ACC
Yellow VBAT+
Black GND
(Left Turning)(Reversing) (Right Turning)
same with
cable 14,
either-or
same with
cable 13,
either-or
(High Beam)
same with
cable 15,
either-or
same with
cable 16,
either-or
！
DO NOT Connect
Reversing Gear
Signal LCD monitor
Instructions
© 2017 Wireless Prime INC. All Rights Reserved. 7
Bus Installation
1 2 3 4 5
Front Camera Left Camera Right CameraLCD Monitor Rear Camera
1
2
3
4
5
0-45º 0-45º
camera angle
Instructions
© 2017 Wireless Prime INC. All Rights Reserved. 8
Truck Installation
12 3 4 5
Front Camera Left Camera Right CameraLCD Monitor Rear Camera
4
1
2
3
5
0-45º 0-45º
camera angle
Instructions
© 2017 Wireless Prime INC. All Rights Reserved. 9
Remote Control Instructions
1
2
3
4
5
6
1) Disassemble the panel of the central control unit, and connect the reversing
video channel of the LCD monitor or other display screen(AV in).
2) For IR mode, put the infrared receiver in the proper position.
3) Please connect the anode of the left/right turning signal from the fuse box to
the host wire harness, or from the side mirror turning LED indicator to the
camera side of the extending cable.
4) Connect the power cable to battery supply line and connect the wire harness
to the host device.
5) Fix the host device in the tool cabinet or the space behind the central control
panel.
6) Connect all the cables for the function testing and debugging process, and
assemble the panel back to the control unit.
Host Device Installation Instructions
Key Number Description Function
[1] MODE
Enter setting menu.
In 3D mode, press and hold for 2 seconds to enter 4CH recording mode.
While in menu screen, toggle through icons.
In SVM mode, press to toggle between high beam mode and SVM mode.
In SVM mode, press and hold to enter 360 rotatable menu.
In SVM mode, press and hold to enter reversing gear mode.
In menu screen, select next menu option.
In SVM mode, press and hold to enter 360 rotatable mode.
Confirm selected option.
UP
RIGHT
DOWN
LEFT
CONFIRM
[2]
[3]
[4]
[5]
[6]
Table des matières
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur