Box Wattsense - Installation Guide 2 / 23
• Ethernet switch
• Echelon U60 FT DIN USB Gateway (for LON FT10)
• High-gain GSM antenna
• High-gain LoRa antenna
• GSM or LoRa antenna cable
• Double-sided high performance adhesive tape
• Technical documentation of equipment
• Technical documentation of IoT sensors
• Schematic of the communication network(s) of the BMS
1.4 Computer access to the Wattsense console
• Each customer has a dedicated space on the Wattsense User Console at https://console.wattsense.com. This interface allows
them to manage their fleet of Boxes.
• A Box must have been activated in advance before it can be fully installed and configured.
• If the Box hasn’t been activated, ask the administrator of the account to create an "installation" access on the Wattsense user
console and retrieve the login information (email address and password).
• Once on-site, activate the Box on the console:
–How to Log in to the console: enter the email and password provided by the administrator and click on "Log in".
–Enter the alphanumeric identifier of the Box in the search rectangle at the top.
–Click on "Activate".
–It is required to give the Box a name in the "Name" field (for example, the name of the site where it will be installed).
–If necessary, add additional information in the "Description" field in order to clearly identify the Box (for example the floor
or the precise place of installation if on the same site there are several Boxes).
–Click on "Activate the Box".
• You will then be able to access the configuration tools.
2 The power supply of the Box
Make sure that the Box has been activated beforehand on the user console.
• Ideally, place the Box in an electrical enclosure or cabinet.
• Attach the Box:
–Mount the Box on a DIN rail.
