Weber Igrill2 Manuel utilisateur

User Manual

Table of Contents

In the Box 3

Quick Start Instructions 3

Getting Started 4

Weber®iGrill®App 4

Battery Replacement 5

Powering On & Off 5

Connecting 6

Disconnecting 7

Mounting 7

Probe Use 8

Probe Wrap Use 9

Using the iGrill® 2 9

Display 9

Probe Toggle Buttons 10

Proximity Sensor 11

Custom & Preset Alarms 11

Setting Up A Cooking Alarm 12

Preset Alarms for Different Types of Meats 12

Creating a Custom Preset 12

Pre-Alarm Notication 13

Renaming Probes 14

Timer Tool 14

Globe Tool 14

Graph Tool 14

Problem Solving 15

Disclaimer 19

Regulations 19

In the Box

Inside your iGrill® 2 box, you will nd:

• 1 iGrill® 2

• 2 AA Batteries

• 2 Pro Meat Probes

• 2 Probe Wraps

• 2 Coloured Probe Indicators (Yellow and Red)

• 1 Optional Magnetic Disc

• Quick Start Guide

Quick Start Instructions

1. Download the Weber®iGrill®App from the App Store®or Google

PlayTM Store on one of the following compatible devices:

• iPhone®(4S and later)

• iPad®(3rd generation and later)

• iPad mini™ (all generations)

• iPod touch®(5th generation and later)

• Many Android™ devices equipped with Bluetooth®4.0 and

running Android™ software version 4.3 or later

2. Enable Bluetooth®on your smart device under ‘Settings.’

3. Separate the iGrill® 2 from its base by rmly holding the base with

one hand and gently pulling the iGrill® 2top upwards with the other

hand.

4. On the underside of the iGrill® 2, press down and remove the battery

door. The two AA batteries that are supplied with your iGrill® 2

should be inserted with their negative terminals compressing the

springs. Replace the battery door.

5. Clip the iGrill® 2top back onto its base.

6. Plug one or more probes into the probe ports of the iGrill® 2.

7. Press the power button located at the bottom of the faceplate

between the < and > buttons for two seconds. The unit will display

“On”, animate and a single beep will sound, indicating that the

iGrill® 2has powered on.

8. Open the Weber®iGrill®App to connect to your iGrill® 2. Tap on the

white iGrill®logo in the black toolbar at the top of the app. Select

your iGrill® 2from the ‘Available Devices’ drop-down.

9. You are now ready to use your iGrill® 2!

Getting Started

Weber®iGrill®App

The Weber®iGrill®App provides all of the functionality and customization

you will need to get the most out of your iGrill® 2. The Weber®iGrill®App is

compatible with the following devices:

• iPhone®(4S and later)

• iPad®(3rd generation and later)

• iPad mini™ (All generations)

• iPod touch®(5th generation and later)

• Many Android™ devices equipped with Bluetooth®4.0 and running

Android™ software version 4.3 or later

You must be running iOS 7+ or Android™ version 4.3 or later on your

device to use the Weber® iGrill® App. Please visit the App Store®or

Google Play™ Store and search “Weber iGrill” to download the free

Weber®iGrill®App.

Once you have downloaded the app, you will have access to links

for instructional videos, step-by-step instructions and FAQs for

troubleshooting.

Battery Replacement

To replace your iGrill® 2 batteries, follow these steps:

• Separate the iGrill® 2 from its base by rmly holding the base with

one hand and gently pulling the iGrill® 2top upwards with the other

hand.

• On the underside of the iGrill® 2, press down on the tab and remove

the battery door.

• Replace the two AA batteries with their negative terminals

compressing the springs and replace the battery door.

Battery Precautions:

• Do not mix fresh and old batteries.

• Do not mix alkaline, standard (carbon zinc) or rechargeable (ni-cad,

ni-mh, etc.) batteries.

• Dispose of spent or damaged batteries according to manufacturer

instructions and local laws.

Powering On & Off

To turn the iGrill® 2on, follow these steps:

• Press the power button located at the bottom of the faceplate

between the < and > buttons.

• The display will animate, and a single beep will be heard, indicating

that the iGrill® 2has powered on.

To turn the iGrill® 2off, follow these steps:

• Press and hold down the power button located at the bottom of the

faceplate between the < and > buttons for several seconds. The

display will show “OFF”.

• Upon releasing the power button, the iGrill® 2will turn off.

Auto Shut−Off:

• The iGrill® 2 will stay powered on for ve minutes before

automatically turning off if there are no probes installed and if it is

not paired to a smart device.

• The iGrill® 2will stay powered on for eight hours before automatically

turning off if not paired to a smart device and if probes are installed.

