WEIGL ProI/O Series Manuel utilisateur
Weigl-EM
+43 (0) 650 84 333 48
www.Weigl-EM.at
Office@Weigl-EM.at
Weigl-EM is the hardware manufacturer and European
distributor
Weigl Works, LLC
440-941-5849
www.WeiglWorks.com
Info@WeiglWorks.com
Weigl Works, LLC is the exclusive North American distributor of
Weigl-EM products
© 2011 – 2013 - Weigl – Elektronik & Mediaprojekte
Contents
1 Important Information and Safety Tips................................. 5
1.1 FCC and CE Compliance.......................................................6
1.2 FCC Instruction to User........................................................7
1.3 FCC DECLARATION OF CONFORMITY ..................................9
1.4 CE DECLARATION OF CONFORMITY ..................................10
2 Warranty............................................................................11
3 FRONT................................................................................13
3.1 Daisy chain connection......................................................13
3.2 WEMC-Dio32 .....................................................................14
3.3 Network.............................................................................15
4 BACK..................................................................................17
4.1 ProI/O Analog 8 .................................................................17
4.2 ProI/O Digital 32 ................................................................17
4.3 ProI/O DMX 512 ................................................................18
4.4 ProI/O Relay 8....................................................................18
4.5 Pro I/O Open-Collector......................................................19
4.6 Pro I/O Remote..................................................................19
4.7 Pro I/O Servo .....................................................................20
5 USB-Update and driver installation .....................................21
5.1 Driver installation ..............................................................21
5.2 USB-Update .......................................................................23
Important Information and Safety Tips
5
1 Important Information and Safety Tips
The Weigl ProI/O is an electronic device that can fail, in part
or in full despite careful testing. Therefore, it must not be used in
applications where personal safety could be at risk due to the
malfunction of the device.
Weigl equipment is generally not designed, intended,
authorized or warranted to be suitable in life support
applications, devices, systems, or other critical applications.
Inclusion of Weigl equipment in such applications is understood
to be the full risk of the customer.
Weigl assumes no liability for applications assistance,
customer produced design, software performance or
infringements of pa-tents or copyrights.
Weigl does not warrant or represent that any license, either
expressed or implied, is granted under any patent right,
copyright, mask work right, or other intellectual property right of
Weigl covering or relating to any combination, machine or
process in which Weigl products or services might be or are
used. The ProI/O must not be directly connected to voltages
greater than 24V.
It is important to read this manual and familiarize yourself
with the function of the ProI/O before working with the device.
Failure to do so may cause damage to the ProI/O or connected
components.
Important Information and Safety Tips
6
Only experienced personnel should connect the ProI/O to
other systems that comply with required safety regulations.
External power sources connected to the ProI/O must not
exceed the maximum allowable voltage (24V) and must be
protected accordingly. In addition, correct polarity must be
utilized to avoid damage to the ProI/O. Failure to do so will void
the warranty and Weigl Works, LLC or Weigl will not be liable for
any resulting damages.
When connecting solenoids, a freewheeling diode for each
solenoid is required. They should be mounted as close as
possible to the solenoid. Please refer to the wiring diagram in the
manual. If this is not observed, the output driver will be
destroyed and will void the warranty.
The ProI/O should not be exposed to extreme heat or
humidity before, during or after installation. If the device is used
for outdoor installations, it must be protected with proper
weather proofing enclosures. Direct sunlight may also lead to
overheating.
Damages caused by improper handling, improper wiring or
improper use will void warranty and Weigl Works, LLC or Weigl-
EM will not be held liable.
1.1 FCC and CE Compliance
Weigl ProI/O's which are hardware revision 1.10 or later have
been tested to comply with FCC and CE requirements.
Important Information and Safety Tips
7
The ProI/O is low voltage DC devices and therefore, neither
UL nor CE require safety testing. For fireproofing or additional
radio frequency interference shielding, the ProCommander can
be rack mounted in a 19" rack space with optional hardware.
1.2 FCC Instruction to User
This equipment has been tested and found to comply with
the limits for a class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio
frequency energy and if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and re-
connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
This equipment has been verified to comply with the limits
for a class B computing device, pursuant to FCC Rules. In order to
Important Information and Safety Tips
8
maintain compliance with FCC regulations, shielded cables must
be used with this equipment. Operation with nonapproved
equipment or unshielded cables is likely to result in interference
to radio and TV reception. The user is cautioned that changes
and modifications made to the equipment without the approval
of manufacturer could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference and (2) this device must accept
any interference received, including interference that may cause
undesired operation. This Class B digital apparatus meets all
requirements of the Canadian Interference-Causing Equipment
Regulations.
Important Information and Safety Tips
9
1.3 FCC DECLARATION OF CONFORMITY
This device complies with Part 15 of the FCC Rules Class B.
Application of Council
Directives:
EMC Directive, 89/336/EEC
Manufacturer’s Name:
Weigl – Elektronik &
Mediaprojekte
Manufacturer’s Address:
Limberg 3, 4201
Gramastetten, Austria
US Importer’s Name:
Weigl Works, LLC
Importer’s Address:
14837 Detroit Ave, Suite 177,
Lakewood OH, 44107
Type of Equipment:
Entertainment and Lighting
Control
Equipment Class:
Commercial and Light
Industrial
Model:
Weigl ProI/
Year of Manufacture:
2011
I the undersigned, hereby declare that the equipment
specified above conforms to the above directive(s) and
standard(s).
Place: Gramastetten, Date: December 13th, 2011
Full Name: Manfred Weigl
Important Information and Safety Tips
10
1.4 CE DECLARATION OF CONFORMITY
Weigl ProI/O which are hardware revision 1.10 or later have
been tested to comply with CE requirements.
Model: Weigl ProI/O
This product herewith confirmed to comply with the
requirements set out in the Council Directive on the
approximation of the laws of the Member States relating to
Electromagnetic Compatibility Directive 2004/108/EC. For the
evaluation regarding EMC, the following standards were applied:
EN 61000-6-2:2005 (Industrial Environment)
EN 61000-6-3:2007 (Industrial Environment)
EN 55022: 2006 Class B.
I the undersigned, hereby declare that the equipment
specified above conforms to the above directive(s) and
standard(s).
Place: Gramastetten, Date: December 13th, 2011
Full Name: Manfred Weigl
Ce manuel convient aux modèles suivants
7
Table des matières
Autres manuels WEIGL Matériel réseau
Manuels Matériel réseau populaires d'autres marques
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuel utilisateur
Yudor
Yudor YDS-16 Manuel utilisateur
D-Link
D-Link ShareCenter DNS-320L Manuel utilisateur
Samsung
Samsung ES1642dc Instructions d'utilisation
Honeywell Home
Honeywell Home LTEM-PV Instructions de montage
