Winmate R05FA3S-OFD1HMHB Manuel utilisateur

Please read these instructions carefully before using this product, and save this manual for future use.

5.7~19” Arm-based HMI

Freescale® Cortex® A9 i.MX6 Dual Core, 1 GHz

Android 6.0

Open Frame

Model No.: R05FA3S-OFD1HMHB

W07FA3S-OFA3HM

W10FA3S-OFH1HM

R15FA3S-OFC3HM

R19FA3S-OFM1HM

User Manual

Document Version 1.1

Document Part Number: 91521110103W

2 Arm-based Open Frame HMI User Manual

Contents

Preface................................................................................................................................. 4

About This User Manual..................................................................................................... 9

Chapter 1: Introduction .................................................................................................... 10

1.1 Introduction ........................................................................................................ 11

1.2 Product Features................................................................................................ 11

1.3 Package Contents.............................................................................................. 11

1.4 Connector Description........................................................................................ 12

1.5 Mechanical Dimensions ..................................................................................... 13

Chapter 2: Getting Started ............................................................................................... 16

2.1 Powering On ...................................................................................................... 17

2.1.1 AC Adapter Components.......................................................................... 17

2.1.2 Power Considerations............................................................................... 17

2.1.3 Connecting the Power .............................................................................. 18

2.2 Connector Description........................................................................................ 19

2.2.1 Power Input Connector............................................................................. 19

2.2.2 Serial Port Connector ............................................................................... 19

2.2.3 Ethernet Connector .................................................................................. 19

2.2.4 USB 2.0 Connector................................................................................... 20

2.2.5 USB OTG Connector................................................................................ 20

2.2.6 CANBus Connector .................................................................................. 20

2.2.7 Micro HDMI Connector............................................................................. 21

2.3 Turning On and Off the HMI Device ................................................................... 21

2.4 Configuring Serial Port Settings ......................................................................... 22

Chapter 3: Mounting ......................................................................................................... 24

3.1 Cable Mounting Considerations ......................................................................... 25

3.2 Safety Precautions ............................................................................................. 25

3.3 Mounting Guide.................................................................................................. 25

3.3.1 Panel Mount ............................................................................................. 26

3.3.2 VESA Mount............................................................................................. 27

Chapter 4: Operating the Device ..................................................................................... 28

4.1 Operating System............................................................................................... 29

4.2 Multi-Touch ........................................................................................................ 29

4.3 System Settings ................................................................................................. 30

4.3.1 Set up the Device ..................................................................................... 30

4.3.2 Home Screen............................................................................................ 30

4.3.3 Quick Settings .......................................................................................... 31

Preface

4.4 Ethernet.............................................................................................................. 32

4.4.1 Configuring Ethernet................................................................................. 33

4.4.2 Checking Ethernet Settings ...................................................................... 34

4.5 Winmate® Home Manager (WHM)..................................................................... 35

4.5.1 How to Lock Applications.......................................................................... 35

4.5.2 How to Unlock Applications ...................................................................... 38

4.5.3 How to Change Password ........................................................................ 39

Chapter 5: Software Installation ...................................................................................... 40

5.1 Android Debug Bridge (ADB) Driver Installation................................................. 41

5.1.1 Disabling Driver Signature on Windows 8................................................. 42

5.1.2 ADB Driver Installation.............................................................................. 46

5.2 Installing Android Debug Bridge (ADB) .............................................................. 50

5.2.1 Installing Android Debug Bridge (ADB)..................................................... 50

5.2.2 Using Android Debug Bridge (ADB) ......................................................... 50

5.3 Downloading Image Tool.................................................................................... 52

5.4 OTA Update Guide............................................................................................. 52

5.5 OS Image Update Guide .................................................................................... 56

Chapter 6: Technical Support .......................................................................................... 57

6.1 Introduction .................................................................................................... - 58 -

6.2 Problem Report Form..................................................................................... - 58 -

Appendix A: Product Specifications ............................................................................... 59

4 Arm-based Open Frame HMI User Manual

Preface

No part of this document may be reproduced, copied, translated, or transmitted in any form or

by any means, electronic or mechanical, for any purpose, without the prior written permission

of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits and/or

software described or contained in this manual in order to improve design and/or performance.