• The iGrill® 2 will stay powered on indenitely if at least one probe is

installed and if it is paired with a smart device.

Connecting

To connect your iGrill® 2to your iPhone®, iPad®, iPod touch®or Android™

device follow these steps:

• Open Settings.

• Tap Bluetooth®.

• Set Bluetooth®to On.

• While turned on, place your iGrill® 2next to your smart device and

open the Weber®iGrill®App. Your smart device will automatically

recognize any available iGrill®products and display them in the

‘Available Devices’ drop-down. You can view the ‘Available Devices’

by tapping the white iGrill® logo at the top, right−hand corner of

the app.

• Select your iGrill® 2from the ‘Available Devices.’ You will then be

prompted to accept a pairing request. Once you accept, your smart

device will pair with the iGrill® 2 and you are ready to congure your

settings and start cooking!

To connect an additional iGrill® 2or other iGrill®product to your iPhone®,

iPad®, iPod touch® or Android™ device, follow these steps:

• While turned on, place your iGrill® 2(or other iGrill®product) next to

your smart device and open the Weber®iGrill®App.

• Tap on the white iGrill®logo located at the top of the app to expose

the ‘Available Devices’ drop-down. Select the product you would

like to pair with from the ‘Available Devices.’ Your smart device will

display a pairing request. Once accepted, your smart device will

pair with the additional product you choose. Now you are ready to

congure your settings and start barbecuing!

Disconnecting

While turned on, place your iGrill® 2next to your smart device and open

the Weber®iGrill®App. Your smart device will automatically recognize any

available and previously connected iGrill®products. You can display them

in the ‘Available Products’ drop−down by tapping the 3 lines or dots at the

top right−hand corner of the screen.

If your iGrill® 2is connected, it will be listed under ‘Connected Devices.’

If you would like to disconnect your iGrill® 2, you can swipe to the left on

the product name (i.e. iGrill2) to expose the ‘Disconnect’ option.

Tap ‘Disconnect.’

Mounting

• The base of the iGrill® 2is magnetic for convenient positioning on a

cool portion of your grill, smoker or other magnetic surfaces.

• The iGrill® 2can be taken out of its base, rotated 180° and set back

into its base for two different viewing angles.

• The iGrill® 2comes with an optional magnetic disc which has an

adhesive on one side. This allows the iGrill® 2to magnetically mount

to a non-magnetic surface. The magnetic disc has a protective cover

on its face to protect it from being scratched.

To mount your magnetic disc, please follow these below steps:

• Clean the surface thoroughly where the magnetic disc will be

adhered to ensure proper bonding.

• Remove the lm covering the adhesive on the magnetic disc.

• Adhere the magnetic disc to your desired surface.

• Let the magnetic disc bond to the surface for 6-12 hours before

mounting your iGrill® 2to the disc.

• Place your iGrill® 2on the magnetic disc.

The magnetic base is not designed to withstand

high heat and it must be placed on a cool surface.

If the surface is too hot to touch, it’s too hot for

the iGrill® 2base!

Probe Use

• Pro Meat Probes should always be inserted into the thickest, centre

part of the item being cooked for an accurate temperature reading.

• When using the included Pro Meat Probes that are included with the

iGrill® 2, be sure to route the probe wire where it will not be exposed

to ames or temperatures exceeding 326°C. Probes should avoid

temperatures below -30°C.

• When using Standard Meat Probes, which are sold separately,

be sure to route the probe wire where it will not be exposed to

ames or temperatures exceeding 300°C. Probes should avoid

temperatures below -30°C.

• The Pro Ambient Probe, also sold separately, should be clipped

between two grates inside your grill, smoker or oven. Ensure the tip

of the probe does not touch the grates. Also, be sure to route the

probe wire where it will not be exposed to ames or temperatures

exceeding 326°C, and avoid temperatures below -30°C.

• The included Probe Wraps included with your iGrill® 2allow for

convenient storage of your probes and are magnetic so that they

can be stored under your iGrill® 2when not in use.

The coloured probe indicators are for visual identication

of the probe(s) within the app and cosmetic purposes only.

They are not designed for heat safety.

The probes should be cleaned by wiping them down with a

damp towel or sanitary wipe. The probes are not dishwasher

safe. Take care not to get the wiring of the probes wet as

well as the area where the probes’ wiring meets the probe.

The probes are not waterproof and damage may result from

water exposure. Never submerge your probes in water.

Temperatures below -30ºC or above 300ºC will not display

in the Weber®iGrill®App and will cause the probe to

disappear from connection.

