Westcott 8001 Manuel
Accessories
Page 1 of 1
Setup Instructions
Universal Clamp
Style Series: 8001
Description
A quick solution when an umbrella receptacle is not available.
Product Contains
[1] Hose Clamp
[1] Black Block with thumb screw
INSTRUCTIONS
NOTE: When attaching to a portable Strobe,
follow the above instructions for assembly and
choose the required Hose Clamp size for your
Strobe.
1. The hose clamp is to slide completely
around the front section of the lighting unit.
2. When in place, insert the Bracket under the
Hose Clamp (In the Harness Position)
3. Use a screwdriver to then tighten. Finally,
insert umbrella shaft through mount until
desired position is established, then tighten
Set Screw Knob.
NOTE: The Bracket Hose Clamp comes in a
variety of sizes up to 8” which is adaptable to
most shapes and can be purchased at your local
automotive supply or hardware stores. (Ideal
or Dixon clamps work best)
Table des matières
Autres manuels Westcott Accessoires pour appareils photo
Westcott
Westcott 1411 Manuel
Westcott
Westcott FJ-X2m Manuel utilisateur
Westcott
Westcott 1861 Manuel
Westcott
Westcott Halo & Apollo 1050 Manuel
Westcott
Westcott PokerLite 7054 Manuel
Westcott
Westcott 1815 Manuel
Westcott
Westcott Strobelite 241 Manuel
Westcott
Westcott 1875 Manuel
Westcott
Westcott Apollo 1070 Manuel
Westcott
Westcott 1879 Manuel
Westcott
Westcott SkyLux Manuel utilisateur
Westcott
Westcott 1869 Manuel
Westcott
Westcott Apollo GRID Manuel utilisateur
Westcott
Westcott 1858 Manuel
Westcott
Westcott 1878 Manuel
Westcott
Westcott 1090 Manuel
Westcott
Westcott FJ-X2m Manuel utilisateur
Westcott
Westcott 4805 Manuel
Westcott
Westcott 1867 Manuel
Westcott
Westcott 1874 Manuel
