WiDrive DX-325 Manuel utilisateur
WiDRIVE DX-325 User’s Guide
Copyright © 2012 EDSLAB Tech. Inc.
User’s Manual
Wireless 802.11n Multi-functional Storage Router
DX-325
Version 4.0
WiDRIVE DX-325 User’s Guide
Copyright © 2012 EDSLAB Tech. Inc.
ii
Table of Contents
iii
iv
1Understand Your WiDRIVE 1
Overview of Your WiDRIVE DX-325 1
Package Content 2
The LED Status Indicators 2
Understand the LED indicators 3
Power on Your WiDRIVE 3
Shutdown Your WiDRIVE 3
Reset 3
2Setup Your WiDRIVE 5
5
AP Mode Setup 6
Client Scan Mode Setup 7
USB Mode Setup
8
3 WiDRIVE y 12
13
13
4 WiDRIVE Web Control 14
Login 14
Overview of WiDRIVE Web Control 14
Web Folder 15
BitTorrent 19
iTunes Server 21
22
5 WiDRIVE Applica ons 31
31
6 Specifica n 33
7Regulatory Informa n34
FCC Compliance
34
Your WiDRIVE
Cloud Setup
9
4
34
35
36
37
WiDRIVE DX-325 User’s Guide
Copyright © 2012 EDSLAB Tech. Inc.
iii
Declarations, disclaimers, instructions of guidings
Note, Noce, Cauon symbols among the user manual
NOTE!
Provides extra informaon for beer use of the products.
Noce!
Indicates behaviours that might cause a potenal data loss on WiDRIVE or on the device that
connects to it.
Cauon!
Indicates behaviours that might cause damage on product, human injury, or death.
Declaraon
Informaon in this document is subject to change without noce or obligaon.
Copyright © 2012 EDSLAB Technologies Inc. All rights reserved.
Disclaimer
Any loss, corrupon or destrucon of data while using a WiDRIVE is the sole responsibility of the
user, and under no circumstances will EDSLAB be held liable for the recovery or restoraon of this
data. To help prevent the loss of your data, EDSLAB highly recommends that you at least keep one
copy of your data. For example, you can save the copy either on your internal hard disk or portable
storage media.
WiDRIVE DX-325 User’s Guide
Copyright © 2012 EDSLAB Tech. Inc.
iv
Safety and care instructions
Please read the following safety informaon prior to using WiDRIVE.
• Only qualied personnel should service WiDRIVE. Faulty installaon or service may be dangerous
and may invalidate any warranty applicable to WiDRIVE.
• WiDRIVE can cause interference to pacemakers, hearing aids, and medical equipment. Keep safe
distances from medical devices when operang in such environments.
• Do not store or carry ammable liquids, gases, or explosive materials in the same compartment as
WiDRIVE.
• Switch your WiDRIVE o when in any area with a potenally explosive atmosphere, and obey
all signs and instrucons. Sparks can cause an explosion or re resulng in bodily injury or even
death.
• Do not drop or knock WiDRIVE. Rough handling can damage the electronics board and hard drive
in WiDRIVE.
• Do not expose WiDRIVE to extreme temperature. Do not put WiDRIVE on heang devices such as
microwave oven, stove, or radiator. The device may explode when overheated.
• Clean WiDRIVE surface with so damp cloth. Do not use any cleaning agent.
• Keep WiDRIVE dry. Any precipitaon, humidity, and liquids can corrode electronic circuits in
WiDRIVE.
WiDRIVE DX-325 User’s Guide
Copyright © 2012 EDSLAB Tech. Inc.
1
1 Understand Your WiDRIVE
Overview of Your WiDRIVE DX-325
• LED status indicators
• Antenna
• Power buon
• WAN port
• DC power input
• Mini USB port
• AP /Client Scan mode switch
• Reset
WiDRIVE DX-325 User’s Guide
Copyright © 2012 EDSLAB Tech. Inc.
2
Package Content
Your WiDRIVE DX325 has shipped along with the following content. Ensure you have all the
following items.
WiDRIVE DX-325 Quick Start Guide Ulity CD with Manual
5V 2A power adapter Ethernet cable (40cm) Mini USB to USB cable (40cm)
The LED Status Indicators
• System indicator
• LAN indicator
• WiFi indicator
• HDD indicator
G
G
B
WiDRIVE DX-325 User’s Guide
Copyright © 2012 EDSLAB Tech. Inc.
3
Understand the LED indicators
Indicator Status
Power on Green
Flashing between orange and green
System ready Green
Flashing between orange and green
Not ready Flashing between orange and green
WiFi ready Green
WiFi on work Flashing green
LAN port plugged in Green
Data transferring Flashing green
Data transferring Flashing between orange and green
Power on Your WiDRIVE
to power on your WiDRIVE.
Shutdown Your WiDRIVE
Normal shutdown
You can click Shutdown Maintenance page in web control or shortly press the Power
to normal shutdown your WiDRIVE.
Force shutdown
to force shutdown your WiDRIVE.
Reset Your WiDRIVE
Reset from device
You can to normal
reset your WiDRIVE.
Press to
reset
WiDRIVE DX-325 User’s Guide
Copyright © 2012 EDSLAB Tech. Inc.
4
Mode Selecon
You can connect your device with WiDRIVE in three ways: Access Point (AP) mode, Client Scan mode,
and USB mode.
Access Point (AP) Mode
Your WiDRIVE performs as a wireless storage router in AP mode.
Slide the mode switch down and power on your WiDRIVE.
Connect WiDRIVE and router/modem with an ethernet cable, and then wirelessly connect your PC to
WiDRIVE (See “AP Mode Setup” on page 6 to setup AP mode).
Client Scan Mode
Your WiDRIVE performs as a driverless 802.11N wireless adapter in Client Scan mode.
Slide the mode switch up and power on your WiDRIVE. Connect your computer with WiDRIVE by an
ethernet cable, and then wirelessly connect your WiDRIVE to a router (See “Client Scan Mode Setup”
on page 7 to setup Client Scan mode).
USB Mode
Connect WiDRIVE and your computer with an USB cable, your
WiDRIVE is behaved as an external storage device in USB mode.
WiDRIVE DX-325 User’s Guide
Copyright © 2012 EDSLAB Tech. Inc.
5
2 Setup Your WiDRIVE
HDD Installation
Please follow these 3 steps to install a HDD.
1. Dissemble the HDD side cover.
i. Press the back of the middle frame to loosen the hook.
ii. Take apart the HDD side cover.
2. Slide HDD into SATA connector (ensure HDD is fully inserted into connector).
3. Hook on and then push the side cover toward the middle frame unl you hear a click.
WiDRIVE DX-325 User’s Guide
Copyright © 2012 EDSLAB Tech. Inc.
6
AP Mode Setup
In AP mode, your WiDRIVE connects to and shares the internet. Your devices connects to
WiDRIVE wirelessly:
1. Slide the mode switch to AP mode.
2. Connect your WiDRIVE with internet/DSL/modem with an ethernet cable.
3. Connect the power cable to your WiDRIVE and power on your WiDRIVE.
4. Now your WiDRIVE behaves like an wireless router. Connect your WiDRIVE by Windows XP.
i. Open Windows Start Menu, select “Connect To”, le-click “Wireless Nerwork
Connecon”.
3
1
2
4
CLIENT SCAN
AP
Internet/modem/DSL
Autres manuels pour DX-325
1
Table des matières
Autres manuels WiDrive Routeur sans fil
