Watson Desking FAPRS Manuel utilisateur
Step 1
Seiriscreenattaches
to deskwithsix
#10 x1"wood
screws(FIG-1)
provided.
Note:
M2 deskshave pilot
holesforattaching
theSeiriscreen.
Fusiondesksdonot.
Step 2
Pleasenotespacing
betweencenter of
SeiriScreenbracket
andedgeofdesk.
Note:
Wheninstalled,
cordscanpass
underthetrayand
behindthetable.
Step 3
PutSeiribinsonthe
accessoryrail.
Pleaseleavethis
page for theenduser.
Desk Mount SeiriScreen -FAPRS, FARPD
Page 1of 1
M2/ FUSION
#10 x1"
wood screw
1"
1/2"
1/2"
1"
PRODUCTINSTALLATION:
INS21320
M2 /FUSION
WATSONDESKING
800.426.1202 www.watsondesking.com
FIG-1
FASTENERKEY
Step 1
Wall hung units are
pre- assembled.
Steel cleats are
attached to the
walls studs directly
whenever possible
or with "molly bolts"
when apporpriate.
Wall fastenersare
notincluded in
hardware kit.
Step 2
Attach wall cleats
with spacing that
matches the
cleats on the
screen.
shortscreens have
2 cleats, longer
cabinets have 3
cleats.
After securing
cleats to wall with
apropriate
hardware drop
screen down over
wall cleats. Level
as required.
spacingsameascabinet
spacingsameascabinet
WATSON DESKING PRODUCT INSTALLATION:
Wall Mount Seiri Screen
INS50205Page 1
Ce manuel convient aux modèles suivants
1
Table des matières
