Whirlpool ED20GK Manuel utilisateur

T&If1 ol@

Home Appliances

Use&CareGuide

Freezer

Light

I Model and

serial number

(glass - EDPOGK,

wire - EDZOHK)

freezer shelves

Freezer

Base grille

NO-FROST

REFRIGERATOR-FREEZERS

ED20HK ED20GK

Contents

Important Safety Instructions. ........

Before Using Your Refrigerator .......

Using Your Refrigerator. ..............

Setting the controls ...................

Changing the control settings ..........

Exterior moisture control ..............

Adjusting the refrigerator shelves .......

Removing and adjusting the freezer

shelves ...........................

Removing the crisper, meat drawer

andcover .........................

Adjusting the meat drawer temperature .

Removing the freezer bin ..............

Changing the light bulbs ...............

Removing the base grille ..............

Ice cube trays. .......................

Automatic ice maker ..................

Sounds you may hear .................

Energy saving tips ....................

Cleaning Your Refrigerator ...........

Food Storage Guide ..................

Storing fresh food ....................

Storing frozen food ...................

Caring For Your Refrigerator. .........

Vacation and moving care .............

Power interruptions ...................

If You Need Service Or Assistance ....

Whirlpool Refrigerator Warranty. .....

01991 Whirlpool Corporation

-3

Remove the Consumer Buy Guide Label, tape

and any inside labels before using the refrigerator.

To remove any remaining glue:

Rub briskly with thumb to make a ball, then

remove.

Soak area with liquid hand dishwashing

detergent before removing glue as described

above. Do not use sharp instruments, rubbing

alcohol, flammable fluids or abrasive cleaners.

These can damage the material. See “Important

Safety Instructions” on page 3.

NOTE: Do not remove any permanent instruction

labels inside your refrigerator. Do not remove the

Tech Sheet fastened under the refrigerator at

the front.

Thank you for buying a Whirlpool appliance.

Please complete and mail the Owner Regis-

tration Card provided with this product.

Then complete the form below. Have this informa-

tion ready if you need service or call with a

question.

Copy model and serial numbers from plate

(see diagram on front cover) and purchase date

from sales slip.

Keep this book and sales slip together in a

handy place.

Model Number

Serial Number

Purchase Date

Service Company Phone Number

ImportantSafetyInstructions

To reduce the risk of fire, electrical shock, or injury when using your

refrigerator, follow basic precautions including the following:

Read all instructions before using the

refrigerator.

Child entrapment and suffocation

are not problems of the past. Junked

or abandoned refrigerators are still

dangerous...even if they will “just sit

in the garage a few days!’

If you are getting rid of your old

refrigerator, do it safely. Please read

the enclosed safety booklet from

the Association of Home Appliance

Manufacturers. Help prevent accidents.

Never allow children to operate, play

with, or crawl inside the refrigerator.

Never clean refrigerator parts with

flammable fluids. The fumes can create

a fire hazard or explosion.

. FOR YOUR SAFETY.

DO NOT STORE OR USE GASOLINE OR

OTHER FLAMMABLE VAPORS AND LIQ-

UIDS IN THE VICINITY OF THIS OR ANY

OTHER APPLIANCE. THE FUMES CAN

CREATE A FIRE HAZARD OR EXPLOSION.

It is your responsibility to be sure your

refrigerator:

is installed and leveled on a floor that will hold

the weight, and in an area suitable for its size

and use.

is connected only to the proper kind of outlet,

with the correct electrical supply and ground-

ing. (Refer to the Electrical Requirements and

Grounding Instructions Sheet.)

is used only to do what home refrigerators are

designed to do.

is not near an oven, radiator or other heat

source.

is properly maintained.

is out of the weather.

is used in an area where the room tempera-

ture will not fall below 55°F (13°C).

is not used by anyone unable to operate

it properly.

is not loaded with food before it has time to

get properly cold.

- SAVE THESE INSTRUCTIONS -

BeforeUsingYourRefrigerator

Sprang grounding

type wall receptacle

a-prong

grounding plug

Refrigerator

power cord

Clean it

Clean your refrigerator before using it.

See cleaning instructions on page 11.

Plug it in

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused

and properly grounded electrical supply is

required. It is recommended that a separate circuit

serving only this appliance be provided. Use a re-

ceptacle which cannot be turned off with a switch

or pull chain. Do not use an extension cord.

See Electrical Requirements and Grounding

Instructions Sheet in your Literature Package.

Install properly

Allow Y2inch (1.25 cm) space on each side

and at the top of the refrigerator for ease of

installation.