Probe Wrap Use

To wrap your probe(s):

• Hold the probe wrap so that the clip segment is on the bottom left

and the logo is legible in the centre of the probe wrap.

• Snap the probe into the probe wrap’s clip, ensuring that the probe’s

body follows the contour of the probe wrap and leaves a 1,27 cm

gap between the probe and the wire channel of the probe wrap.

The tip of the probe should be pointed downward.

• Wrap your probe’s wire clockwise around the probe wrap.

• When you reach the adapter end of the probe wire, it can be

inserted into the probe wrap’s wire channel to secure the wrapping.

Using the iGrill®2

Display

The display of the iGrill® 2 contains the following:

Display

• Displays temperature of currently active probe.

• Displays “DC” for temperatures below -30ºC.

• Displays “DH” for temperatures above 300ºC.

• Displays “OFF” during power off sequence.

• Animates during power on sequence and during reset.

Bluetooth®LED

• Blinks blue when discoverable and awaiting pairing.

• Illuminates solid blue when paired.

Probe Indicator LEDs

• Far left side LED illuminates to indicate Probe 1 temperature is

being displayed.

• Middle left side LED illuminates to indicate Probe 2 temperature is

being displayed.

• Middle right side LED illuminates to indicate Probe 3 temperature is

being displayed.

• Far right side LED illuminates to indicate Probe 4 temperature is

being displayed.

Probe Toggle Buttons

The iGrill® 2has two buttons adjacent to the power button to toggle

between probes when there is more than one probe connected.

• Pressing the < or > button will switch from the currently displayed

probe temperature (as indicated by the illuminated probe indicator

LED) to the next probe.

• Holding either the < or > button down for one second will activate

a cycle that will continuously cycle through displaying each probe’s

temperature.

Autres manuels pour igrill2

Table des matières

Autres manuels Weber Gril

Weber

Weber Spirit E310 CLASSIC Manuel utilisateur

Weber

Weber Premium 67 Manuel utilisateur

Weber

Weber 58444 Manuel utilisateur

Weber

Weber 38044 Manuel utilisateur

Weber

Weber Summit S-640 Manuel utilisateur

Weber

Weber Spirit E210 CLASSIC Manuel utilisateur

Weber

Weber E-210/310 Manuel utilisateur

Weber

Weber Summit Series Mode d’emploi

Weber

Weber Summit E 470 Manuel utilisateur

Weber

Weber Smokey Joe Manuel utilisateur

Weber

Weber PULSE 1000 with Stand Manuel utilisateur

Weber

Weber Master-Touch Premium E-5770 Manuel utilisateur

Weber

Weber 55014 Manuel utilisateur

Weber

Weber BABY Q 100 Manuel utilisateur

Weber

Weber 5000 Manuel utilisateur

Weber

Weber Summit 460 - NG Manuel utilisateur

Weber

Weber Summit E 470 Manuel utilisateur

Weber

Weber IGRILL 2 Manuel utilisateur

Weber

Weber ONE-TOUCH GOLD 30792 Manuel utilisateur

Weber

Weber E-220 CLASSIC Manuel utilisateur

Weber

Weber ONE-TOUCH GOLD 30821_091508 Manuel utilisateur

Weber

Weber Spirit 700 LP Manuel utilisateur

Weber

Weber Genesis Silver A 55263 Manuel utilisateur

Weber

Weber Genesis S-320 Manuel utilisateur

Manuels Gril populaires d'autres marques

Orbegozo

Orbegozo GR 2300 Manuel utilisateur

bora

bora PT11 Manuel utilisateur

Klarstein

Klarstein 10031664 Manuel utilisateur

Garland

Garland MWE3W Manuel utilisateur

Char-Broil

Char-Broil 463722714 Manuel utilisateur

Nexgrill

Nexgrill 720-0830HK Manuel utilisateur

Kenmore

Kenmore 415.16123800 Manuel utilisateur

Camp Chef

Camp Chef PG24CLAU Manuel utilisateur

Tucker Barbecues

Tucker Barbecues GTR Series Instructions de montage

Monogram

Monogram ZGG540NCP1SS Manuel utilisateur

Equipex

Equipex Sodir Savoy Manuel utilisateur

Gaggenau

Gaggenau VR 414 610 Manuel utilisateur

Miele

Miele KM 408-1 Manuel utilisateur

George Foreman

George Foreman GGR50B Manuel utilisateur

AOG

AOG T series Manuel utilisateur

Gorenje

Gorenje TG2000CB Mode d’emploi

Glen

Glen SA 3037 Manuel utilisateur

Stalgast

Stalgast 9730100 Manuel utilisateur

Weber igrill2 Manuel utilisateur

Manuels Gril populaires d'autres marques