Wetelecom WMR-100 Manuel utilisateur
WeTelecomWMR-100MiniHotspot
Quick Set Up Guide
1
TABLE OF CONTENTS
Getting Started ……………………………………………………………………….…….3
1. Minimum Requirement ………………………………………………….………..3
2. About WMR-100 Mini Hotspot …………………………....…………….………..3
3. LED State ……………………………………………………………….…...……..4
4. Insert RUIM card and Battery, and charge the battery ...………….…………..5
5. Wi-Fi Mode Connection …………………………………………….…………….6
6. USB Modem Mode Connection…………………………………….……………9
Important Notice …………………………………………………………………………..10
Battery Use and Removal ………………………………………………………………..11
Safety Hazards ……………………………………………………………………………11
Product Specification …………………………………………………………………….12
2
Copyright © 2011 WeTelecom Co., Ltd.
1. Trademarks
and WeTelecom are trademarks of WeTelecom Co., Ltd. All other
trademarks mentioned in this manual are the property of their respective holders.
2. All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any
means without prior written consent of WeTelecom Co., Ltd.
3. Notice
The information in this manual is subject to change without notice. Every effort has
been made in the preparation of this manual to ensure accuracy of the contents, but
all statements, information, and recommendations in this manual do not constitute
the warranty of any kind, expressed or implied.
4.Manufacturer
WeTelecom Co., Ltd.
The’O Plus #1604
Sanbon-dong, Gunpo City, Kyunggi-do, KOREA
Phone : +82-70-8699-3873
5. The WMR-100 Package
WMR-100 Mini Hotspot
Lithium Ion Battery
AC Travel Adaptor
MicroUSB Data Cable
User Manual CD
Quick Start Guide
Warranty Card
3
Getting Started
1. Minimum Requirement
1.1. Hardware
PC/Notebook at speed of 300 MHz or higher.
Wireless LAN essential Required, 802.11 b/g/n 2.4GHz.
Recommend to use 128MB RAM or higher
At least 100 MB of free hard disk space is required.
Motherboard or PCI card that supports USB.
1.2. Operating System
Windows® XP Home/Professional with Service Pack 2
Windows® 2000 with Service Pack 4
Windows® Vista / 7 32bits/64bits
Mac OS 10.4 or higher
2. About WMR-100 Mini Hotspot
①Power Button and Status Indicators
Turn the device power on and off
Indicate power , battery and CDMA communication activities.(See page 9 for
Power Button LED description)
②Wi-Fi Router Status Indicator
Indicates Wi-Fi Router status.
2
4
3
1
4
③External Antenna Connector
Enables you use external antenna for better antenna performance.
④MicroUSB Connector
Connects with MicroUSB data cable, AC Travel Adaptor.
⑤Factory Reset button
Resets device to replace factory setting
⑥RUIM Card Slot
RUIM card is inserted here
⑦Battery Compartment
Battery is inserted here.
3. LED State
3.1. Wi-Fi Router Status LED
LED Status Status information
LED not lit No Power (Wi-Fi mode off)
LED Green Solid Wi-Fi Powered
LED Green Blink Wi-Fi transmitting and receiving data;
Blinking rate proportional to data speed
6
7 5
5
3.2. Power Button LED
LED Status Status information
LED not lit No Power
LED RED Solid Power ON
LED RED Blink Low Battery warning
LED Green Solid Service Available
LED Green Blink Service Not Available
LED Blue Solid Connected to EVDO
LED Blue Blink Connected to 1x
LED Orange Solid Charging
LED Orange Blink Fully Charged
4. Insert RUIM card and Battery, and charge the battery
Before powering your WMR-100 Mini Hotspot on for the first time, you must insert
the RUIM card supplied by service provider, insert the battery and charge the battery.
1. Slide to open the battery cover at the bottom of the device as shown.
2. Insert the RUIM card into the RUIM card slot as shown.
6
3. Insert the battery by lining up battery contact point with the gold contact points.
4. Once the battery is securely settled, put the battery cover back into the device
until it locks firmly.
5. Plug the AC travel adaptor into the proper electrical outlet and connect MicroUSB
port of the AC travel adaptor to the MicroUSB port of the device. Charge the
battery for at least three hours.
(The Power LED will flash solid orange while the device charging and flash blink
orange once charging is complete.)
5. Wi-Fi Mode Connection
You can connect the WMR-100 Mini Hotspot to your computer in two modes.
- Wi-Fi Mode
- USB Modem Mode
How to Connect WMR-100 via Wi-Fi
1. Insert RUIM Card and Battery with AC Travel Adaptor
2. Press Power button to connect to Wi-Fi mode .
3. Use your default Wi-Fi manager to locate the WMR-100 wireless network.
7
Tip
The Steps of connecting to a Wi-Fi network vary depending on your
operating system whether you use the native application or third-party
software.
Generally you click an icon (often in the Windows notification area or
System Preferences>Network on a Mac) where you can select “View
Available Wireless Networks.” If you are unfamiliar with wireless networking
on your computer, consult the computer help system.
4. If multiple wireless networks are found, highlight the one that indicated as “WMR-
100AP_XXXXXX” in its name.
5. Click Connect.
6. If this is your first time connecting to the WMR-100, continue with these steps.
7. At computer’s Web browser, type http://192.168.0.254 into the address window
and press Enter or Return key.
8. Enter ID & password as “admin”, “admin” when requested.
9. A Setup wizard will launch and guide you through setting up security sequences
for your device.
Important Be sure to write down both the administrative password and the network
key which you created from the initial Setup wizard.
If you cancel the wizard, your network will be left unsecure (open).
10.Follow the instructions on the screen as shown:
- Choose one from 3 different connection mode, “Auto”, “Manual” and “On Demand”.
- Click “Next” button.
8
- Choose “Authentication” and “Preferred Mode”.
- Press “Next” button.
Important To secure your personal information/files and virus attack, it is a must to
set “Security Mode” with password.
- Change “Network Name(SSID)” as you desire.
- It is strongly recommended to check “Enable” box and to write “Pass Phrase”.
“Pass Phrase” is your password.
11.After you click “Done”, your device will reboot.
12.At computer’s default wireless network connection manager, double-click the
network name (SSID) as you desire and type password in network key.
9
6. USB Modem Mode Connection
USB Modem mode allows WMR-100 to use as USB Modem with Wi-Fi mode
disabled. First you must install MTS CONNECT program and drivers to use in this
mode.
How to connect WMR-100 via USB port with USB Cable
1. Press the Power button on WMR-100. The Power button LED and Wi-Fi LED will
flash.
2. Insert USB data cable into WMR-100 and USB port on your computer. The
Power button LED illuminates and The Wi-Fi status LED does not illuminate.
3. Launch MTS CONNECT software and driver as next steps.
MTS CONNECT Installation for Windows® OS
1. If USB DRIVER is not present, Modem package Installer will run automatically.
Tip If Modem package Installer doesn’t work automatically, Execute
RunPack.exe manually.
2. Select the desire language and press “OK”. Welcoming message for using MTS
CONNECT window will be shown.
3. Press “Install” button. The program starts automatically.
4. Press “Finish” button once it is done with program installation.
5. It will now start to install the USB driver. Please check whether the driver has
been installed properly by checking <Device Manager>.
MTS CONNECT Installation for MAC® OS
1. Plug the WMR-100 in USB port of MAC PC.
2. Open MTS CONNECT CD, start mintechUSBCDC and install MAC Drivers.
Restart MAC PC.
Table des matières