2. If the refrigerator is to be against a wall, you

might want to leave extra space on the hinge

side so the door can be opened wider.

3. The refrigerator back can be flush against

the wall.

4. If your refrigerator has an ice maker, make sure

ice maker water supply has been connected.

Refer to Installation Instructions.

Right to raise;Right to raise;

Left to lowerLeft to lower

Use screwdriverUse screwdriver

Level refrigerator-freezer

1. Remove the base grille. (See page 6.)

2. To raise front, turn screw in direction shown.

3. To lower front, turn screw in direction shown.

4. Check with level.

5. Replace base grille. (See page 8.)

Lower

UsingYourRefrigerator

Setting the controls

Controls for the refrigerator and freezer are in the

refrigerator. When the refrigerator is plugged in for

the first time:

1. Set the Refrigerator Control to 3.

2. Set the Freezer Control to B.

Give the refrigerator time to cool down completely

before adding food. (This may take several hours.)

These settings should be about right for normal

household refrigerator usage.

The controls will be set about right when milk

or juice is as cold as you like and when ice cream

is firm.

Refrigerator Control adjustments range from

1 to 5. Freezer Control adjustments range from

AtoC.

Changing the control settings

If you need to adjust temperatures in refrigerator or

freezer, use the settings listed in the chart below. If

you have questions, call your COOL-LINE@ serv-

ice assistance telephone number. (See page 14.)

Adjust the Refrigerator Control first.

Wait at least 24 hours between adjustments.

Then adjust the Freezer Control if needed.

CONDITION:

If Refrigerator

Section is

TOO WARM

If Freezer

Section is

TOO WARM

If Refrigerator

Section is

TOO COLD

REASON:

Door opened often

Large amount of food added

Room temperature too warm

Door opened often

Large amount of food added

Very cold room temperature

(can’t cycle often enough)

Controls not set correctly

for your conditions

CONTROL SETTINGS:

Refrigerator 4

Freezer A

Refrigerator 3

Freezer C

Refrigerator 2

Freezer B

If ICE isn’t

MADE FAST ENOUGH

If BOTH SECTIONS

are TOO WARM

Heavy ice usage

Very cold room temperature

(can’t cycle often enough)

Door opened often

Large amount of food added

Very warm or very cold room

temperatures

Refrigerator 3

Freezer C

Refrigerator 4

Freezer B

Using Your Refrigerator

Continued

Exterior moisture control

The Exterior Moisture Control on the Control

Console operates electric heaters around the door

openings. These heaters help keep moisture from

forming on the outside of the refrigerator.

Use the OFF setting when humidity is low.

2. Use the ON setting if moisture forms on the

outside of the refrigerator.

Adjusting the refrigerator shelves

Shelves can be adjusted to match the way you use

your refrigerator. Glass shelves are strong enough

to hold bottles, milk and other heavy food items.

To remove glass or wire shelves:

1. Remove items from shelf.

2. Tilt up at front.

3. Lift up at back.

4. Pull shelf straight out.

To replace glass or wire shelves:

1. Guide the rear hooks into the slots in the

shelf supports.

2. Tilt up front of shelf until hooks drop into slot.

Lower front of shelf to level position.

Model EDSOGK:

Glass shelves are

heavy. Be careful.

Removing and adjusting the freezer

shelves

To remove the shelves:

Lift right side of shelf off supports.

2. Slide shelf out of shelf support holes.

3. Replace in reverse order.

To adjust the shelves:

1. Remove shelf as above.

2. Remove supports by sliding upward.

3. Replace supports on desired level.

4. Replace shelf.

NOTE: The cup shaped supports go in the back of

the freezer.

Pull out to the stop, lift the front

i I iI/l &dpullagain.

Remove the

Use control to

adjust

meat drawer

temperature. I

Removing the freezer bin

For proper air movement, keep the freezer bin in

place when the refrigerator is operating.

To remove the bin:

1. Slide bin out to the stop.

2. Lift the front to clear the stop.

3. Slide out the rest of the way.

To replace the bin:

1. Place bin on the slides.

2. Make sure the stops clear the front of the slides.

3. Slide bin in.

Removing the crisper, meat drawer

and cover

To remove the crisper and meat drawer:

1. Slide crisper and meat drawer straight out to

the stop, lift drawer, then slide out the rest of

the way.

2. Replace in reverse order.

To remove crisper cover:

1. Push up crisper cover glass insert from bottom,

then slide out with both hands.

2. Lift front of cover frame.

3. Lift out cover frame by pulling up and out.

4. Remove metal cover support.

To replace crisper cover:

1. Replace metal cover support on wall supports

in front section of cabinet.

