W&H 206 Manuel utilisateur
W&H MODEL 206 MOLDER
OWNERS MANUAL
WILLIAMS & HUSSEY
MACHINE CO.
www.williamsnhussey.com
1
OUR PLEDGE TO YOU
Your W&H Model 206 is a quality product and is built to last. Our technical support
services are legendary. Call us toll free. We are ready to help you with any maintenance
or operational questions you may have.
The Model 206 is a new design built in the W&H tradition of ruggedness and durability.
This machine rises above others in its class, in ease of use, compactness, versatility, and
the control over your work that you desire.
Knife changing is so simple that it can be perfectly done in about two minutes, allowing
you to quickly move from job to job.
The machine is manufactured in New Hampshire by people who take pride in making a
superior product. We welcome comments and observations from you on any aspect of the
machine and what you are making with it.
WILLIAMS & HUSSEY MACHINE CO. INC.
70 Powers Street
Milford NH 03055
Or see http://www.williamsnhussey.com
1800 258 1380 603 732 2019 fax 603 732 4048
Customer Service is available Monday-Friday, 8:30 AM- 4:30 PM EST
Complete Revision 6/91
Revised: 12/92
8/95
8/96
6/97
3/03
9/03
10/06
2
TABLE OF CONTENTS
In alphabetical order
SUBJECT PAGE
Assemble stand, motor, switch, and machine 3-10
Arbor in machine head illustration 40
Chatter 32
Feeding problems 34
Feed roller change 38
Feed unit removal 39
Guide system (GS1) installation 12-13
Guide system (GS1) operation 14-16
Guides 26-27
Knife changing/installation 22
Knife sharpening 23
Machine parts illustration 39
Molding 24-25
Parts list 35-36
Picture frames 27
Planing 31
Preparing to use the machine 19
Raised panels 29-30
Roller pressure 25
Round tops 28-29
Safety rules/check list 17-18
Snipe 33
Specifications 21
Sub-Plates 24
Thread locking 37
Vari-Feed operational tips 20
Warranty 41
Wire motor 11-12
3
ASSEMBLY OF YOUR PACKAGE PIECES
Stand parts
1. Fabricated main frame
2. Belt guard
3. belt guard attaching bracket
4. Solid wheels (2)
5. Caster wheel
6. Brake knobs (2)
7. Left hand roller brackets (2)
8. Right hand roller brackets (2)
9. Stock rollers (2)
Hardware
1. #10 screws and lock washers (2)
2. ¼” x 5/8” round head screws (15)
3. ¼” lock washers (19)
4. ¼” nuts (12)
5. ¼” flat washers (3)
6. ¼” x 1 ½” hex head bolts (4)
7. 5/16” x ¾” bolts, nuts, flat washers, and lock washers (4)
8. 3/8” x 2 ¼” axle bolts, flat washers, lock washers and nuts (2)
ASSEMBLY INSTRUCTIONS
Tools needed
Wrench 7/16”---------------Philips screw driver
Wrench ½”------------------Pliers
Wrenches 9/16” (2)--------Razor knife
Blade screw driver---------Wire stripper/crimper
Approximate time to assemble machine package is 3 hours.
Place solid wheels in the channel of the
bottom of the roller stand. Insert the
3/8”x 2 ¼” axle bolts through the holes
provided.
Install the flat washer, lock washer, nut
and tighten.
Install brake knobs in threaded insert on
end of the stand.
Mount castor wheel on its base with
(4) 1/4”x 5/8” round head machine
screws, lock washers, and nuts.
4
Mount the motor on the mount with (4)
5/16” x ¾” long bolts, flat washers, lock
washers and nuts. Do not tighten yet. The
motor is mounted with the shaft end in line
with the cut out for the belt in the machine
mounting area.
Mount the pulley on the motor
shaft
Place the machine on the stand with the pulley
side of the machine over the belt cut out area in
the stand.
5
Bolt the machine base to the stand using
(4) ¼ x 1 ½” long hex head bolts and lock
washers. Use the nuts that held the
machine to its shipping pallet.
6
Install the belt from the machine to the motor
Offset the motor within the clearance of the
elongated slots to find a running position that puts
the motor on the same plane as the bed of the
machine
Align the belt so that the belt travels in a straight line from one pulley to the
other.
Install the belt guard
bracket. Use (2) 10-24 x ½”
screws and lock washers.
7
Take the belt guard and mount it
over the top of the bracket and just
start a ¼” x 5/8” round head screw
with a flat washer in threaded hole
in the bracket.
Lift the guard slightly and start the (2)
lower ¼”x 5/8” round head screws
with flat washers. Tighten all three
guard screws
Mount the vertical
roller support brackets
in pairs, left and right
hand on both ends of
the stand. Use ¼”x 5/8”
long round head
screws, lock washers
and nuts.
The rollers are spring loaded. One end
depresses to allow you to engage the roller in
its set of brackets.
8
Install the two external stock rollers.
Your machine has been
packed with two control
mounting braces and
two #10 flat head
screws, lock washers
and nuts. They are
packed in the box under
the machine head. The
brace shown here is
being mounted to the
top of the black sheet
metal control mounting
enclosure. Use one of
the flat head #10
screws, lock washers
and nuts to mount the
brace on the inside of the sheet metal enclosure with the center counter sunk
hole facing you. The flat head screw goes into the center counter sunk hole. The
lock washer and nut go on the outside, or back side of the enclosure.
9
This view shows the second brace being
mounted to the bottom of the control
mounting enclosure. Use the one remaining
#10 flat head screw, washer and nut mounted
in the center hole of the bracket as you did
with the first brace.
Autres manuels pour 206
2
Table des matières
Autres manuels W&H Raboteuse