We assume no responsibility or liability for the use of the described product(s) conveys no

license or title under any patent, copyright, or masks work rights to these products, and make

no representations or warranties that these products are free from patent, copyright, or mask

work right infringement, unless otherwise specified. Applications that are described in this

manual are for illustration purposes only. We make no representation or guarantee that such

application will be suitable for the specified use without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and workmanship

defects for a period of one year from the invoice date. If the customer discovers a defect, we

will, at his/her option, repair or replace the defective product at no charge to the customer,

provide it is returned during the warranty period of one year, with transportation charges

prepaid. The returned product must be properly packaged in its original packaging to obtain

warranty service. If the serial number and the product shipping data differ by over 30 days, the

in-warranty service will be made according to the shipping date. In the serial numbers the third

and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g.,

with A for October, B for November and C for December).

For example, the serial number 1W18Axxxxxxxx means October of year 2018.

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

You may need the following information ready before you call:

•Product serial number

•Software (OS, version, application software, etc.)

•Description of complete problem

•The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

Preface

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to

alert you to the potential for hardware damage or personal injury. These are Notes, Important,

Cautions, and Warnings. The following is an example of each type of advisory.

Note:

A note is used to emphasize helpful information

Important:

An important note indicates information that is important for you to know.

Caution/ Attention

A Caution alert indicates potential damage to hardware and explains how to avoid

the potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et explique

comment éviter le problème potentiel.

Warning!/ Avertissement!

An Electrical Shock Warning indicates the potential harm from electrical hazards

and how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur des

emplacements électriques et comment éviter ces problèmes.

Alternating Current Mise à le terre !

The Protective Conductor Terminal (Earth Ground) symbol indicates the potential

risk of serious electrical shock due to improper grounding.

Le symbole de Mise à Terre indique le risqué potential de choc électrique grave

à la terre incorrecte.

6 Arm-based Open Frame HMI User Manual

Safety Information

Warning!/ Avertissement!

Always completely disconnect the power cord from your chassis whenever you

work with the hardware. Do not make connections while the power is on.

Sensitive electronic components can be damaged by sudden power surges.

Only experienced electronics personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous travaillez

sur celui-ci. Ne pas brancher de connections lorsque l’alimentation est

présente. Des composantes électroniques sensibles peuvent être

endommagées par des sauts d’alimentation. Seulement du personnel

expérimenté devrait ouvrir ces chassis.

Caution/ Attention

Always ground yourself to remove any static charge before touching the

CPU card. Modern electronic devices are very sensitive to static electric

charges. As a safety precaution, use a grounding wrist strap at all times.

Place all electronic components in a static-dissipative surface or static-

shielded bag when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge statique

avant de toucher la carte CPU. Les équipements électroniques moderns

sont très sensibles aux décharges d’électricité statique. Toujours utiliser un

bracelet de mise à la terre comme précaution. Placer toutes les

composantes électroniques sur une surface conçue pour dissiper les

charge, ou dans un sac anti-statique lorsqu’elles ne sont pas dans le

chassis.

For your safety carefully read all the safety instructions before using the device. Keep

this user manual for future reference.

•Always disconnect this equipment from any AC outlet before cleaning. Do not use

liquid or spray detergents for cleaning. Use a damp cloth.

•For pluggable equipment, the power outlet must be installed near the equipment

and must be easily accessible.

•Keep this equipment away from humidity.

•Put this equipment on a reliable surface during installation. Dropping it or letting it

fall could cause damage.

•The openings on the enclosure are for air convection and to protect the equipment

from overheating.

•Before connecting the equipment to the power outlet make sure the voltage of the

power source is correct.

•Position the power cord so that people cannot step on it. Do not place anything over

the power cord.

•If the equipment is not used for a long time, disconnect it from the power source to

avoid damage by transient over-voltage.

•Never pour any liquid into an opening. This could cause fire or electrical shock.

•Never open the equipment. For safety reasons, only qualified service personnel

should open the equipment.

•All cautions and warnings on the equipment should be noted.

Preface

*Let service personnel to check the equipment in case any of the following

problems appear:

oThe power cord or plug is damaged.

oLiquid has penetrated into the equipment.

oThe equipment has been exposed to moisture.

oThe equipment does not work well or you cannot get it to work according to

the user manual.

oThe equipment has been dropped and damaged.

oThe equipment has obvious signs of breakage.

•Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the

equipment.

Caution/Attention

Use the recommended mounting apparatus to avoid risk of injury.

Utiliser l’appareil de fixation recommandé pour éliminer le risque de

blessure.