2. Fit back corners into notch supports on walls of

refrigerator, then lower into place.

3. Slide back of glass insert into place, then lower

front.

Adjusting the meat drawer temperature

Cold air flows against the meat drawer through an

opening between the freezer and the refrigerator.

This helps keep the meat drawer colder than the

rest of the refrigerator.

Slide the control to let more or less cold

air through.

Using Your Refrigerator

Continued

Changing the light bulbs

Electrical Shock Hazard

Before removing a light bulb, either unplug

the refrigerator or disconnect the electricity

leading to the refrigerator at the main power

supply. Failure to do so could result in

electrical shock or personal injury.

To change refrigerator light:

1. Disconnect refrigerator from power supply.

2. Reach behind the Control Console to find bulb.

3. Remove bulb.

4. Replace with a 40-watt tubular appliance bulb.

5. Reconnect to power supply.

To change freezer light:

1. Disconnect refrigerator from power supply.

2. Grasp the top and bottom of the light shield.

3. Squeeze and pull light shield out.

4. Replace bulb with a 40-watt appliance bulb.

5. Replace the light shield.

6. Reconnect power supply.

NOTE: Not all commercial appliance bulbs will fit

your refrigerator. Be sure to replace bulb with one

of the same size and shape.

Removing the base grille

To remove the grille:

1. Open the door.

2. Pull grille out as shown.

3. Do not remove Tech Sheet fastened

behind grille.

To replace the grille:

1. Line up grille support tabs with metal clips.

2. Push firmly to snap into place.

3. Close the door.

See cleaning instructions for defrost pan and

condenser coils on page 11.

defrost pan

Ice cube trays

If cubes are not used, they may shrink. The

moving cold air starts a slow evaporation. The

longer cubes are stored, the smaller they get.

To remove ice:

1. Hold tray at both ends.

2. Twist slightly.

Raise

signal

arm to

stop ice

Lower

signal

arm to

start it

Automatic ice maker

If you have the automatic ice maker accessory, or

if you plan to add one later (Part No. ECKMF-90),

there are a few things you will want to know:

The ON/OFF lever is a wire signal arm.

Down.. .for making ice automatically.

Up.. .to shut off the ice maker.

NOTE: Do not turn ice maker on until it is con-

nected to the water supply. Instructions for

ice maker water supply hook-up are

attached to the back of the refrigerator

cabinet. _.

. The dial or lever on the side of the ice maker

changes the size of the cubes.

Shake the bin occasionally to keep cubes sepa-

rated, and to obtain increased storage capacity.

It is normal for ice crescents to be attached by a

corner. They will break apart easily.

You will hear water running when ice maker is

working. You’ll hear ice fall into the bin. Don’t let

these sounds bother you.

The ice maker will not operate until the freezer

is cold enough to make ice. This can take

overnight.

Because of new plumbing connections, the first

ice may be discolored or off-flavored. Discard the

first few batches of ice.

If ice is not being made fast enough and more ice

is needed, turn the Refrigerator Control toward a

higher number. Wait a day and, if necessary, turn

the Freezer Control toward C.

If you remove the ice bin, raise the signal arm to

shut off the ice maker. When you return the bin,

push it all the way in and lower the arm to the ON

position.

If cubes are stored too long, they may develop an

off-flavor.. like stale water. Throw them away. Ice

maker will make new ice. Cubes in the ice bin

can also become smaller by evaporation.

Good water quality is important for good ice

quality. It is not recommended that the ice maker

be connected to a softened water supply. Water

softener chemicals such as salt from a malfunc-

tioning softener can damage the ice maker mold

and lead to poor quality ice. If a softened water

supply cannot be avoided, then it is important

that the water softener be well maintained and

operating properly. 9

Using Your Refrigerator

Continued

Sounds you may hear

Your new refrigerator may make sounds that your

old one didn’t. Because the sounds are new to

you, you might be concerned about them. Don’t

be. Most of the new sounds are normal. Hard

surfaces like the floor, walls and cabinets can

make the sounds seem louder.

The following describes the kinds of sounds

that might be new to you, and what may be

making them.

Slight hum, soft hiss:

You may hear the refrigerator’s fan motor and

moving air.

Clicking or snapping sounds:

The thermostat makes a definite click when the

refrigerator stops running. It also makes a sound

when the refrigerator starts. The defrost timer

will click when the defrost cycle starts.

Water sounds:

When the refrigerator stops running, you may hear

gurgling in the tubing for a few minutes after it

stops. You may also hear defrost water running

into the defrost water pan.

Ice maker sounds:

trickling water

thud (clatter of ice)

If your refrigerator has an ice maker, you may hear

buzzing (from the water valve), trickling water and

the clatter of ice dumped into the bin.

Running sounds:

Your refrigerator has a high-efficiency compressor

and motor. It will run longer than older designs. It

may even seem to run most of the time.

Energy saving tips

You can help your refrigerator use less electricity.

Check door gaskets for a tight seal. Level the

cabinet to be sure of a good seal.

Clean the condenser coils regularly.

Open the door as few times as possible. Think

about what you need before you open the door.

Get everything out at one time. Keep food orga-

nized so you won’t have to search for what you

want. Close door as soon as food is removed.

Go ahead and fill up the refrigerator, but don’t

overcrowd it so air movement is blocked.

It is a waste of electricity to set the refrigerator

and freezer to temperatures colder than they

need to be. If ice cream is firm in the freezer and

drinks are as cold as your family likes them,

that’s cold enough.

Keep the Exterior Moisture Control on the OFF

setting unless moisture forms on refrigerator

exterior.

Make sure your refrigerator is not next to a heat

source such as a range, water heater, furnace,

radiator or in direct sunlight.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Whirlpool Réfrigérateur

Whirlpool

Whirlpool W8TXEWFY Manuel de la liste des pièces

Whirlpool

Whirlpool CT14NKXJN00 Manuel utilisateur

Whirlpool

Whirlpool ED20PK ED22PK Manuel utilisateur

Whirlpool

Whirlpool ET8WTKXVB00 Manuel utilisateur

Whirlpool

Whirlpool GSS30C6EYB Instructions de montage

Whirlpool

Whirlpool GARF19XXPK00 Manuel utilisateur

Whirlpool

Whirlpool NO-FROST TOP FREEZER REFRIGERATOR Manuel utilisateur

Whirlpool

Whirlpool GS6NVEXV Manuel utilisateur

Whirlpool

Whirlpool ET8CHMXKQ04 Manuel utilisateur

Whirlpool

Whirlpool ARC 1872 IX Manuel utilisateur

Whirlpool

Whirlpool ARG 733/A+ Caractéristiques techniques

Whirlpool

Whirlpool ET18AK Manuel utilisateur

Whirlpool

Whirlpool GI0FSAXVQ00 Manuel utilisateur

Whirlpool

Whirlpool WRS342FIAM Manuel utilisateur

Whirlpool

Whirlpool BSNF 8999 PB Manuel d'installation et d'exploitation

Whirlpool

Whirlpool WRT18YAWD Manuel utilisateur

Whirlpool

Whirlpool WRS975SIDM Guide de démarrage rapide

Whirlpool

Whirlpool GB9SHKXMQ02 Manuel utilisateur

Whirlpool

Whirlpool ET8WTKXKB - 18 cu. Ft. Refrigerator Instructions de montage

Whirlpool

Whirlpool ED20PK ED22PK Manuel utilisateur

Whirlpool

Whirlpool GI5FSAXV Manuel de la liste des pièces

Whirlpool

Whirlpool ARC 6415/IX Manuel utilisateur

Whirlpool

Whirlpool AT18DK Manuel utilisateur

Whirlpool

Whirlpool ER8MHKXRB00 Manuel utilisateur

Manuels Réfrigérateur populaires d'autres marques

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Manuel utilisateur

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Manuel utilisateur

Sharp

Sharp SJ-BA31IEXW2-EU Manuel utilisateur

CORBERO

CORBERO CC2300MCW Manuel utilisateur

KitchenAid

KitchenAid 2205264 Manuel utilisateur

Stengel

Stengel KU 1101 A++ Manuel utilisateur

NEFF

NEFF KI181 Series Manuel utilisateur

Hoshizaki

Hoshizaki Reach-In Manuel utilisateur

Amana

Amana ASD2524VES00 Manuel utilisateur

BOMANN

BOMANN KGC 213 Manuel utilisateur

Danby

Danby DAR044A1SLDD Instructions de montage

Samsung

Samsung RF323TE Manuel utilisateur

Beko

Beko CSA31022 Manuel utilisateur

IKEA

IKEA FROSTIG C 185 E Manuel utilisateur

Electrolux

Electrolux ER 6821 D Manuel utilisateur

True

True TS-28 Manuel utilisateur

Frigidaire

Frigidaire FSC23R5DW9 Manuel utilisateur

Beko

Beko LSP4579W Manuel utilisateur