Warning!/ Avertissement!

Only use the connection cords that come with the product. When in doubt,

please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le produit. Si

vous doutez de leur provenance, contactez le manufacturier.

Warning!/ Avertissement!

Always ground yourself against electrostatic damage to the device.

Toujours vérifier votre mise à la terre afin que l’équipement ne se décharge

pas sur vous.

•Cover workstations with approved anti-static material. Use a wrist strap connected

to a work surface and properly grounded tools and equipment.

•Use anti-static mats, heel straps, or air ionizer for added protection.

•Avoid contact with pins, leads, or circuitry.

•Turn off power and input signals before inserting and removing connectors or test

equipment.

•Keep the work area free of non-conductive materials, such as ordinary plastic

assembly aids and Styrofoam.

•Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that

are conductive.

•Always put drivers and PCB’s component side on anti-static foam.

8 Arm-based Open Frame HMI User Manual

Important Information

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at him own expense.

EC Declaration of Conformity

This equipment is in conformity with the requirement of the following EU legislations

and harmonized standards. Product also complies with the Council directions.

Electromagnetic Compatibility Directive (2014/30/EU)

•EN55024: 2010 EN 55022: 2010 Class B

oIEC61000-4-2: 2009

oIEC61000-4-3: 2006+A1: 2007+A2: 2010

oIEC61000-4-4: 2012

oIEC61000-4-5: 2014

oIEC61000-4-6: 2013

oIEC61000-4-8: 2010

oIEC61000-4-11: 2004

•EN55022: 2010/AC:2011

•EN61000-3-2:2014

•EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

•EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

About This User Manual

This User Manual provides information about using the Winmate® Arm-based Open Frame

HMI. This User Manual applies to the Arm-based Open Frame HMI.

The documentation set for the Arm-based Open Frame HMI with Freescale® Cortex® A9 i.MX6

Dual Core provides information for specific user needs, and includes:

•Arm-based Open Frame HMI User Manual – contains detailed description on how to use

the HMI device, its components and features.

Note:

Some pictures in this guide are samples and can differ from actual product.

Models

Screen Size Model Name

5.7 R05FA3S-OFD1HMHB

7” W07FA3S-OFA3HM

10.1” W10FA3S-OFH1HM

15” R15FA3S-OFC3HM

19” R19FA3S-OFM1HM

Document Revision History

Version Date Note

1.0 18-Jan-2019 Initial document release

1.1 29-Jul-2020

Revise panel specifications of the

R15FA3S-OFC3HM

10 Arm-based Open Frame HMI User Manual

Chapter 1: Introduction

This chapter gives you product overview, describes features and

hardware specification. You will find all accessories that come

with the HMI in the packing list. Mechanical dimensions and

drawings included in this chapter.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Winmate Écran tactile

Winmate

Winmate 7'' S-Series Manuel utilisateur

Winmate

Winmate G-WIN Slim IP65 Manuel utilisateur

Winmate

Winmate M-Series Manuel utilisateur

Winmate

Winmate W10FA3S-GSH1 Manuel utilisateur

Winmate

Winmate G-WIN Manuel utilisateur

Winmate

Winmate W10IB3S-PCH2AC-PoE S-Series Manuel utilisateur

Winmate

Winmate W07IB3S-POT1 Manuel utilisateur

Winmate

Winmate GC Series Manuel utilisateur

Winmate

Winmate R15IH3S-MRA3FP Manuel utilisateur

Winmate

Winmate ARM-11 HMI Series Manuel utilisateur

Winmate

Winmate W04FA3S-EHT1 Manuel utilisateur

Winmate

Winmate R15IW3S-SPC3 Manuel utilisateur

Winmate

Winmate R19IK3S-SPM169 Manuel utilisateur

Winmate

Winmate R15IT3S-SPC369 Manuel utilisateur

Winmate

Winmate W10IB3S-EHH2 Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Winmate

Winmate 7'' S-Series Manuel utilisateur

Winmate

Winmate R10IB3S-SPT269 Manuel utilisateur

Winmate

Winmate W04FA3S-EHT1 Manuel utilisateur

Winmate

Winmate M185D Manuel utilisateur

Winmate

Winmate Military Series Manuel utilisateur

Winmate

Winmate R15IH3S-SPC3 Manuel utilisateur

Winmate

Winmate R15IV3S-MR series Manuel utilisateur

Winmate

Winmate W15IB3S-PTA3 Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur